schliesser92 Posted September 11, 2010 Share Posted September 11, 2010 Nice job! How many of these were in service? Forgive my Pommie ignorance, but who exactly is Mick Doohan ?? :-D:-D Quote Link to comment Share on other sites More sharing options...
protruck Posted September 11, 2010 Share Posted September 11, 2010 schliesser92. Quote)Forgive my Pommie ignorance, but who exactly is Mick Doohan ?? :-D. Mike Doohan is 5 times moto GP world Champion from Brisbane Australia. Clive Quote Link to comment Share on other sites More sharing options...
Lord Burley Posted September 11, 2010 Share Posted September 11, 2010 Some really, really impressive restorations....:thumbsup: Quote Link to comment Share on other sites More sharing options...
daz76 Posted September 11, 2010 Share Posted September 11, 2010 What a lovely restoration. You must be really pleased. :-D Quote Link to comment Share on other sites More sharing options...
DJM110 Posted September 12, 2010 Share Posted September 12, 2010 G'day All, Many Thanks for the kind words re 'restoration work' but I'm just an amatuer,:nut:. How many of these 109" S2A Ambulances were in service, there were 188 built, quite a few did 25 years service before being replaced by the 6x6 Perentie Ambulance. They were nicknamed 'Bloodbox' by the troops in Sth Vietnam, my 'Bloodbox' went into service in November 1966, and the records at the AWM (Aust/war/memorial) do not show when it was decomissioned. In a previous post I said I was going to the 'Broke Village Fair', well it's come n gone for another year, here are 2 pix + short video clip enroute in my S2A 88" gunbuggy, whats a 'Gunbuggy' it's a 106MM recoilless rifle carrier (but more about that later) 112-501 below 112-655 below a short clip (albeit not a very good one, enroute to Broke Saturday 11/9/2010) 'Chloe' can be seen very briefly in the rear view mirror,,. http://www.youtube.com/watch?v=_Qs-BJrXWSY anyway cheers for now Dennis ps pix were taken Saturday arvo, the Fair was today 12/9/2010,. Quote Link to comment Share on other sites More sharing options...
rambo1969 Posted September 12, 2010 Share Posted September 12, 2010 Great job there fella Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted September 12, 2010 Share Posted September 12, 2010 G'day All, Many Thanks for the kind words re 'restoration work' but I'm just an amatuer,:nut:.How many of these 109" S2A Ambulances were in service, there were 188 built, quite a few did 25 years service before being replaced by the 6x6 Perentie Ambulance. Hi Dennis, Very nice restoration, well done, and your others are also great. When I first saw one of those ambulances, I thought how useful they were with the access right through, unlike the British army version. The ambulance seen here, I am sure you probably know. The owner being quite a character, not been in touch with him for a long time, so if you see him please pass on my regards. :-) Quote Link to comment Share on other sites More sharing options...
DJM110 Posted September 13, 2010 Share Posted September 13, 2010 (edited) G'day All, This was restoration No4, it is a 88" Series 2 Land Rover fitted with the early 2.25lt 4 cyl petrol engine, it went into service in 1959 and was decomissioned on 20th October 1967, it was purchased by a chap who used it as a shooting vehicle up the Nth West of NSW aka 'the outback'. It had a hard life chasing feral pigs and kangaroos off wheatfields etc, just about every panel was damaged, along with numerous other problems, it was discovered sitting forlornly in a shed by my son Kyle when he was on a shooting trip to the same property, and being the good lad he is took some pix for me and I bought it sight unseen, thats always a bad idea in hindsight as I paid way too much for so little :shocked: anyway some pix as found, my old mate Graham D looking over the prize LOL it had sat for years as you can see by the accumulation of dust on it I towed it out of the shed with my Isuzu 110, it looked worse out in the daylight, covered in wasps nests and spider webs and damn big spiders at that, with a little ingenuity and know how I managed to get it running, it was losing water through a welsh plug (core plug), the clutch and brake M/cyl still had fluid in it, I didn't bother with the brakes but believe it or not, the clutch kinda sorta worked and I was able to get it onto a car float for the long return journey home, the trip was approx 1,500k's and it had it's dramas as well, we lost (punctures x 4) on the trailer and we were stranded until my wife came to our rescue about 30 miles from home, next pic shows us on the roadside with no spare tyre for the trailer 110-850 went into storage as I was still working on the 'Bloodbox' 114-194, so I had an idea what I needed for the job so at various times I went looking for the bits I would need to complete this task as well. 110-850 got the full 'Monty' just like the rest of them, it took approx 12 months of slog to get it almost finished (well are they ever finished) the strip down starts, rolling chassis again waiting for all the mech/parts, extensive tubworks, new floor insitu body panels etc painted, rewired etc etc etc fitting a modified S2A exhaust system, the almost finished job, a far cry from what it looked like, 110-850 was a pleasure to drive until recently, I haven't had the time to look but it is making some horrible noises in the gearbox, not sure what has gone wrong as yet so it's tarped up waiting again LOL cheeers Dennis ps here is a short clip of 110-850 following one of my other Land Rovers, it was over 100f on the day extremely hot we just plodded along at around 40MPH, there were numerous bushfires about as you can see the smoke haze,,. pps Richard I will pass on your regards to Warwick L,,. Edited September 13, 2010 by DJM110 Quote Link to comment Share on other sites More sharing options...
DJM110 Posted September 13, 2010 Share Posted September 13, 2010 Restoration No5 (partial) G'day All, When this little gem of Australian Military history came up for sale, I knew I had to have it, and eventually that came true. I bought it from a chap who was in the military and used it as his personal transport out in the field. 112-655 had stood for a while and needed some remeadial work on it mainly brakes & clutch to make it operational again, I was working on 110-850 when it came along, so work stopped temporarily whilst I got 112-655 working OK. The 106RCL is a much sought after vehicle, they converted 69 Land Rovers to carry the 106mm recoiless rifle, there were 24 Series 2 types and 45 Series 2A types, I can only account for about 11 of them, a few in private hands (1 with a de-ac 106) all others in private hands AFAIK do not have a 106mm fitted, museum pieces have the 106 fitted. 112-655 is an absolute dream to drive on a cool evening on some of the quiet country roads around where I live, you do get a lot of looks from people when out mixing with the traffic, a couple of pix of 112-655, a Series 2 type Gunbuggy in country Sth Vietnam this picture shows my good mate Wayne R standing holding the GPMG M60, the 106mm was removed and used for perimiter defence, and it's role changed to 'convoy escort', bravery required here no protection at all fully exposed position, the Series 2A type (note on the S2 it has uncut wings) with all it's kit, picture taken in country (Sth Vietnam) out behind Nui Dat, in between working on Land Rovers I did restore 2 Aus/mil trailers, I knew I could knock over a trailer in under 5 weeks, so just for a change of pace and something different i did just that, will post some pix later cheers Dennis Quote Link to comment Share on other sites More sharing options...
chevpol Posted September 13, 2010 Share Posted September 13, 2010 allways liked the gun buggy, very unusual, nice collection you have there Mark Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted September 13, 2010 Share Posted September 13, 2010 pps Richard I will pass on your regards to Warwick L,,. Thanks Dennis :thumbsup: Enjoying reading about your projects, keep 'em coming. regards, Richard Quote Link to comment Share on other sites More sharing options...
AndyFowler Posted September 13, 2010 Share Posted September 13, 2010 Lovely job Dennis ! You're a restoration whirlwind ! Very inspirational ! Quote Link to comment Share on other sites More sharing options...
DJM110 Posted September 15, 2010 Share Posted September 15, 2010 G'day All, Many thanks for the compliments re my restorations, but I never lose sight of the fact that I'm just a amatuer (Reg/nse), anyway I'm having another short excursion into the vast interior of this great land called Australia. I have removed the rear bench seat from my 110, and replaced it with my homemade frame so I can sleep in the back of the Land Rover, I anticipate that I will be away from home for at least 2 1/2 days, leaving at 0100hrs (Thursday 1600hrs local time UK) on Friday 17/9/2010 and arriving at my destination at approx 0600hrs, that will be a tad early for the farmer so I will boil my 'Volcanoe' kettle (bought from Slavins up in the Nth East of England 1993) and have a cup or 2 of tea until I hear/see some signs of life around the house, then I will let myself loose on dismantling a couple of Landrovers for the bits I need for restoration No8, main item on the agenda is a S2/2A 4cyl bulkhead thats the 1st priority, then other smaller items, I will upload pix of the trip when I have returned and recovered. The 110 is now packed and ready to roll, 140lts of diesel on board all manner of tools, gen/set, 2 angle grinders if I need them, + heaps of other items needed for this type of recovery, a round trip of approx 900K's (450 miles) nothing is close in Australia LOL:nut: anyway wish me luck etc cheers Dennis:whentitsdone: Quote Link to comment Share on other sites More sharing options...
Rover8FFR Posted September 15, 2010 Share Posted September 15, 2010 Bon Voyage Mate! Look forward to more pics. Regards Wayne Quote Link to comment Share on other sites More sharing options...
chevpol Posted September 15, 2010 Share Posted September 15, 2010 yep, good luck Mark Quote Link to comment Share on other sites More sharing options...
DJM110 Posted September 18, 2010 Share Posted September 18, 2010 (edited) G'day, I had a last minute change of plan, and was able to get the journey underway at 1600hrs last Thursday (16/9/10 instead of the original schedule of a 0100hrs start Friday 17/9/10), this allowed me to have a rest/sleep before starting any work, I arrived at my destination at around 2140hrs, I found a suitable spot on the side of the country road and settled in for the night, it was cold, 2c Motel 110 I placed a canvas sheet over the engine just in case it dropped below zero, I was awake at 0520hrs, but I doubted that the farmer would be up at that hour, so I lay there watching sheep and kangaroos grazing, then around 0645hrs I got up boiled the kettle, my Volcanoe kettle, I drove the last few kilometers to the property and set about the task of dismantling to retrieve a bulkhead, I set myself up in amongst all these Series Land Rovers about 20 of them, in varying states of disrepair I undid most bolts but some of the floor screws especially those across the front of the floor, had to have their heads ground off, I suppose driving through sheep/cattle n horse droppings etc and never being hosed/cleaned does take it's toll on parts of the vehicle, anyway this was donor No 1, and after approx 1 1/2 hours it looked like this I had also been chasing a few hard to get items, that were on a S2 88" Comm/Recon car, I did a deal and removed quite a few items off it, I need to go back and buy all the Lucas front lights etc, this pic shows the gutted interior, it has less now :-D the vehicle pictured I have traced it's ARN (army rego number) 110-572 disposal date 20/5/68. I had in the back of my mind that since I had gone all this way on my own, and packed a plethora of tools etc, I might have a go to remove a second bulkhead, I made my intentions clear to the owner of the property he said I think you might be pushing the envelope to get that accomplished before dark, anyway me being me pushed on, donor No 2, and a while later (read 1600hrs) it looked like this, I can tell you all, I was feeling a tad tired (I'm 61 y.o) and after working flat out all day, I needed the owner to hold this bulkhead upright (it was slipping sideways along the top edge of the trailer) so I could load it into the trailer, at some point around 1640hrs I loaded a knife edge bonnet onto the roof rack of the 110, tied it down, did an emu bob (good look around for tools on the ground etc) and I was satisfied that I had retreived all my tools, I said my good-byes with a promise to be back asap to collect a few more parts and part with some cash of course, I hit the road for the return journey Friday at 1710hrs, almost exactly 5 hours later I arrived home, unpacked camera gear and a few small items, greeted the good wife, had a shower and hit the sack. Bright and early this morning I washed her car, then started to unpack the tools etc, after carefully going over what I took, I couldn't find the chuck key for the drill, then I remembered that it could be in a tool box that I had been putting nuts n bolts etc in, sure enough there it was, good I thought, but it was short lived, I had left my safety glasses behind, so I will ring the farmer tonight and ask him to look around donor No2, as thats where they will be. My son in law came over to help lift the 2 bulkheads out of the trailer, they will both need some remeadial work on them :-( but I knew this when buying them, at least they are not rusted out up along the top rails, 2 donors sitting waiting to be stripped further, all of this work is for my current project Restoration No 8, which I haven't mentioned as yet, anyway I hope this isn't getting boring cheers Dennis PS I will have to do a service on the 110 before the next country jaunt takes place:-D pps I have just scrutinised the picture of Donor No 2, and my safety glasses are on the ground, in the picture rhs there is a lenght of aluminium a steel welsh plug and part of a tyre showing, well just below that they are sitting on the ground, they are clear thats why I couldn't see them with the light fading, just hope that none of those shetland ponies stand on them,,. Edited September 18, 2010 by DJM110 ARN information on S2 C/R Quote Link to comment Share on other sites More sharing options...
abn deuce Posted September 18, 2010 Share Posted September 18, 2010 Please continue ! Its great to see whats going on so far from where I call home . To be honest from reading and watching the entire thread up to where you gave your age I had thought you were a much younger gentleman , My hats off to YOU ! Quote Link to comment Share on other sites More sharing options...
DJM110 Posted September 19, 2010 Share Posted September 19, 2010 G'day All, a few posts back I mentioned that just for a change of pace, I knew I could fully refurbish a variant of the No 5 type trailers in a short space of time, well I have 3 variants of the No 5 trailer, this particular one is designated as 1/2Ton Platform Electrical repair Census No 6017B. This trailer was purchased at the same time I bought 114-194 (S2A 109 4 Stretcher Ambulance) it went into storage at a mates place in Morpeth NSW, I retrieved it one afternoon and bought it home, work started on it the next day, I never let the grass grow under my feet I'm a nutter :nut: :nut: LOL the short trip home behind the 110 the next day it was stripped to it's component parts, the chassis the 1/2 ton platform body, a rivet counters delight LOL:nut: all this was achieved back in 2005, so my memory could be just off with finite details, but I seem to remember we had more rain than we usually get, but we did manage to keep on track, grit blasting was the order of the day, Illmenite was used 1st class stuff the grubby 'B' is me that was a Friday, I know that for certain, as I used to at the time only work a 4 day week, anyway it was full on for the next few hours etch priming it all, then 2 coats of Olive Drab the next day, chassis first, then the tub, the Land Rover under the covers is 110-850 (Lady S2 Comm/Recon) as I said I needed to change pace :nut: back together again and looking smick attention was turned to the hoodsticks, these are very different to the normal types fitted to Land Rovers, these extend upwards by approx 600mm, and it has a rear extension as well, basically what this allows for was a covered work area, that could be full sealed for light etc, it has a plethora of dutch laced canvas and poles/ropes etc etc the CES schedule is quite lengthy, a picture of the hoodsticks fitted with a NOS canvas, you can see the canvas extensions hanging down, this canvas would cost at todays prices at around $6,000.00Au all finished, now all it needs is a S2A 109 Workshop truck to drag it along :-D, well that happened a little later, cheers Dennis ps I just wish I could restore items as quick as I can upload pix here,,. Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted September 19, 2010 Share Posted September 19, 2010 very nice looking trailer mate, keep the pics coming ......... Quote Link to comment Share on other sites More sharing options...
ruxy Posted September 19, 2010 Share Posted September 19, 2010 G'day , you have some most interesting trailers in Oz , that No.5 variant tub seems to utilize Land Rover tub cross-members ? Seems they wished to keep the weight well below a Sankey. Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted September 19, 2010 Share Posted September 19, 2010 Good work Dennis :thumbsup: Thing that always surpised me with those trailers, is that they are unbraked. Quote Link to comment Share on other sites More sharing options...
DJM110 Posted September 21, 2010 Share Posted September 21, 2010 (edited) G'day All, Here are a few pictures of one of my No5 1/2Ton trailers, this one was a little rough, it needed remeadial work on the tub + it had a bent drawbar probably caused by jack knifing when under reversing the trailer, as purchased from Warwick L a well known dealer of ex-mil gear here in NSW/Oz, one of the first tasks was to strip it of it's fittings etc, ARN 154-520 stencilled on frame the tub floor was a victim of neglect rusty wasn't the word I would have used but it will do buckled/bent fits in with description as well, the new floor section was carefully marked out, cut and refitted into place, I don't have any pix of the tub being grit blasted etc, but the tub n chassis was grit blasted using Illmenite, great media but filthy stuff, tub etch primed/undercoated and painted Olive Drab (along with the chassis) attention was now turned to the draw bar it was bent remember, a good mate rewelded it for me after I made a sleeve to fit inside the tube, it was plug welded and welded around the circumference of the tube, flap sanded back weld cannot be seen the almost finished job all it needed now was the bridge weight disc, hoodstick, canvas cover and behold from the rear with ARN (repro) and a genuine 'Convoy Ahead' sign I had been waiting for the repro 'Ordinance factory' makers plate and here it is with the bungs fitted the trailer will hold ?? gallons of water, troops have used them full of water to cool off in, they will also float, but mine has done neither of these feats, anyway cheers Dennis ps Richard Farrant, yes all the No5 trailers were unbraked, I have only ever seen one modified no5 with brakes, and I was told it was a 'Bomb Disposal' trailer, it weighed heaps, the trailers used by the fleet of 101 Rapier missile jobs and light boats etc were braked,,. Edited September 21, 2010 by DJM110 Quote Link to comment Share on other sites More sharing options...
DJM110 Posted September 21, 2010 Share Posted September 21, 2010 G'day All, This vehicle was the 6th restoration I undertook, I purchased the Land Rover during 2003 (while doing 114-194 4 Stretcher Ambulance), it was a basket case, rusty bulkhead and chassis that had a lot of rot, previous owner was a beach fisherman, salt water/sand are great chassis killers. The Land Rover had undergone some modifications (at unit level during it's service life) it had a modified cage on the back with an altered canvas which was pretty rotten, I needed to get rid of the rubbish asap so I stopped working on the 'Bloodbox' for a short period while I attended to this task, once done the Land Rover went into storage about 1 mile from home in a friends shed (all I had to do was mow the grass), it sat in there for approx 2 years before work commenced in ernest, at home before removing rotting canvas etc the canvas had rotted off over the cab, so just use your imagination as to what the inside looked like, seats fell to pieces, bulkhead rusty etc etc, anyway off to storage it went, I looked in on it every so often, at least it was out of the weather and dry, the shed, my 110 was pressed into service to retrieve the 109 when I had to move it yet again as my friend moved away, so I stored it out in the open with a canvas cover over it for a period I used to visit the 109 from time to time and just tell it one day you will look like this, it's just a matter of time, :nut: (I know I'm a nutter :blush:) being parked on grass doesn't do it any favours either, thats why it's sitting on galv/iron even though the chassis was rotted out etc. While this vehicle sat around doing nothing, I didn't, I needed to find a bulkhead and chassis, a chassis was found only 5 miles from home (it was a story all on it's own) the bulkhead was picked up in Cobar NSW about 360 miles (approx) from Cessnock, I knew of it's existence in Cobar as I had seen the Land Rover parked there for some years (very dry out west) as I travelled to n fro on shooting trips to Tilpa. On our way back from a Land Rover gathering in 'Blinman' South Australia in 2004, I asked about and found the owner of the L/R, the princley sum of $25.00Au changed hands and about 1 hour later it was on the roof rack of the 110 heading East for a new life JFIS the hand throttle in the picture is now on a Land Rover back in the UK, I gave it to an enthusiast about 3 years ago this is the donor chassis found in Kurri Kurri about 5 miles from home, the chassis was perfect but the bulkhead on it wasn't, so it went to scrap when it was stripped down, I stored it in the carport standing on it's rh side out of the weather, end of part 1,, cheers Dennis Quote Link to comment Share on other sites More sharing options...
DJM110 Posted September 28, 2010 Share Posted September 28, 2010 (edited) G'day All, A few more words and pictures of my S2A 109 Wksp, this is the donor chassis as the original was US, it was grit blasted on a Friday morning (I helped as always) back home approx 1300hrs, etch primed and put into storage for about 18 months as I was still doing my S2 88" C/R ( I think :embarrassed: ) anyway it was taken out of storage and moved approx 7 yards into the backyard area, where I jacked it up onto my stand so as to facilitate ease of work, the chassis recieved 2 coats of Gloss Black, a picture in waiting first, I can distinctly remember starting to apply the black paint to the chassis on a Tuesday afternoon and by Thursday evening I was ready to refit the chassis with springs and diff/assemblies this is Fridays effort thats the S2 with the white cover (I was working on the exhaust system) the rear tub off the 109 is in the background as well as the $25.00Au bulkhead I bought in Cobar (Outback NSW) it was a rolling chassis by the next morning, (Saturday 11/3/2006) the hold up:embarrassed: what held me up from finishing on Friday evening was I couldn't find the 6 locking tabs that secure the front stub axles to the spindle housing, my problem is I'm colour blind, and as I paint everything mechanical (both sides) black, the tabs were sitting on the cardboard that I had painted them on, but I couldn't see them :embarrassed::shocked: anyway I didn't think that it was a bad effort for just a few hours each afternoon to culminate in a rolling chassis. I kept slogging away at it everyday, I clearly remember working over the Xmas New Year in 40+ C heat, the only good thing was that the etch prime flash dried and the Gloss Black just about baked itself. The bulkhead needed repairs and grit blasting/painted, all this was accomplished over the next few months, refitted to the chassis along with a new wiring harness from Vinwire here in Australia (LR611 to suit a S2/2A military L/R), new brake pipes were made up by me, I love trying to work out the length and where the bends have to be, A lot of water had gone under the bridge so to speak, and quite a lot of refurbished land Rover parts went back into service on 172-562. Being a Electrical wkps vehicle, it was fitted with all manner of tools requiring a electrical switchboard, mounted on the rhs rear of tub in a cubby hole with a cat flap all in A1 working condition. The RAEME vehicle was attached to 2 Cav, (inverted triangle, RAEME spanner inside it) it was the A (alpha vehicle) Tech/supp, with call sign 'T' Tassie Devil, it does look good hooked up with it's matching No5 Platform trailer don't you think, I have all the nessacery canvas pieces/ropes etc to enclose the 2 bodies, but it's a PIA to put up and I don't have any pix of my own, but some from REMLR, anyway 172-562 note it doesn't have the spanner nor call sign on wing, a few inservice pix cheers Dennis Edited September 28, 2010 by DJM110 Quote Link to comment Share on other sites More sharing options...
abn deuce Posted September 28, 2010 Share Posted September 28, 2010 :bow: Well Done :bow: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.