antarmike Posted September 27, 2010 Share Posted September 27, 2010 (edited) I have just bought a 101 FC Land-Rover. Can anyone point me to a register or the like who can date the vehicle from Chassis number or link Chassis number to Military reg number? Edited September 28, 2010 by antarmike Quote Link to comment Share on other sites More sharing options...
0 sirhc Posted September 27, 2010 Share Posted September 27, 2010 http://shop.heritage-motor-centre.co.uk/shop/heritage-certificates/heritage-certificates-10131/index.html Quote Link to comment Share on other sites More sharing options...
0 Poptopshed Posted September 27, 2010 Share Posted September 27, 2010 Its Military reg should be on the plate on the side of the engine cover. The 101 club does have a list of chassis numbers and known reg if available. You need to be a club member to access it though. Pm me the chassis number i will have a look for you. Quote Link to comment Share on other sites More sharing options...
0 Tony B Posted September 27, 2010 Share Posted September 27, 2010 If you have a 101 then membership of the 101 Club is esential. With only 2266 odd ever built, they are the ones who know. Quote Link to comment Share on other sites More sharing options...
0 antarmike Posted September 27, 2010 Author Share Posted September 27, 2010 Just joined their Forum, but not yet joined their Club. I don't yet know the Chassis number of the 101 I have just bought..... Thanks for the Tip, Mike Quote Link to comment Share on other sites More sharing options...
0 Tony B Posted September 27, 2010 Share Posted September 27, 2010 Good place Mike. The 101's have a few funnies though! If you change oil or the filter, take the bottom of the oil pump off and pack with Petroleum jelly, this re primes the pump. Has the front axle started to sound like it's about to disintegarte yet? Scared the *** out of me the first time. Quote Link to comment Share on other sites More sharing options...
0 antarmike Posted September 27, 2010 Author Share Posted September 27, 2010 Good place Mike. The 101's have a few funnies though! If you change oil or the filter, take the bottom of the oil pump off and pack with Petroleum jelly, this re primes the pump. Has the front axle started to sound like it's about to disintegarte yet? Scared the *** out of me the first time. I may be an idiot, but I have only run the engine. It was packed in among other vehicles when I saw it and agreed to buy it, so driving was not an option. Time will tell if I have bought "a Pig in a Poke" Quote Link to comment Share on other sites More sharing options...
0 ferret1958uk Posted September 27, 2010 Share Posted September 27, 2010 Many people are scared of 101's because they look so big. They are actually very easy to work on and access to the engine and gearbox is easy if the load bed is kept clear. If the chassis and other bits look good then it should be ok. You ran the engine so splits in manifolds etc have probably been ruled out. I just pray it has brakes for you. Quote Link to comment Share on other sites More sharing options...
0 antarmike Posted September 27, 2010 Author Share Posted September 27, 2010 (edited) I have been Landy-less for some years now, I have in the past had Petrol 2A 88", Diesel (2.25) 2A 88", Series 2b 1 1/2 ton F.C (110"), 80" series one. and a 127" first with 2.5Td then with 200Tdi. Never had one with the Buick lump in so that will be new.... Used to working on Solihull's best so I hope I like the 101" It has a Nokken which also I hope works. In the past I have had Aeroparts front Capstan winch, Aeroparts rear PTO Capstan winch, Land-Rovers own Hydraulic drum winch, and several Fairey 5000 mechanical drum winches so again the Nokken will be something new.... Bottom of rear cross member will need welding before too long, but as a welder that is not a problem. I don't know how near to original spec I am going to take it. It is on the wrong wheels and tyres at present, and that will get changed. It had power steering conversion. and if that works well enough it will stay, but the way it is done it will be an hours work to remove it, and get back to "Power steering by Armstrong" Edited September 27, 2010 by antarmike Quote Link to comment Share on other sites More sharing options...
0 Essex5 Posted September 27, 2010 Share Posted September 27, 2010 As Chairman of the 101 Forward Control Club & Register, (at least until the AGM!), I would like to say 'Welcome to our particular section of the Madhouse.' As someone else said, 101s are not that complicated, although they do have a few quirks of their own:nut:. I can recommend the Club Forum as a wealth of friendly help and information online, much as the HMVF is - if you fit in here, you'll fit in there as well:D. http://www.101club.org, and click on Forums. Cheers, John Quote Link to comment Share on other sites More sharing options...
0 antarmike Posted September 27, 2010 Author Share Posted September 27, 2010 As Chairman of the 101 Forward Control Club & Register, (at least until the AGM!), I would like to say 'Welcome to our particular section of the Madhouse.' As someone else said, 101s are not that complicated, although they do have a few quirks of their own:nut:. I can recommend the Club Forum as a wealth of friendly help and information online, much as the HMVF is - if you fit in here, you'll fit in there as well:D. http://www.101club.org, and click on Forums. Cheers, John Yes seem like a good crowd. I will put an intro onto that board soon. Cheers Quote Link to comment Share on other sites More sharing options...
0 Tony B Posted September 28, 2010 Share Posted September 28, 2010 Ferret, try doing anything on the Ambulance version! :iamsmiling: Quote Link to comment Share on other sites More sharing options...
0 radiomike7 Posted September 28, 2010 Share Posted September 28, 2010 Not this one by any chance, looks very tidy? http://hmvf.co.uk/forumvb/showthread.php?20793-1976-rhd-101fc&p=226071#post226071 Quote Link to comment Share on other sites More sharing options...
0 antarmike Posted September 28, 2010 Author Share Posted September 28, 2010 No not been advertised anywhere, I saw it on a Race Prep guys forecourt. witrh a forsale sign in the window. Civilian registration ARR736Y Military reg 01 AM 15 (RAF??) Chassis 95601067 A Contract FVE 21 A/ 230 Code AVC 1826 at pesent it is on 31 x 15.5 - 15 Agric floatation tyres so sits low and looks most odd. Quote Link to comment Share on other sites More sharing options...
0 Rover8FFR Posted September 28, 2010 Share Posted September 28, 2010 Not sure if they are still available but Clive Elliott had a pair (F&R) of 101 axles for sale recently. Open to 'sensible' offer if they are still available. Axles are quite rare for these and if new mortgage prices attached....... Just a thought m8. :-) Quote Link to comment Share on other sites More sharing options...
0 antarmike Posted September 28, 2010 Author Share Posted September 28, 2010 I drove it home this afternoon, and the Axles sounded okay, but thanks. Quote Link to comment Share on other sites More sharing options...
0 antarmike Posted September 28, 2010 Author Share Posted September 28, 2010 (edited) 101 club and register has just got back to me:- The register confirms that this truck was RAF. It was struck off from RAF Boongate on 01 11 1992. It is logged as a GS Rapier trt and was supplied to Ashchurch holding depot. Factory in date is 20 09 1977 and Factory out date is 27 09 1977. Edited September 28, 2010 by antarmike Quote Link to comment Share on other sites More sharing options...
0 Tony B Posted September 28, 2010 Share Posted September 28, 2010 I drove it home this afternoon, and the Axles sounded okay, but thanks. That's unusaual! On freewheel the front axle sounds like a bag of bolts. :-D Quote Link to comment Share on other sites More sharing options...
0 antarmike Posted September 28, 2010 Author Share Posted September 28, 2010 (edited) According to the number plates it has been through PRB services in the days before 01 numbers. Edited September 28, 2010 by antarmike Quote Link to comment Share on other sites More sharing options...
0 Stormin Posted September 28, 2010 Share Posted September 28, 2010 That's unusaual! On freewheel the front axle sounds like a bag of bolts. :-D That's usually the front propshaft, a renowned 101 feature. Some people claim to have cured it by re-setting the prop joints out of phase. Quote Link to comment Share on other sites More sharing options...
0 antarmike Posted September 28, 2010 Author Share Posted September 28, 2010 Vinyl lettering (removed) on the door tops reads "Ogdens" Mean anything to anyone?? Quote Link to comment Share on other sites More sharing options...
0 Stormin Posted September 28, 2010 Share Posted September 28, 2010 That looks ridiculous on those tyres Mike. Bet it's got more grip and off road ability than standard bar grips though. What I'd give for that left hand rear bumperette! I've retrofitted a Nokken on my vehicles but haven't been able to aquire the rear bumperette which includes winch fairlead mounting. If you remove it to do cross member repairs I'd be interested in borrowing it as a template to copy and modify one of mine standard ones. Are you sticking with the home made truck cab or going back to canvas roof? All the hoops were available from the 101 club shop, last I looked, for ridiculously cheap prices. Quote Link to comment Share on other sites More sharing options...
0 antarmike Posted September 28, 2010 Author Share Posted September 28, 2010 (edited) That looks ridiculous on those tyres Mike. Bet it's got more grip and off road ability than standard bar grips though. What I'd give for that left hand rear bumperette! I've retrofitted a Nokken on my vehicles but haven't been able to aquire the rear bumperette which includes winch fairlead mounting. If you remove it to do cross member repairs I'd be interested in borrowing it as a template to copy and modify one of mine standard ones. Are you sticking with the home made truck cab or going back to canvas roof? All the hoops were available from the 101 club shop, last I looked, for ridiculously cheap prices. I might get the hoops whilst I can but won,t fit them at the moment. I plan to fit my 13.5KVa three phase genny in the back, and use it for site welding jobs that come my way. Having no hood seems sensible for this use, It will be in a locked shed every night, so all should be away from prying eyes. Pretty sure I have 5 proper rims sorted, so now I am looking for rubber. I may keep these wheels to bang on if a job comes up for welding in the middle of the Fens, They look like they will cope quite well... Edited September 28, 2010 by antarmike Quote Link to comment Share on other sites More sharing options...
0 Degsy Posted September 28, 2010 Share Posted September 28, 2010 Vinyl lettering (removed) on the door tops reads "Ogdens" Mean anything to anyone?? Since it must have been sold by PRB in Leeds it might well be Ogdens of Otley, they are involved in earthmoving, quarrying etc. Quote Link to comment Share on other sites More sharing options...
0 robin craig Posted September 29, 2010 Share Posted September 29, 2010 The tyre look suspiciously like those fitted to a Supacat. What does the 101 club charge you as a member to trace the vehicle's history? Is there a limit to how many they will do that you own? Will they do non Land Rover vehicles as well? Do they provide paperwork supporting their findings? R Quote Link to comment Share on other sites More sharing options...
0 antarmike Posted September 29, 2010 Author Share Posted September 29, 2010 They haven't really traced history, the build data probably comes from leyland paperwork, not Military sources. I just put question on their message board and answer came back within minutes, so I guess they have this rudimentary info on quite a lot of the 101's. You would have to ask them about multiple info or other vehicles. The club runs with charitable aims, and is not intended to make a profit for anyone. I will be contacting RAF Museum at Hendon soon to see if they have record card. Quote Link to comment Share on other sites More sharing options...
Question
antarmikeI have just bought a 101 FC Land-Rover.
Can anyone point me to a register or the like who can date the vehicle from Chassis number or link Chassis number to Military reg number?
Edited by antarmikeLink to comment
Share on other sites
Top Posters For This Question
43
9
8
6
Popular Days
Oct 2
16
Sep 28
13
Sep 27
11
Nov 18
10
Top Posters For This Question
antarmike 43 posts
sean101ryan 9 posts
Tony B 8 posts
Stormin 6 posts
Popular Days
Oct 2 2010
16 posts
Sep 28 2010
13 posts
Sep 27 2010
11 posts
Nov 18 2010
10 posts
Posted Images
88 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.