Jerry Jeep Posted November 10 Share Posted November 10 started work today on my next new prodget that i picket up 2 weeks ago a lot of work i have most of the bits however both axles are off a cj3b and wheels off i dont know will keep you up to date as the job moves along all the best jerry 2 Quote Link to comment Share on other sites More sharing options...
Rangie Posted November 13 Share Posted November 13 This site is a continuous source of surprise and information! A Nuffield Jeep, a bob-tailed lightweight Jeep, never heard of one before! Will be interesting to follow this refurb. Were they mass produced, or a limited-numbers type thing? Alec. Quote Link to comment Share on other sites More sharing options...
wally dugan Posted November 13 Share Posted November 13 as far a most people think only one was made and never went in to production this is a replica 1 Quote Link to comment Share on other sites More sharing options...
Jerry Jeep Posted November 18 Author Share Posted November 18 Spent today working on the nuffield got the body off along with the axles and found the jeep has been made longer by 6" back to an 80" wheel base so cut out the a fending bit to put it back to 74" will have to do the same to the body later Quote Link to comment Share on other sites More sharing options...
Citroman Posted November 18 Share Posted November 18 Great welding job...😁 1 Quote Link to comment Share on other sites More sharing options...
Jerry Jeep Posted November 18 Author Share Posted November 18 (edited) its not my welding you will not see it when I am done just like the others I have Edited November 18 by Jerry Jeep miss spelling 1 Quote Link to comment Share on other sites More sharing options...
rog8811 Posted November 19 Share Posted November 19 I don't think Citroman was suggesting you had anything to do with that welding.......but my god that was a terrible way to stick metal together, the welder I used to work with would say of it "wouldn't hold small coal". An interesting project! Quote Link to comment Share on other sites More sharing options...
Citroman Posted November 19 Share Posted November 19 (edited) No i wasn't suggesting you did it. You will have your work cut out putting that right. Edited November 19 by Citroman Quote Link to comment Share on other sites More sharing options...
steviem Posted Friday at 08:20 AM Share Posted Friday at 08:20 AM I can assure you Jerrys work is top drawer, this rare jeep is in good hands Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.