xtreme Posted July 5, 2010 Share Posted July 5, 2010 When I first got my cvrt striker There were no bolts in the LID "engine,drivers compartment top" tried a few different bolts that look the right size but all seem tight . not wanting to cross any threads does anyone know the exact size and thread of bolt used. thanks Dan Quote Link to comment Share on other sites More sharing options...
sirhc Posted July 5, 2010 Share Posted July 5, 2010 They are UNC. I'll look up the sizes in the parts book later. Quote Link to comment Share on other sites More sharing options...
timbo Posted July 5, 2010 Share Posted July 5, 2010 Apparently one trick in service was to chop the heads off the bolts and glue them in place on the decking, only leaving four actual bolts, one on each corner. Made it easier when you had the inevitable breakdown. Don't know how true this is, but I'm sure someone will comment.... Sorry Dan can't help with bolt sizes although have the illustrated parts list at home so will look tonight if Chris can't find... Cheers Quote Link to comment Share on other sites More sharing options...
sirhc Posted July 5, 2010 Share Posted July 5, 2010 You need 1/2" UNC by 1 1/2" long. There should be 16 of them. Quote Link to comment Share on other sites More sharing options...
xtreme Posted July 5, 2010 Author Share Posted July 5, 2010 You need 1/2" UNC by 1 1/2" long. There should be 16 of them. Thanks Much appreciated . Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.