neil0841 Posted May 7, 2022 Share Posted May 7, 2022 Looking to buy up to four land rover folding chairs in reasonable to excellent condition - chairs as shown in image.. Quote Link to comment Share on other sites More sharing options...
ferretfixer Posted May 9, 2022 Share Posted May 9, 2022 I would try Anchor Supplies. Or GI Joes Army Surplus Store. I have noticed how the price of these has increased dramatically over the last few years though!.... Quote Link to comment Share on other sites More sharing options...
john1950 Posted May 9, 2022 Share Posted May 9, 2022 If you cannot find any I will have a look in the dark box. Quote Link to comment Share on other sites More sharing options...
64EK26 Posted May 9, 2022 Share Posted May 9, 2022 Hi A friend of mine will have quite a few for sale at the Solent Overlord Show which is well worth visiting Cheers Richard Quote Link to comment Share on other sites More sharing options...
neil0841 Posted May 10, 2022 Author Share Posted May 10, 2022 Many thanks for the responses.. Anchor and GI Joe's are sold out as are all the surplus shops I have looked at online.. john1950 - would be keen to hear from you if you have some to sell. 64EK26 - thanks for the heads up - I may go down to take a look then.. Quote Link to comment Share on other sites More sharing options...
john1950 Posted May 10, 2022 Share Posted May 10, 2022 Hi I have 3 plus some parts I will get some pictures. Quote Link to comment Share on other sites More sharing options...
neil0841 Posted May 10, 2022 Author Share Posted May 10, 2022 john1950 - happy to have a chat with you about these.. Quote Link to comment Share on other sites More sharing options...
mad dan eccles Posted December 31, 2023 Share Posted December 31, 2023 Does anyone by perchance happen to know what size nut, bolt and washers are used for the bar that runs from the front legs to the back leg joint are. I've recently picked one up and it's missing them off one side. Quote Link to comment Share on other sites More sharing options...
fv1609 Posted January 1 Share Posted January 1 1/4 UNF 1 Quote Link to comment Share on other sites More sharing options...
fv1609 Posted January 1 Share Posted January 1 Make sure you get a domed head. On manufacture of the chair the heads are outermost which means that the nut & thread rub against the canvas base but this causes a hole to develop. I have reversed my bolts so that the dome doesn't do this. Quote Link to comment Share on other sites More sharing options...
mad dan eccles Posted January 1 Share Posted January 1 Will do. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.