Jump to content
  • 0

Mod lights


fesm_ndt

Question

Ok this is a daft question, but I got a handful of new mod lights. How does the light fitting come out of the middle of it?

 

I didn't want to start off with a screwdriver prising it out when it might be held in by something...

 

[ATTACH=CONFIG]82246[/ATTACH]

[ATTACH=CONFIG]82247[/ATTACH]

Link to comment
Share on other sites

4 answers to this question

Recommended Posts

  • 0

right easy FIRST remove the large brass coloured by pressing the rubber dimples at the back and draw the ring over them

when you have done this slip a thin screw driver between the rubber outer and silver inner and you will find that the metal

inner sits in the outer rubber gentlely work round it will pop out

regards wally

Link to comment
Share on other sites

  • 0
right easy FIRST remove the large brass coloured by pressing the rubber dimples at the back and draw the ring over them

when you have done this slip a thin screw driver between the rubber outer and silver inner and you will find that the metal

inner sits in the outer rubber gentlely work round it will pop out

regards wally

 

cheers, 1 done, 5 to go :D

 

[ATTACH=CONFIG]82248[/ATTACH]

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...