Hutch3674 Posted December 19, 2016 Share Posted December 19, 2016 (edited) Good day again Gents, having spent the last few days deep in thought about what I will be doing to my Millitant on my return in the New year, after looking at my Job / Questions list, I have come up with 3 questions to quiz my fellow Militant owners with :- 1. Tyre pressures all round 60 PSI? (Advised by two Milly owners) 2. Do the brake drums come straight off after the wheel has been removed, or do they require a puller type tool or some mild persuasion? 3. On my two rear axles around the (4) brake drums, there are rings, I thought these rings were like scraper rings to keep mud to a minimum, The MOT inspector thought that they should be welded up, I can see from photos on 0-5-2 thread that they are welded at various points around the drum. Do they serve any purpose and should I follow the same pattern prior to my next MOT? Once again Gents, many thanks in advance Hutch Edited December 19, 2016 by Hutch3674 Quote Link to comment Share on other sites More sharing options...
john1950 Posted December 19, 2016 Share Posted December 19, 2016 When I used to put metal rings around the brake drums, Years ago. It was to stop brake squeal, Interrupt the surface vibration of the drum. They were usually secured with a crimp bolt. Quote Link to comment Share on other sites More sharing options...
Sean N Posted December 19, 2016 Share Posted December 19, 2016 Good day again Gents, having spent the last few days deep in thought about what I will be doing to my Millitant on my return in the New year, after looking at my Job / Questions list, I have come up with 3 questions to quiz my fellow Militant owners with :- 1. Tyre pressures all round 60 PSI? (Advised by two Milly owners) 2. Do the brake drums come straight off after the wheel has been removed, or do they require a puller type tool or some mild persuasion? 3. On my two rear axles around the (4) brake drums, there are rings, I thought these rings were like scraper rings to keep mud to a minimum, The MOT inspector thought that they should be welded up, I can see from photos on 0-5-2 thread that they are welded at various points around the drum. Do they serve any purpose and should I follow the same pattern prior to my next MOT? Once again Gents, many thanks in advance Hutch Do you mean these: ? In an earlier image, it's noticeable at least one isn't so well attached: Quote Link to comment Share on other sites More sharing options...
john1950 Posted December 19, 2016 Share Posted December 19, 2016 Very similar the ones I used, they were like a large dynamo clamp. If yours are a cast ring they will be an easy tack otherwise you will need an mixed metal rod. A quick fix. Quote Link to comment Share on other sites More sharing options...
Hutch3674 Posted December 19, 2016 Author Share Posted December 19, 2016 Yep That's them, The last photo of the rear right wheel station is pretty much the condition of all my brake drums. I will get them welded up before April, and that will be the end of this issue. Cheers & thanks again. Hutch Do you mean these: ? In an earlier image, it's noticeable at least one isn't so well attached: Quote Link to comment Share on other sites More sharing options...
Zero-Five-Two Posted December 19, 2016 Share Posted December 19, 2016 Bands are indeed anti squeal measures and should be welded on. The ones on my Milly (which I hasten to add are now somewhat more secure than they were originally) are actually tubes which are full of what appears to be sand. I found this out when I welded a hole in one of them while attaching it to the drum. Speaking of drums, they are secured to the hub by 4 studs with nuts on You can see the one of the studs in this view. When you fit the road wheel you must ensure the extra holes in the wheel line up with the drum studs otherwise it will not sit right. Once the nuts are removed the drums come off fairly easily, but there are holes for screwing jacking bolts in which will persuade the most stubborn drum to move. Bolts to use are 1/2" UNC, which while they look quite like M12 they are very different. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.