Prickel Posted November 17, 2011 Share Posted November 17, 2011 (edited) Hello @ All, first, sorry my terrible English. My Name is Tom and i found this Forum seaching Pictures of AEC 853 Matador. Since some Weeks, i try to realise Replika 1:1 of this wonderful Wrecker. Saw some 2008 at Dorset Steam Fair, so the Idea was born. Basic Car is IFA W50 with ideal Chassis. Has 125 PS, 12 Tons maximum Weight, Differential Lock both Axels, nearly same Wheels and other Dimensions. Dashboard is from Unimog 404 with some Changes. At the Moment, a crane is on Chassis. Name is ADK70. When Replika Cab will be ready, Crane will be removed. I had Promlems with correkt Dimensions, no Measure has been found. Only with Caliper and Calculator was expekted fome some Pictures of Internet. So the Result ist not correkt in all real Dimensions. See some last Pictures here with klick at Thumbnails: I`m searching some Detail Pictures of AEC, for Example Mechanism of opening front Windows and measure of Glasses Hight. Also Radius Frontside of Roof. yours sincerely Tom Owner of other military Cars: DKW Munga with VW Turbo Diesel Engine and Unimog 404 also Diesel OM 617 most used in Forest, with offroad Camper Trailer, built with Unimog 404 original Suitcase Radio Edited November 17, 2011 by Prickel Quote Link to comment Share on other sites More sharing options...
Tony B Posted November 17, 2011 Share Posted November 17, 2011 Welcome along Tom, Quote Link to comment Share on other sites More sharing options...
diamond-t-steve Posted November 17, 2011 Share Posted November 17, 2011 Welcome to the forum Tom. I must say well done on your project so far. I (as well as I'm sure many others) am very impressed by your skills and look forward to seeing more as you progress. Regards.... Steve. Quote Link to comment Share on other sites More sharing options...
Prickel Posted November 17, 2011 Author Share Posted November 17, 2011 Thanks, most difficulty was fitting steering gearbox and pedals 18cm backwards. Cooler is at original place. Front of AEC is very short but now it is ok. Have one picture before building Cab and mooving steering box: Regards Tom Quote Link to comment Share on other sites More sharing options...
Zero-Five-Two Posted November 17, 2011 Share Posted November 17, 2011 Guten tag, and welcome aboard. Nice looking project. Quote Link to comment Share on other sites More sharing options...
Niels v Posted November 18, 2011 Share Posted November 18, 2011 hi welcome, very impressive work. but with that level of craftmanship why not restor an original Quote Link to comment Share on other sites More sharing options...
Degsy Posted November 18, 2011 Share Posted November 18, 2011 Welcome Tom. The cabs on Matadors vary because they were made by different manufacturers, some had a curve to the roof, others were flat. Have a look at the Matador thread for lots of pictures. Google AEC Matador for lots more info and history. Quote Link to comment Share on other sites More sharing options...
airportable Posted November 18, 2011 Share Posted November 18, 2011 Hi Tom, welcome to the forum. Great project. Quote Link to comment Share on other sites More sharing options...
Roof Over Britain Posted November 27, 2011 Share Posted November 27, 2011 Hi Tom, Interesting project, if you need any particular measurements or photos of a particular part let me know and I'll take measurements or pictures of my Matador for you. Cheers John Quote Link to comment Share on other sites More sharing options...
Prickel Posted November 28, 2011 Author Share Posted November 28, 2011 Dear John, I need four dimensions of the front side of the windshield. Measured in the transparent glass within the frame. I can still change the frame of the windshield. The glasses are not yet ordered. Here is a small drawing with 4 numbers. I would also ask: If the windshield is slightly tilted backwards, which angle is about? And at last, Overall width and height of the roof in the middle. So I can calculate radius. Now, I work almost every day at that. In planning: Roof will be removable. Soft top comes from Magirus Deutz Jupiter. The gear ratio close to the wheels have already changed. So it will go faster than the crane. The case behind the cab can be from MAN 630 (have one of it) with nearly original AEC outfit outside. Until then is far away... friendly greetings Tom Quote Link to comment Share on other sites More sharing options...
Roof Over Britain Posted November 29, 2011 Share Posted November 29, 2011 Hi Tom, Here are the measurements you asked for. The windscreen does slope back and the cab is also slightly narrower at the top, it tapers in from a point level with the bottom of the door windows. I have taken some photos of the windscreen, if you PM me your email address I will send them to you. cheers John Quote Link to comment Share on other sites More sharing options...
Prickel Posted November 30, 2011 Author Share Posted November 30, 2011 (edited) Hi John, thank you so much for information, E-Mail and pictures. My measure of number one is near 1840mm. So rest proportions will be almost correkt. Only windscreen i`ll make little higher, because floor plate is very high, impossible to modify. I dont want sitting inside, looking outside and see only upper frame of windscreen. Angel change to maximum 4` than it is better to adapt the little Windows, because i want make A and B same measure. Think, few weeks later, i can post pictures with a result. friendly greetings Tom Edited November 30, 2011 by Prickel Quote Link to comment Share on other sites More sharing options...
Prickel Posted February 24, 2012 Author Share Posted February 24, 2012 Well, I have some photos. The roof is finished, but the car is therefore too high, then it does not fit through the door into the garage. A few more weeks, then I may be allowd driving on the road. There is still much to do. friendly greetings Tom Quote Link to comment Share on other sites More sharing options...
Prickel Posted June 21, 2012 Author Share Posted June 21, 2012 (edited) Well, have finished Projekt. AEC Matador Replica drives very well. some fotos: http://up.picr.de/9940644nvr.jpg http://up.picr.de/10127413qb.jpg http://up.picr.de/9940647xzr.jpg http://up.picr.de/10695392bt.jpg http://up.picr.de/9640560vkl.jpg http://up.picr.de/10695294kn.jpg Box Body is from german army, truck name is MAN 630, also named "Emma" Will be a offroad camping car for travelling round the world. Now it is allowed using on road. friendly greetings Tom Edited June 21, 2012 by Prickel Quote Link to comment Share on other sites More sharing options...
Roof Over Britain Posted June 21, 2012 Share Posted June 21, 2012 Hi Tom Congratulations on the completion of your Project. One thing you can say for certain is there will not be another like it! looks like it will have an impressive off-road capability. Hope you have many miles (sorry Km) of trouble free driving. Cheers John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.