Richard Farrant Posted February 25, 2013 Share Posted February 25, 2013 Hi Paul, A superb job, it seems a shame to get it dirty now! A lot of detailed work there. Well done. regards, Richard Quote Link to comment Share on other sites More sharing options...
PScott Posted April 6, 2013 Author Share Posted April 6, 2013 Well , some small but very tricky items installed.. New convoy lights stripped and re finished and mounted front and rear.......new armoured wiring looms fitted, this was a a "bigger than Ben Hur" job! The looms run from the front storage boxes to a junction point on the hull side, they then go through the hull and to the internal junction box. The left hand side loom is in "behind" the wine rack( ammo storage) ...to access it requires alot of neck twisting and sore elbows and skinned knuckles!!! New external fire extinguisher activation cables were also installed....not quite as nasty as the wiring looms, but still not fun.... A few snaps of the "innocent" looking items.. Paul. Quote Link to comment Share on other sites More sharing options...
andym Posted April 6, 2013 Share Posted April 6, 2013 Excellent work, as usual! Andy Quote Link to comment Share on other sites More sharing options...
Niels v Posted April 6, 2013 Share Posted April 6, 2013 Perfect!!! a small question are the sidelight with singel or dual pin socket? And do you know of any places to get centurion spares in europe? Quote Link to comment Share on other sites More sharing options...
Caddy Posted April 7, 2013 Share Posted April 7, 2013 I think that Marcus Glenn might have some spares........ Quote Link to comment Share on other sites More sharing options...
PScott Posted April 7, 2013 Author Share Posted April 7, 2013 Perfect!!!a small question are the sidelight with singel or dual pin socket? And do you know of any places to get centurion spares in europe? Hi Niels.... the side lights are just "2" wires/pins... Quote Link to comment Share on other sites More sharing options...
Niels v Posted April 8, 2013 Share Posted April 8, 2013 Thank you very much guys....:tup:: Quote Link to comment Share on other sites More sharing options...
marvinthemartian Posted April 8, 2013 Share Posted April 8, 2013 Just reading through this and I think you have done a cracking job, well done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.