Diana and Jackie Posted November 2, 2016 Share Posted November 2, 2016 Very handy device that does work, took a load of rusty water and dirt from a tank of petrol. Fill it with water and not a drop runs through :-) ! http://www.agri-supply.co.uk/mr-funnel-f3/?gclid=CjwKEAjwnebABRCjpvr13dHL8DsSJABB-ILJVEEQUGsYCGPOZvm3qjOu6Ri3AqyGWqyUHyZggmDUyxoCdgLw_wcB Diana Quote Link to comment Share on other sites More sharing options...
Brooky Posted November 2, 2016 Share Posted November 2, 2016 Not really new I think I can remember Dad having a funnel like that back in the late 60's. Just had a very fine gauze in it Quote Link to comment Share on other sites More sharing options...
Toolman Posted November 3, 2016 Share Posted November 3, 2016 Not really new I thinkI can remember Dad having a funnel like that back in the late 60's. Just had a very fine gauze in it But this one removes water :-) Good link, thanks Quote Link to comment Share on other sites More sharing options...
Tony B Posted November 3, 2016 Share Posted November 3, 2016 That's what the old fine gauze funnels did. Quote Link to comment Share on other sites More sharing options...
snowtracdave Posted November 3, 2016 Share Posted November 3, 2016 Bought one of these at our local agricultural dealers annual show four or more years ago . I think they said , at the time , that they were developed for the aviation world . Quote Link to comment Share on other sites More sharing options...
Brooky Posted November 3, 2016 Share Posted November 3, 2016 Not really new I thinkI can remember Dad having a funnel like that back in the late 60's. Just had a very fine gauze in it This one removed water. The gauze was so fine it would let fuel through but not water Quote Link to comment Share on other sites More sharing options...
gas 44 Posted November 4, 2016 Share Posted November 4, 2016 These type of funnels have been around for years, I remember using one early 70's delivering parrafin. Normally only needed when fuel has been stored for a long period of time or incorrectly. Still a very usefull piece of kit and thanks for the link. Quote Link to comment Share on other sites More sharing options...
ruxy Posted November 4, 2016 Share Posted November 4, 2016 This one removed water. The gauze was so fine it would let fuel through but not water My understanding is that the finest gauge gauze will not pass water within kero, DERV, petrol BUT only reliable for a bulk passage that you accept will still contain some small trace of water , after that you need a sedimenter then a final finishing filter prior to a carb or fuel pump. Obviously WW2 era. carb(s) and inject pumps are more tolerant of a bit of water content remaining. Aux. engines for ships built in the 1950's (such as WW2 era. Rustons) - the final finishing tended to be done with a Alfa-Lavel centrifuge , plenty of water was removed along with magnetic swarf (wtf did it all originate on a 16 year old bilge & settling tank) & other sludge on the plates Quote Link to comment Share on other sites More sharing options...
Tony B Posted November 4, 2016 Share Posted November 4, 2016 Back int day, before winterised disiel these gizmos were essential, that and bury two cans of fuel in the muck heap overnight so you had warm disiel to pour into the tank on a frosty morning. :-D Quote Link to comment Share on other sites More sharing options...
ruxy Posted November 5, 2016 Share Posted November 5, 2016 Gauze water separation - I understand the theory is that all water has surface tension - hence you can see water 'balled' in the base of a container of fuel. Diesel contains wax and this gives a better (stronger) surface tension at the interface of the fluids. If the gauze is sufficiently fine then the surface tension can't burst and thus the gauze holds back the water like a dam, I suppose the lower the head of fuel against the gauze - the better it works. Quote Link to comment Share on other sites More sharing options...
Brooky Posted November 5, 2016 Share Posted November 5, 2016 Gauze water separation - I understand the theory is that all water has surface tension - hence you can see water 'balled' in the base of a container of fuel. Diesel contains wax and this gives a better (stronger) surface tension at the interface of the fluids. If the gauze is sufficiently fine then the surface tension can't burst and thus the gauze holds back the water like a dam, I suppose the lower the head of fuel against the gauze - the better it works. Thats how I understood it worked Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.