phil munga Posted December 31, 2009 Share Posted December 31, 2009 (edited) Happy new year to all from me at this end ,, Mark whats with your new Avatar :-D and is that Mutley in the front Edited December 31, 2009 by phil munga Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted December 31, 2009 Share Posted December 31, 2009 fancied a change mate ( from the whacky racers, army surplus special ) ... not mutley mate ...... Quote Link to comment Share on other sites More sharing options...
munga stump Posted January 1, 2010 Share Posted January 1, 2010 Happy new year to you all:-d Quote Link to comment Share on other sites More sharing options...
munga8 Posted January 2, 2010 Share Posted January 2, 2010 well santa has been but not left the grille part:-(. still want one please Mark, I have 3 but they are all very rusty and would need a lot of metal work? How bad is the one you have? Will Quote Link to comment Share on other sites More sharing options...
munga8 Posted January 2, 2010 Share Posted January 2, 2010 Hello, anyone going to the Dallas digout? Will Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted January 2, 2010 Share Posted January 2, 2010 Mark, I have 3 but they are all very rusty and would need a lot of metal work? How bad is the one you have? Will hi mate , the flat part of it that has the bolt holes in , is missing in places ..... Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted January 3, 2010 Share Posted January 3, 2010 Popped round to my dads this morn, took couple of pics .:coffee: Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted January 3, 2010 Share Posted January 3, 2010 (edited) Need the horn wire and whatever bits that go under the button if anyone has anything , cheers guys . Mark Edited January 3, 2010 by Willyslancs Quote Link to comment Share on other sites More sharing options...
phil munga Posted January 3, 2010 Share Posted January 3, 2010 Mark is that the grill you have it only looks to want some new tin letting in , might have to make do till you find a better one , mines been welded up and not very well , I would say the weld was more like crow5hit , if yours is past repair for temp fitment good luck in finding a replacement Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted January 3, 2010 Share Posted January 3, 2010 will have to see what we can do with it mate. told my dad to drop it off at a welder he knows , i think it will repair now i have had a proper look at it . still fancy a better one tho if its possible. Quote Link to comment Share on other sites More sharing options...
phil munga Posted January 6, 2010 Share Posted January 6, 2010 got the clutch put back together today lined it up using a gearbox input shaft from a nineties VW camper , will be ready to go back in soon ,, Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted January 9, 2010 Share Posted January 9, 2010 For all the guys who have my old mobile number , please pm me for my new number , please keep in touch guys , still need bits !! Cheers lads! Mark Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted January 11, 2010 Share Posted January 11, 2010 needs some pics please of the doors in situ, also the fittings that go in the holes on the side of the body ..(any pics that show how the doors fasten ,install etc) cheers guys:cool2: Quote Link to comment Share on other sites More sharing options...
phil munga Posted January 11, 2010 Share Posted January 11, 2010 Hi Mark, if I get over this week I'll try and get some pics Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted January 11, 2010 Share Posted January 11, 2010 That would be great phil , cheers mate . if there are any tatty doors out there i would like to use them as a template if poss .. Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted January 12, 2010 Share Posted January 12, 2010 The grille outer has now been welded and primered , its looking good .Dads Also sorted out the flag holders for the ends. he s been in garage today and found half of it under 2 inches of water . Plumber mate been and sorted it ,(weather burst a pipe) so now just drying stuff.(munga,willys,trailer no1 ok). Quote Link to comment Share on other sites More sharing options...
phil munga Posted January 12, 2010 Share Posted January 12, 2010 Got a few pics not great it was dark and I was on a flying visit to pic a friend up that arrived early , will be over again latter this week with a better camera this pic shows where the rear door connects the front lower bracket front top bracket on windscreen frame with door in place lower front door in place Hope these pics are of help Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted January 12, 2010 Share Posted January 12, 2010 cheers mate , hopefully they will be , his eyes not brill these days but hopefully he can work them out... Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted January 23, 2010 Share Posted January 23, 2010 not much munga stuff done at the mo im afraid.Due to the water leak, dad has started to sort out the garage.(he found some keys the other day he last saw 20 years ago!!!).will be selling some unusual items soon probably (he use to have a militaria shop many years ago,will post any items he wants to get rid off on here). The best thing to come out of today ,was i managed to get the Willys out and fired up (first time since end of sept) ...... Quote Link to comment Share on other sites More sharing options...
phil munga Posted January 23, 2010 Share Posted January 23, 2010 Mark that must have been good to get the wills out :-) ,, Will the keys still operate what there made to fit :-D Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted January 24, 2010 Share Posted January 24, 2010 (edited) Yep was brill getting the willys running (oh how we love the smell of canvas,grease and exhaust fumes!got the smell all over , partner not to happy going shopping after smelling of Jeep!) dont know where his keys are for mate (best not to ask sometimes lol) he also found a sykes pickavant pipe bending machine he never knew he had !!!:shocked: bless him lol!! Edited January 24, 2010 by Willyslancs Quote Link to comment Share on other sites More sharing options...
MUNGA DREW Posted January 31, 2010 Share Posted January 31, 2010 Can anyone help me find were i may get a crank shaft recon for one of my mungas keep looking on ebay no look hope to hear from some one.cherrs andy Quote Link to comment Share on other sites More sharing options...
phil munga Posted January 31, 2010 Share Posted January 31, 2010 (edited) Hi and welcome, Think it'll have to be a good engine engineering company , are the cranks pressed together like a motorbike crank ? seem to think there was a picture showing one but don't quite remember if the big ends can be unbolted , Edited January 31, 2010 by phil munga Quote Link to comment Share on other sites More sharing options...
MUNGA DREW Posted January 31, 2010 Share Posted January 31, 2010 CHEERS PHIL GOT 3 CRANKSHAFTS ALL NEED REBUILDS AS BEARING NO GOOD THE CRANK AND BEARING ARE ALL PRESS ON .CAN GET RECON FOR GERMANY FOR ARROUND £650 LOT OF MONEY.:embarrassed: Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted February 14, 2010 Share Posted February 14, 2010 hope all munga owners are ok , bit quiet here at mo(dad busy sorting out the stuff in garage so not touched the munga) :wave: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.