JoelH Posted September 10, 2010 Share Posted September 10, 2010 Hello, We are currently converting some clansman "staff user" boxes. We have removed the old wires but we are in need of the circular crimp connectors used on the clansman kit. Any suggestions on alternatives? They fit over the pin connections (mark O, W & B) on the bellow circuit board: Example item on auction site. Cheers, FB Quote Link to comment Share on other sites More sharing options...
Stone Posted September 11, 2010 Share Posted September 11, 2010 Looks like a fairly standard circular 'bullet' crimp - if it was me I'd just grab some standard ones and either nip them in with pliers or expand them slightly to fit the terminals. A decent car parts shop should have a good selection, if not I'd try Farnell/CPC, RS and Maplin in that order. Worth pointing out that you should definitely invest in a decent crimp tool (spend £20-30 on a proper parallel-jaws model, don't just get a single-hinge one for a fiver) with appropriate size jaws for the connectors you choose. Stranded wire crimped correctly with the right tool gives the best connection (don't add solder, it weakens it!) - if not then a correctly soldered stranded or solid wire is acceptable for slightly less mechanical strength. Don't be tempted to use pliers or a bench vice, it's just a recipe for frustration, mangled fingers and future dodgy electrical connections that are a pig to track down later. Hope that helps :angel: Stone Quote Link to comment Share on other sites More sharing options...
Tony B Posted September 11, 2010 Share Posted September 11, 2010 I throughly agree about the crimper tool. Get a good one with a built in ratchet. Not cheap mine cost £25 but works all the time every time and gives good solid connections so well worth it the long run. Quote Link to comment Share on other sites More sharing options...
steveo578 Posted September 12, 2010 Share Posted September 12, 2010 However remember the professional £14-25 insulated connectors tool does not work on the bare connectors and visa -versa -for people who don't need both tools professionally the cheap multi-tools are probably a better buy -although they certainly don't do the job as well (or as brutally) as the expensive ratchet models. Quote Link to comment Share on other sites More sharing options...
Stone Posted September 13, 2010 Share Posted September 13, 2010 However remember the professional £14-25 insulated connectors tool does not work on the bare connectors and visa -versa -for people who don't need both tools professionally the cheap multi-tools are probably a better buy -although they certainly don't do the job as well (or as brutally) as the expensive ratchet models. Correct, sorry, I forget to mention it as I only ever use the insulated ones! A short piece of heatshrink for insurance is a good idea also, whether the connector is insulated or not. Stone Quote Link to comment Share on other sites More sharing options...
AlienFTM Posted September 14, 2010 Share Posted September 14, 2010 Hello, We are currently converting some clansman "staff user" boxes. We have removed the old wires but we are in need of the circular crimp connectors used on the clansman kit. Any suggestions on alternatives? Solder the ends together? It's what I used to do when I got fed up of users bringing their kit back and whingeing that the connectors kept disconnecting. Quote Link to comment Share on other sites More sharing options...
JoelH Posted September 14, 2010 Author Share Posted September 14, 2010 Hello, In the end we took the advice and modified bullet connectors. We did solder a test example - but it was time consuming. Cheers, FB Quote Link to comment Share on other sites More sharing options...
AlienFTM Posted September 15, 2010 Share Posted September 15, 2010 We did solder a test example - but it was time consuming. And much warmer and less hard work sat out of sight and out of mind in the SHQ Troop cage than lifting and replacing CVR(T) deck armour outside in the German winter and not feeling the loss of your fingers if you slipped. ;o) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.