Not too bad... :shake:
I decided to adopt a 'low tech' approach as its probably what they did back then
Painted white first (just hood, bumper, wings, lights running boards rear body)
Then started out with a 7 1/2 inch cardboard square & a pencil!
Took the front edge of the bonnet as a 'true' then worked backwards to the screen, then out to the sides. A bit fiddly going down the sides of the hood as they can't be true squares as they go wonky over the radius of the curve so I made a hinge seam a horizontal line & worked to that. The back of the body was relatively straightforward (apart from the reflector recesses) as its mostly flat. But all done by hand so snow blindness and RSI were the order of the day :nut: