retalator Posted August 1, 2017 Share Posted August 1, 2017 Hi everybody just took delivery of this bedford QLT. I am going to restore it back to its former glory. Was hopeing someone might be able help me out with a fee questions? i have a copy of the key card which informs me its from the contract V4914 with a war department number of L559757. As you can see it has a different WD on the doors L4819720 can anyone shed some light on this? Will need some new tyres anyone know where i can get some? 1 Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted August 1, 2017 Share Posted August 1, 2017 Hi, from a fellow QL owner. the census number on the door comes from a batch of numbers allocated for issue in the Middle East to a variety of vehicles. I would suggest this was a previous owner's work as it has obviously been in preservation at some point in it life, by the fact that the allied star is on it. Quote Link to comment Share on other sites More sharing options...
retalator Posted August 1, 2017 Author Share Posted August 1, 2017 Thanks you for that information Richard, where did you find out that information. As i want to try and find out as much information about the life of this vehicle. I started the restoration today by taking all the rubbish out the back. which leads me onto my next question. I found a wooden box in the back, does anyone know if this box was for the bren gunner at the front of the body to stand on, and if so is this one the original box or what some one else has made year after its army life? Quote Link to comment Share on other sites More sharing options...
ColinR Posted August 1, 2017 Share Posted August 1, 2017 whereabouts are you based? I have a QLT which is undergoing (slowly) major maintenance to get her back on the road then a resto in the future. Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted August 1, 2017 Share Posted August 1, 2017 Thanks you for that information Richard, where did you find out that information. As i want to try and find out as much information about the life of this vehicle. Hi, To answer your question above, the census number information comes from a copy of the official B Vehicle census list, showing groups of numbers allocated to particular contracts for vehicles. Also having owned my QL for 30 years and studied and worked on British military vehicles for nearly 50 years, I have gathered information and knowledge along the way. My guess is this vehicle was in a collectors hands at one time and for some reason or another it has been out of use and been neglected. I am sure you will put it back into full working order again. regards, Richard Quote Link to comment Share on other sites More sharing options...
retalator Posted August 1, 2017 Author Share Posted August 1, 2017 whereabouts are you based? I have a QLT which is undergoing (slowly) major maintenance to get her back on the road then a resto in the future. Based in the east midlands, Just out side Leicester Quote Link to comment Share on other sites More sharing options...
Hendrik van Oorspronk Posted August 1, 2017 Share Posted August 1, 2017 And a tip if you are going to work on the carburetor, use the gasketset with membranes from the 35 PAAI carburetor of the Citroen TractionAvant, they are easy to get and fit. Just did mine today. Groeten uit Holland Hendrik Quote Link to comment Share on other sites More sharing options...
scott9643 Posted August 2, 2017 Share Posted August 2, 2017 Hi everybody just took delivery of this bedford QLT. I am going to restore it back to its former glory. Was hoping someone might be able help me out with a few questions? I thought I recognised this truck, have a look at this thread -- http://hmvf.co.uk/forumvb/showthread.php?13244-Bedford-QL-Trooper You'll see that nothing much has changed in the last few years. When I first saw this truck, it was sat in Kings yard at Bishops Lydeard near Taunton. I believe Kings bought it from an Army disposal sale, probably Ruddington and had used it to ferry workers to their various jobs. Kings were a very old firm of road contractors and when they folded the contents of the yard were auctioned off. The sale included a number of steam rollers and steam lorries as well as 40s and 50s lorries all in an abandoned state. This QL was sat beside two ERF tippers and was in remarkably good condition other than the rear diff was missing, you could tell because the rear axle was split in half. The body was complete with all the seats -- and in answer to your question about the box -- yes it is original and was fitted to the floor at the front. A farmer from Crowcombe bought the truck, they bolted the axle back together without the diff and drove it home on the front axle and this is how it remained for many years as the truck was in regular use around the farm. Quote Link to comment Share on other sites More sharing options...
scott9643 Posted August 2, 2017 Share Posted August 2, 2017 These pictures were taken in 2006, I've got some taken earlier, but I'll have to look them out Quote Link to comment Share on other sites More sharing options...
retalator Posted August 2, 2017 Author Share Posted August 2, 2017 And a tip if you are going to work on the carburetor, use the gasketset with membranes from the 35 PAAI carburetor of the Citroen TractionAvant, they are easy to get and fit. Just did mine today.:) Groeten uit Holland Hendrik Thanks for that advice on the carburetor. I will deafently do that when i look at it. Emerson Quote Link to comment Share on other sites More sharing options...
retalator Posted August 2, 2017 Author Share Posted August 2, 2017 These pictures were taken in 2006, I've got some taken earlier, but I'll have to look them out Thanks for the extra information on the history of the vehicle that fits in with what i was told when i got the vehicle. Not much has changed since these photos. Has i lot more rust. Quote Link to comment Share on other sites More sharing options...
retalator Posted August 2, 2017 Author Share Posted August 2, 2017 I have started to dismantle the vehicle to day. I have taken the drivers door of which has ruted away. Can anyone post some pictures of how the bottom edge should be. Quote Link to comment Share on other sites More sharing options...
Ian L Posted August 2, 2017 Share Posted August 2, 2017 Hi everybody just took delivery of this bedford QLT. I am going to restore it back to its former glory. Was hopeing someone might be able help me out with a fee questions? i have a copy of the key card which informs me its from the contract V4914 with a war department number of L559757. As you can see it has a different WD on the doors L4819720 can anyone shed some light on this? Will need some new tyres anyone know where i can get some? Brave Brave man :bow: I looked at that QLT in 2011 & walked away from it, from what I remember its a lot lot worse condition than the photos show ? he wanted £1200 for it then. Bought a QLD soon after that needed restoring & then an Austin K5 Quote Link to comment Share on other sites More sharing options...
Ian L Posted August 2, 2017 Share Posted August 2, 2017 I have started to dismantle the vehicle to day. I have taken the drivers door of which has ruted away. Can anyone post some pictures of how the bottom edge should be. Might be able to help you with mechanical spares & some body panels such as doors ? I have a few bits. Quote Link to comment Share on other sites More sharing options...
retalator Posted August 2, 2017 Author Share Posted August 2, 2017 If you can pm me what you have, then i can have a look what i need. Emerson Quote Link to comment Share on other sites More sharing options...
ColinR Posted October 19, 2017 Share Posted October 19, 2017 Any further news on the restoration? Quote Link to comment Share on other sites More sharing options...
retalator Posted November 2, 2017 Author Share Posted November 2, 2017 Sorry for the delay. Like most things I have to work to pay the bill so not done to much. I have took the cab body and engine out. Did this the slow way so I could label things up and take photos as I went. Quote Link to comment Share on other sites More sharing options...
retalator Posted November 2, 2017 Author Share Posted November 2, 2017 Want to start collecting the small bits and pieces I think are missing like window winder handles, wipers, etc. Also want to start sending some of the small parts away for refurbishment like the wiper motors, and dials in the dash board also the light switch's. Does anyone know who can refurbish this? or is it possible to do thee parts your self? Quote Link to comment Share on other sites More sharing options...
retalator Posted November 2, 2017 Author Share Posted November 2, 2017 Going to send the chassis away for sand blasting in a few weeks time once the last parts are removed. Then will make a start on the rust cab Quote Link to comment Share on other sites More sharing options...
guy66 Posted November 3, 2017 Share Posted November 3, 2017 Still have a Bedford combination clock (Amp and oil pressure) spare. Quote Link to comment Share on other sites More sharing options...
Baz48 Posted November 3, 2017 Share Posted November 3, 2017 What switches are you looking to refurb, I have just reworked a QL instrument panel for a friend and found providing you disassemble them carefully and keep a photo diary and notes of what you are doing be patient you'll do it. I think this one is a little further along than yours 1 Quote Link to comment Share on other sites More sharing options...
retalator Posted July 21, 2018 Author Share Posted July 21, 2018 Its took a bit longer than i was hoping. I decided to strip the whole chassis down. Taking the leaf springs off took some doing. Only one pin left now to remove from the last shackle and its the done. 2 Quote Link to comment Share on other sites More sharing options...
Ex-boy Posted July 22, 2018 Share Posted July 22, 2018 That really is a labour of love. It's what I would have liked to do but never had the cash or space for. Now too old old to contemplate it, so good luck and I'll be cheering you on from the sidelines. Steve. Quote Link to comment Share on other sites More sharing options...
retalator Posted January 19, 2019 Author Share Posted January 19, 2019 When i started I thought I would have all the time in the world to restore my Bedford. How wrong i was. i decided to clean all the parts, shot blast and wire brush everything down myself. 1 Quote Link to comment Share on other sites More sharing options...
retalator Posted January 19, 2019 Author Share Posted January 19, 2019 This has taken alot of hours so far and more to go. I think next time i will have someone else shot blast it all down in one go. i have been debating with myself what colour to repaint the vehicle. I have found what looks like s.c.c no 15 olive drab on the chassis. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.