lssah2025 Posted October 31, 2015 Author Share Posted October 31, 2015 Very nice Luigi, I like the new bin for the Thompson SMG parts kit that you made and the straps for the vickers/bren drums.. I need to do that to mine, I have a couple of them done, but need to do the rest. Quote Link to comment Share on other sites More sharing options...
Catch 22 LBDR Posted November 2, 2015 Share Posted November 2, 2015 Some fantastic work being done hear, keep it up. Quote Link to comment Share on other sites More sharing options...
pauletto Posted November 21, 2015 Share Posted November 21, 2015 I need help, I redid the bracket wireless set, the originals were too damaged, I have only this stuff, someone has a photo, to know what is missing, I think that on the right side there was a junction box, he had somewhere protected rubber Quote Link to comment Share on other sites More sharing options...
pauletto Posted November 28, 2015 Share Posted November 28, 2015 I have to restore or find a better one the steering wheel someone can indicate a serious company that can do it, I have found this Wood Car Restoration but I have not been able to get in touch, Thanks My steering wheel is reduced Quote Link to comment Share on other sites More sharing options...
pauletto Posted December 10, 2015 Share Posted December 10, 2015 I am very glad they invented the CNC lathe, so I could do these Bolts, round head countersunk slotted Quote Link to comment Share on other sites More sharing options...
RMS Posted December 10, 2015 Share Posted December 10, 2015 I need the same fasteners for my Morris LRC, i have been picking them up from eBay over the last couple of year, managed to get about 300 of various lengths so far :-) , only need about another 200!:nut: Quote Link to comment Share on other sites More sharing options...
pauletto Posted December 10, 2015 Share Posted December 10, 2015 If you have the size you can do, I did the drawing with the dimensions of my bolts, but I have to find a new lathe, because this batch of bolts and cost me a lot:mad: Quote Link to comment Share on other sites More sharing options...
RMS Posted December 10, 2015 Share Posted December 10, 2015 I have not had any made yet, keep finding NOS items on eBay in small batches. I have looked into getting a batch made but they were nearly £2 per bolt! hopefully i can find enough before i need them for final assembly. Quote Link to comment Share on other sites More sharing options...
pauletto Posted December 10, 2015 Share Posted December 10, 2015 it has cost about 2.50 each Quote Link to comment Share on other sites More sharing options...
rewdco Posted December 10, 2015 Share Posted December 10, 2015 I am very glad they invented the CNC lathe, so I could do these Bolts, round head countersunk slotted [ATTACH=CONFIG]110758[/ATTACH][ATTACH=CONFIG]110759[/ATTACH][ATTACH=CONFIG]110760[/ATTACH] Very nice job! But did you use the same thread system? Looks like BSF versus UNF to me... Jan Quote Link to comment Share on other sites More sharing options...
pauletto Posted December 10, 2015 Share Posted December 10, 2015 I chose to UNF, here in Italy I can not find the nuts with the original thread Here everything that is English is a big problem Quote Link to comment Share on other sites More sharing options...
the_shadock Posted July 22, 2016 Share Posted July 22, 2016 Pauletto, any news of your Humber restoration? thanks Pierre-Olivier Quote Link to comment Share on other sites More sharing options...
pauletto Posted July 22, 2016 Share Posted July 22, 2016 Quiet Pierre, for now the Hummer is parked, I have the GM Fox, all dismantled and it is time to put everything in place, in September, I will start again with the humber Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.