fayjo56 Posted January 3, 2013 Share Posted January 3, 2013 All these MW pics, I love this forum!:-D Quote Link to comment Share on other sites More sharing options...
monty2 Posted January 6, 2013 Share Posted January 6, 2013 The top one rim of the two is the right one Peter http://www.milmarket.org Quote Link to comment Share on other sites More sharing options...
hans prijs Posted January 6, 2013 Author Share Posted January 6, 2013 hello monty2 oke thanks can you tel me what vehicle is the other rim made regards hans Quote Link to comment Share on other sites More sharing options...
billyvan Posted January 9, 2013 Share Posted January 9, 2013 I'm very Jealous. I have also recently acquired an MW Project, but mine has a lot more work required than yours. I will follow your progress with interest. Alex Quote Link to comment Share on other sites More sharing options...
hans prijs Posted February 12, 2013 Author Share Posted February 12, 2013 checked my gearbox new compressor mounted and primed Quote Link to comment Share on other sites More sharing options...
Louis Posted February 15, 2013 Share Posted February 15, 2013 Hi Hans, It is nice to see another Bedford in The Netherlands...... She is a good find to restore. To be honust i am a wee bit jelous of your rear body....your back body would look amazing om my aeroscreen Bedford MW (May 1940)..... Following your restoration project with interest. Cheers, Louis Quote Link to comment Share on other sites More sharing options...
hans prijs Posted March 3, 2013 Author Share Posted March 3, 2013 rear brakes also ready Quote Link to comment Share on other sites More sharing options...
hans prijs Posted March 3, 2013 Author Share Posted March 3, 2013 Quote Link to comment Share on other sites More sharing options...
hans prijs Posted March 3, 2013 Author Share Posted March 3, 2013 and now checking the engine and cilinderhead Quote Link to comment Share on other sites More sharing options...
Maurice Posted March 3, 2013 Share Posted March 3, 2013 and now checking the engine and cilinderhead[ATTACH=CONFIG]73467[/ATTACH] [ATTACH=CONFIG]73466[/ATTACH] just a note ,the inlet manifold is from a QL , on the MW the oil filter bracket is mounted on the side , so it sits vertically looks like your oil lines are again for MW Quote Link to comment Share on other sites More sharing options...
hans prijs Posted March 3, 2013 Author Share Posted March 3, 2013 hello maurice i now it that the oil filter for a mw verticaly mounted is i have no other manifold to change it hans Quote Link to comment Share on other sites More sharing options...
Maurice Posted March 3, 2013 Share Posted March 3, 2013 hello maurice i now it that the oil filter for a mw verticaly mounted is i have no other manifold to change it hans will have a look in my bedford parts pile , must be several manifolds there ,but don`t remember wich models. Quote Link to comment Share on other sites More sharing options...
hans prijs Posted March 27, 2013 Author Share Posted March 27, 2013 update what i have done the last weeks gearbox painted cilinderhead refurbished engineblock partly painted engine complete buildup and ready to instal im my bedford Quote Link to comment Share on other sites More sharing options...
lssah2025 Posted March 27, 2013 Share Posted March 27, 2013 Looking good Hans... Quote Link to comment Share on other sites More sharing options...
hans prijs Posted March 27, 2013 Author Share Posted March 27, 2013 thanks issah Quote Link to comment Share on other sites More sharing options...
Louis Posted March 31, 2013 Share Posted March 31, 2013 Hi Hans, Looking nice and she might be out soon for a test run i supose.. Cheers, Louis Quote Link to comment Share on other sites More sharing options...
hans prijs Posted April 3, 2013 Author Share Posted April 3, 2013 engine almost on her place a picture of the side off the engine yes it fits like a glove and the radiator fits Quote Link to comment Share on other sites More sharing options...
hans prijs Posted April 11, 2013 Author Share Posted April 11, 2013 Yes the engine is running smootly and now is leaking my waterpump searching for a new one Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted April 11, 2013 Share Posted April 11, 2013 Yes the engine is running smootly and now is leaking my waterpump searching for a new one Hans, you can rebuild the water pumps, parts normally available from Norman at Bygone Bedford Bits in England. Quote Link to comment Share on other sites More sharing options...
Louis Posted April 11, 2013 Share Posted April 11, 2013 Hi Hans, And he even have compleat rebuild oneces. But he would love that you send your old one to him for excheance projects. Cheers, Louis Quote Link to comment Share on other sites More sharing options...
hans prijs Posted April 12, 2013 Author Share Posted April 12, 2013 i found a nos waterpump in the netherlands pickt it up today next job is put it on the engine and testing Quote Link to comment Share on other sites More sharing options...
rampant rivet Posted April 12, 2013 Share Posted April 12, 2013 Hello Hans, Your horn in in the wrong place, it should be on the chassis. behind the steering box, nice and easy to get to while the front is off. regards rippo this is probably where John means the horn should be, great job on the engine by the way Quote Link to comment Share on other sites More sharing options...
hans prijs Posted April 12, 2013 Author Share Posted April 12, 2013 i take a look next week if there is a bracket then i put the horn there thanks a lot Quote Link to comment Share on other sites More sharing options...
Louis Posted April 14, 2013 Share Posted April 14, 2013 (edited) [ATTACH=CONFIG]75230[/ATTACH] this is probably where John means the horn should be, great job on the engine by the way Hi, It seems to be that we have found another differeance between '39 en '40 model MW's. My horn is the same way mounted as John's. And i do spot differend shock absorbers to on the front axle......:nut: Cheers, Louis Edited April 14, 2013 by Louis Quote Link to comment Share on other sites More sharing options...
hans prijs Posted April 15, 2013 Author Share Posted April 15, 2013 yes the engine is running smootly whitout a drop of water out om the new waterpump yes there are 2 holes in the chassis for the bracket of the horn in the back of the steeringbox Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.