robin craig Posted December 19, 2014 Share Posted December 19, 2014 Here are two fire extinguisher brackets, both fit the same type, the one that spanned likely the longest period of time for most of us who have been in the hobby. I was up at the Cold War Collection yesterday and saw this newer style. The basic differences seem to be a red indicator stem that get broken (I assume) when the extinguisher gets pulled out of the bracket and the other is the release tab has gone from fabric to stamped metal. Is this a generational improvement? If so when did they come in to use? If if what a usage specific change, what were they used in? Where can one get the red indicator stems? Some of us are a bit fastidious about getting details correct. Any help / explanation gratefully accepted Thanks Robin Quote Link to comment Share on other sites More sharing options...
sirhc Posted December 19, 2014 Share Posted December 19, 2014 Robin, I know Marcus Glenn was selling those brackets with the red tab on the end a few years ago. Never seen them fitted to a vehicle though as released from the mod, and we've had a fair few now. Chris Quote Link to comment Share on other sites More sharing options...
antar Posted December 20, 2014 Share Posted December 20, 2014 Robin, I know Marcus Glenn was selling those brackets with the red tab on the end a few years ago. Never seen them fitted to a vehicle though as released from the mod, and we've had a fair few now. Chris Ditto what Chris says, had and seen plenty of vehicles over last few years but not seen the one with the red tab fitted to anything. Quote Link to comment Share on other sites More sharing options...
Brewstop Posted December 20, 2014 Share Posted December 20, 2014 Ditto what Chris says, had and seen plenty of vehicles over last few years but not seen the one with the red tab fitted to anything. That type of BCF extinguisher was banned in the early 90's by the Montreal Protocol, most of them in Land Rovers and Bedfords were replaced by 2kg dry powder extinguisher, these were larger and a pain in Series 3s as it was fitted in the passenger footwell, it got in the way and the clip caught the back of your heels! Quote Link to comment Share on other sites More sharing options...
sirhc Posted December 20, 2014 Share Posted December 20, 2014 Sandy, They are still used on 'A' vehicles - our Spartan came out of service a little over 12 months ago fitted with them inside. Chris Quote Link to comment Share on other sites More sharing options...
robin craig Posted December 20, 2014 Author Share Posted December 20, 2014 The Stormer we have have them mounted to the seats, I was surprised to see them myself as the outside of the same vehicle has the larger new type. So we have established that they exist but do not have a sighting of where they were to be used. Interesting R Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted December 20, 2014 Share Posted December 20, 2014 I have vague recollections from back when working for military, that although BCF was banned, there are/were exemptions due to it being safer to use in enclosed area, ie inside an AFV. I think the Halon type of extinguisher superseded BCF for general MT exterior use, but then that was banned under the Montreal Protocol. Might not have this totally correct, but some things get forgotten over time if of no great importance! (sent to brain's recycle bin!) Quote Link to comment Share on other sites More sharing options...
robin craig Posted December 20, 2014 Author Share Posted December 20, 2014 So, even more great info, thanks Richard. Now the last pieces of the puzzle to be solved, what was the intended application for these brackets and where do the red telltales come from? Someone must know R Quote Link to comment Share on other sites More sharing options...
Starfire Posted December 21, 2014 Share Posted December 21, 2014 I don't know how you would work with the red tell-tale, as you're supposed to pull the extinguisher out fairly regularly to check the indicator button on the bottom. Cheers, Terry Quote Link to comment Share on other sites More sharing options...
Brewstop Posted December 21, 2014 Share Posted December 21, 2014 Sandy, They are still used on 'A' vehicles - our Spartan came out of service a little over 12 months ago fitted with them inside. Chris Quite right, our Sultans had them, there isn't much else available that has the same flame killing ability. Quote Link to comment Share on other sites More sharing options...
robin craig Posted December 21, 2014 Author Share Posted December 21, 2014 What wonderful positive answers from all of you. Stupid me, I made the mistake of posting an enquiry over on the ARRSE forum on the same subject. Don't think the moderators over there are doing their job. Makes me glad of HMVF Thanks R Quote Link to comment Share on other sites More sharing options...
Toner Posted December 21, 2014 Share Posted December 21, 2014 What wonderful positive answers from all of you. Stupid me, I made the mistake of posting an enquiry over on the ARRSE forum on the same subject. Don't think the moderators over there are doing their job. Makes me glad of HMVF Thanks R I know what you mean. Quote Link to comment Share on other sites More sharing options...
Sean N Posted December 21, 2014 Share Posted December 21, 2014 I have vague recollections from back when working for military, that although BCF was banned, there are/were exemptions due to it being safer to use in enclosed area, ie inside an AFV. I think the Halon type of extinguisher superseded BCF for general MT exterior use, but then that was banned under the Montreal Protocol. Might not have this totally correct, but some things get forgotten over time if of no great importance! (sent to brain's recycle bin!) Hi Richard, BCF is Halon 1211 / 1301, same stuff; it was banned under the Montreal Protocol except for essential users, which is how the MoD kept using it. There's nothing like it for effectiveness for such a small volume of extinguishant, but the MoD are trying to phase it out gradually, but the end date is between 2020 and 2040! Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted December 21, 2014 Share Posted December 21, 2014 Hi Richard, BCF is Halon 1211 / 1301, same stuff; it was banned under the Montreal Protocol except for essential users, which is how the MoD kept using it. There's nothing like it for effectiveness for such a small volume of extinguishant, but the MoD are trying to phase it out gradually, but the end date is between 2020 and 2040! Hi Sean, I seem to recollect another extinguisher being fitted in early 90's to replace the old green BCF and it being refered to as Halon, but one of those things you don't take too much notice of, except how to use it in an emergency. Quote Link to comment Share on other sites More sharing options...
Lauren Child Posted December 21, 2014 Share Posted December 21, 2014 There are several types of Halon. BCF is a UK name for bromochlorodifluoromethane which is Halon 1211. Quote Link to comment Share on other sites More sharing options...
Sean N Posted December 22, 2014 Share Posted December 22, 2014 Hi Sean,I seem to recollect another extinguisher being fitted in early 90's to replace the old green BCF and it being refered to as Halon, but one of those things you don't take too much notice of, except how to use it in an emergency. I seem to recall there are extensive papers available online about all the minute variations, nomenclature, policy for phasing out, etc., if one is interested enough to read them. Personally I'm not! Quote Link to comment Share on other sites More sharing options...
robin craig Posted December 22, 2014 Author Share Posted December 22, 2014 The major reason for making the effort to find out about this bracket is to be accurate with what is put on a vehicle. For myself and many others the idea of putting an item that was issued say in year 2000 on a vehicle that was actually withdrawn from service in 1990 is a clash. Being historically accurate is important to some people, it for sure isn't everyone's cup of tea but then I think that is what life is all about. R Quote Link to comment Share on other sites More sharing options...
wally dugan Posted December 22, 2014 Share Posted December 22, 2014 the removal of the green BCF extinguishers from B vehicle was to be completed by December 2003 prior to this date a new style of bracket was issued the one with the red tab it had been found that cases of discharged extinguisher had been found on vehicles and had not been replaced with serviceable ones the red plastic tab breaks when the extinguisher is removed from the bracket the extinguisher can be checked in place by put your finger through the hole in the base of the bracket to check the dimple as to getting the red plastic break tabs if you like l can ask the workshops if they have any l can have REGARDS WALLY Quote Link to comment Share on other sites More sharing options...
robin craig Posted December 22, 2014 Author Share Posted December 22, 2014 Dear Wally, thanks for your reply. Currently we don't need any of the red bits but would like to find a supplier just in case.We think we have a supply of the same material here but not quite certain. Appreciate your commenting. R Quote Link to comment Share on other sites More sharing options...
andym Posted December 22, 2014 Share Posted December 22, 2014 The major reason for making the effort to find out about this bracket is to be accurate with what is put on a vehicle. For myself and many others the idea of putting an item that was issued say in year 2000 on a vehicle that was actually withdrawn from service in 1990 is a clash. Being historically accurate is important to some people, it for sure isn't everyone's cup of tea but then I think that is what life is all about. R As a demonstration of an alternative point of view, I'd agree with being historically accurate except where safety trumps accuracy. I'd personally rather have a later extinguisher that works than an older one that doesn't. I'm not saying that anyone is right or wrong, each to his own! Andy Quote Link to comment Share on other sites More sharing options...
Rover8FFR Posted December 23, 2014 Share Posted December 23, 2014 Would it not be sensible to have the correct but empty extinguisher and bracket in the vehicle. With a modern gauged extinguisher that is CE marked and to a current standard as a loose item with the parts and tools you carry etc. I think from a safety perspective I would not use either an old Pyrene BCF type extinguisher full stop as they contain asbestos! Just my four peneth as this is my approach only but seems the safest (To Me ) Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted December 23, 2014 Share Posted December 23, 2014 I think from a safety perspective I would not use either an old Pyrene BCF type extinguisher full stop as they contain asbestos! Relating to Pyrene, that would be CTC I think, not BCF. Not sure where the asbestos comes in though ............ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.