LarryH57 Posted June 6, 2017 Posted June 6, 2017 I found this old photo of these British Trucks in Italy and no doubt Tony Gosling and others can say what make they are and possibly the unit that used them. The second photo shows a horse ambulance possibly photographed in France or Belgium in WW1. What is strange about it is that the rear body swivels and the men can be seen pushing it round towards the ramp. But why bother with such an arrangement when access just from the rear would have been good enough? I look forward to your comments. Quote
Richard Farrant Posted June 6, 2017 Posted June 6, 2017 Regarding the second photo, probably got the horsebox body on a turntable so the horses could be loaded forwards unloaded forwards. Not seen that before, but this would have been the advent of horse transport. The wheels on the lorry look like Thornycroft, but that is only my guess. Quote
Runflat Posted June 7, 2017 Posted June 7, 2017 The first is a pair of FWDs. The second, is indeed a Thornycroft. It has a body by Dennis Brothers of Silchester Street, Notting Hill, London, who were known for making horse ambulances. The patent can be found here: https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=0&ND=3&adjacent=true&locale=en_EP&FT=D&date=19171029&CC=GB&NR=110782A&KC=A# I've some more photos of this contraption, which I'll post later (unless someone beats me to it). Quote
Citroman Posted June 7, 2017 Posted June 7, 2017 It seems that the trucks are commandeered and are being painted over... One horse is numbered...:cool2: Quote
Tomo.T Posted June 7, 2017 Posted June 7, 2017 It seems that the trucks are commandeered and are being painted over...One horse is numbered...:cool2: Wheel is being cleaned not painted. Vehicles are in different colours though. Quote
LarryH57 Posted June 7, 2017 Author Posted June 7, 2017 (edited) It's an interesting idea Richard that the horses might have preferred looking out and facing the direction of travel, but then the tilt would be open at the front so would submit the horses to a cold breeze, as the truck raced along at 25 mph which might not be good for the horse's health! And if the horse didn't care which way it faced with the tilt pulled down on all sides, why bother with the swivel? Another possibility is that loading or unloading from the side might be useful if these trucks were unloading horses from a train, and rather than back up the truck to each carriage they could simply drive in as a column and park beside the door with enough space to turn the rear to face the train, and be at the approximate height of the carriage floor. Edited June 7, 2017 by LarryH57 Quote
Runflat Posted June 7, 2017 Posted June 7, 2017 Yes, the patent makes clear that, "the ambulance may in some cases be drawn up alongside a platform and the body be turned into a transverse position for unloading." Anyway, some more pictures from a contemporary magazine: As can be seen, when travelling the horses would be sheltered from the headwind by the forage compartment. Quote
Runflat Posted June 7, 2017 Posted June 7, 2017 Another: And here: http://www.iwm.org.uk/collections/item/object/205244793 http://www.iwm.org.uk/collections/item/object/205244792 Quote
nz2 Posted June 7, 2017 Posted June 7, 2017 Now that's a different style of body to construct on a truck. As I don't have any horses it's use would be very limited. Another aspect of this is the turntable arrangement. I have a Thornycroft chassis ( 1913-14) with raised chassis cross members over the back axle. These are some 3-4 inches higher than the chassis rail made of heavy pipe with a flat centre section. Not to be confused with the arched cross members as used on latter Thornycroft chassis. These are factory made as the castings numbers are all in sequence to other chassis parts. For what purpose the raised sections were used for has been a puzzle. It is too early for an anti aircraft gun so this horse box is a possibility. Doug Quote
LarryH57 Posted June 8, 2017 Author Posted June 8, 2017 Assuming the rotating horsebox was just mounted as you suggest on a raised section of the chassis, then this mounting would have had to be made of something strong to withstand the load forces, front to back and side to side, as the vehicle moved unless there were some form of stay arms? Quote
johnwardle Posted June 8, 2017 Posted June 8, 2017 As Richard states in the second post, the rotating body was designed so that the horses could be loaded and unloaded walking forwards, remember this is a horse Ambulance, there could have been some difficulty in getting an injured horse to walk backwards. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.