David Herbert Posted October 2, 2018 Share Posted October 2, 2018 I think that a CVRT transmission would be ideal if it can be fitted into the shape of the hull. CVRT final drives might solve that problem too. Good decission to use the Jag engine. It will sound right and fits nicely. David Quote Link to comment Share on other sites More sharing options...
johann morris Posted October 2, 2018 Author Share Posted October 2, 2018 David, Not a bad idea but I wonder where one might source the cvrt components and no doubt, they cost a kings ransom. Anyone know where such items may be purchased? Jon Quote Link to comment Share on other sites More sharing options...
sirhc Posted October 2, 2018 Share Posted October 2, 2018 Try Andrew Baker, https://cvrtpro.com/ Quote Link to comment Share on other sites More sharing options...
eddy8men Posted October 3, 2018 Share Posted October 3, 2018 petrol cvrt engines and gearboxes should be cheap as everyone seems to want the diesel variant. the final drives however might be a problem. i'll ask around for you. a friend in poland has found 60 links of what he was told was panzer 1 track. is it any use Quote Link to comment Share on other sites More sharing options...
sirhc Posted October 3, 2018 Share Posted October 3, 2018 49 minutes ago, eddy8men said: petrol cvrt engines and gearboxes should be cheap as everyone seems to want the diesel variant. the final drives however might be a problem. i'll ask around for you. a friend in poland has found 60 links of what he was told was panzer 1 track. is it any use CVRT final drives are the easy bit to find and they are not expensive. Gearboxes are expensive though, expect to pay £2k for a good petrol one and quite a lot more for diesel. Quote Link to comment Share on other sites More sharing options...
johann morris Posted October 3, 2018 Author Share Posted October 3, 2018 Eddy, The track links would be very welcome, could you find out how much he wants for them, I expect shipping would be expensive. I thought the gearbox and final drives were going to be expensive, it may be back to plan A and cobble something up, in a very English sense. Jon Quote Link to comment Share on other sites More sharing options...
johann morris Posted October 3, 2018 Author Share Posted October 3, 2018 I have just spoken to the gentleman an CVRTpro and it would seem that a CVRT gearbox would be ideal. Jon Quote Link to comment Share on other sites More sharing options...
BRDM Driver Posted October 3, 2018 Share Posted October 3, 2018 Depends how fast you want to go. The other option is go hydraulic motors from an excavator. Much simpler but slow. If Andy Baker can't sort you out for the right price, yet another option is to buy a Samaritan/Spartan sell off the wheels and tracks and anything else you don't need, takeout the running gear and weigh in the hull for scrap. There's also a 432 just come on ebay for a fairly modest amount, at the moment. The Stug builders seem to use 432 running gear. Good power, lower speed compared to CVRT. Quote Link to comment Share on other sites More sharing options...
eddy8men Posted October 3, 2018 Share Posted October 3, 2018 A mate of mine has the cvrt parts. I'll get a price off him. The guy in Poland is asking £25 each for the 60 links Quote Link to comment Share on other sites More sharing options...
eddy8men Posted October 3, 2018 Share Posted October 3, 2018 my mate has come back to me with a price for the cvrt parts. he wants £1k for each final drive and £1750 for a gearbox with clutch Quote Link to comment Share on other sites More sharing options...
johann morris Posted November 12, 2018 Author Share Posted November 12, 2018 Evening All, I have made a start on the track idler wheels, the initial piece of 180mm dia solid, has been following me around for the last 16 years, many times I have been tempted to scrap it but I could never quite bring myself to do it. It has survived a divorce, I have tripped over it, stumped my toes on it and used it for no end of things but at last it's true purpose has been revealed. How it gets from this bearing house to the idler wheel requires a lot of work, a cunning plan and some imagination. 2 Quote Link to comment Share on other sites More sharing options...
BRDM Driver Posted November 12, 2018 Share Posted November 12, 2018 4 hours ago, johann morris said: Evening All, I have made a start on the track idler wheels, the initial piece of 180mm dia solid, has been following me around for the last 16 years, many times I have been tempted to scrap it but I could never quite bring myself to do it. It has survived a divorce, I have tripped over it, stumped my toes on it and used it for no end of things but at last it's true purpose has been revealed. How it gets from this bearing house to the idler wheel requires a lot of work, a cunning plan and some imagination. I have some lumps of steel like that... 3 house moves... one day their true purpose will be revealed! I wonder how long I will keep old CVRT tracklinks.... Looking forward to the next installment! If you're ever down at the Tank Museum, give us a shout! Quote Link to comment Share on other sites More sharing options...
johann morris Posted November 13, 2018 Author Share Posted November 13, 2018 The trouble is, how much do you keep. My wife tells me never to throw stuff away but I have some items that I have no idea what vehicle they are off and the danger is, as I have told her in the past, if one has a random wheel from a dodge, then surly one has to buy a dodge at some point to put it on. In the case of a 2cm flak 30 gun magazine one has to make a tank. Anyone got any Panzer IV bits that they want to donate to a good cause, I know she would love me for that. When I am down at the Tank museum next year I will give you a shout. Jon Quote Link to comment Share on other sites More sharing options...
David Herbert Posted November 13, 2018 Share Posted November 13, 2018 Quote Anyone got any Panzer IV bits that they want to donate to a good cause, I know she would love me for that. I have a NOS Panzer IV track link if that helps..... I know the feeling, my Canadian Ram project started with an armoured filler cap cover. David 2 Quote Link to comment Share on other sites More sharing options...
johann morris Posted December 4, 2018 Author Share Posted December 4, 2018 Look what the Birthday bunny bought me today, as to how its going to be fitted, i haven't got a clue but time will tell. What I need now is two drive shafts. Jon Quote Link to comment Share on other sites More sharing options...
BRDM Driver Posted December 4, 2018 Share Posted December 4, 2018 I hope no one sold you that, saying it was a CVRT gearbox! What's your plans for a gearbox? Going for a full 432 setup? Quote Link to comment Share on other sites More sharing options...
johann morris Posted December 5, 2018 Author Share Posted December 5, 2018 Oh no I have been swizzeled I thought it was...……...no I know its a 430 series steering box. The trouble is that although the cvrt range and the panzer 2 have totally different transmission / steering box arrangements. the cvrt transmission runs across the whole width of the chassis and the drive is positioned behind this, were as the in the panzer 2, the drive is hard against the front of the chassis with the steering box on his right hand side and the drive shaft running across his legs. This box will just fit in the space available, its going to be a tight fit and some alterations are required but I think the advantages out way the extra work required. As for the transmission, final drives and everything else, we will just have to wait and see. Jon 1 Quote Link to comment Share on other sites More sharing options...
johann morris Posted December 17, 2018 Author Share Posted December 17, 2018 Evening All, again, I haven't got a big press or indeed any of the tooling required to produce the cone needed for the idler wheel in one piece so I decided to make it in 8 individual pieces. I used what I could find, a real bodge it and scarper set up but it worked. I used a very old and hard as nails piece of oak, that I planned to the form that I required, as a press form tool. What can I add, I use what I have and none of it is modern or complicated. I am doing quite a bit of machining as I go along to make sure that it all runs as true as possible, so its taking a bit of time. But it's getting there. 4 Quote Link to comment Share on other sites More sharing options...
BRDM Driver Posted December 18, 2018 Share Posted December 18, 2018 Brilliant work! You can see the internal segments on the original wheel, so yours looks 100% What are your plans for track? I wonder what the costs would be to get repro track made in China. From my experience, with aluminium castings, about a 1/10th the cost of UK, likewise with tooling costs. If you did your own finishing and machining even cheaper... Quote Link to comment Share on other sites More sharing options...
David Herbert Posted December 18, 2018 Share Posted December 18, 2018 If you get them Lost Wax cast there won't be any machining other than cutting off the feeder and any vents. The originals would almost certainly have been precision sand cast with the pin holes cored exact size and not bored afterwards. That does result in very rapid initial wear as the high points wear down but speeds up production and reduces cost enormously. This is how British dry pin tracks were cast until we changed over to rubber bushed live tracks for Challenger II. Please, no one tell me that this can't be done, I have watched new Chieftain and Challenger I track being cast and watched the whole finishing process up to dipping short lengths of assembled track into bitumen paint. But it does require very close quality control and scale to do it properly so not really practical for a single vehicle set. David 1 Quote Link to comment Share on other sites More sharing options...
johann morris Posted December 19, 2018 Author Share Posted December 19, 2018 BRDM, where did you go to get yours cast, any information on the company would be appreciated. David, you are of course correct, much the same principle as the lost foam process and I would agree that no one is going to tool up for that process for 230 links. I am coming to, I my opinion, the 4 most expensive parts of the project, the tracks, having the polyurathane applied to the wheels, the springs and the final drives. The springs, I think I have a plan for, the rest is some time off but I need to start considering my options and I can do that as i finish the Morris. The finished article, well almost. I have still got to make the end cap and the oil seal retainer for the rear of the bearing housing. 2 Quote Link to comment Share on other sites More sharing options...
BRDM Driver Posted December 19, 2018 Share Posted December 19, 2018 My experience was with Aluminium die casting for a non-tank related product. Tooling is usually eye watering! China will do it for a LOT less. There also places in the UK that may do a modest run of sand cast parts. It would be worth having a google to see if there is a foundary near you. We have a small foundry down here in Dorset that does Steam engine parts etc, mainly cast iron and aluminium though. The Weald foundation got thier Renault FT track links made - they would be able to point you to someone too. If you can find some other restorers that would be interested in repro track, you might be able to get a decent size order together. (maybe try Bruce Crompton). Dealing with China is not easy. You really need to go there. But they can make anything as long as you want a container full! The other option is to find a UK based foundry that's already farming work out to a trusted chinese plant. Quote Link to comment Share on other sites More sharing options...
BRDM Driver Posted December 19, 2018 Share Posted December 19, 2018 A quick google found Blackwood Engineering, who use chinese foundrys. They are in Aberbeeg, Gwent . They can cast steel as well as iron and aluminum. No idea what cost you'd be looking at, but the trick would be to get some other restorers interested and get a decent order size. A thousand links for example.... Quote Link to comment Share on other sites More sharing options...
johann morris Posted December 19, 2018 Author Share Posted December 19, 2018 Thanks for the lead, I will follow it up. I know all about the costs of dies for aluminium die casting as I was a development engineer in a foundry for 13 years. Being cast iron, these would be sand castings with the relevant finish machining, its just a shame that so much of the British casting industry has gone. In actual fact, a thought has just passed into my tiny brain...……... Jon Quote Link to comment Share on other sites More sharing options...
draganm Posted December 19, 2018 Share Posted December 19, 2018 38 minutes ago, BRDM Driver said: If you can find some other restorers that would be interested in repro track, you might be able to get a decent size order together. (maybe try Bruce Crompton). They just had brand new Panther track made, I have heard numbers in the 1/4 million Euro range for a full set, made in Germany I believe. Hopefully Pz1 or Pz II is a lot less http://www.axistrackservices.com/contact Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.