DFC1943Fl.Lt. Posted Sunday at 02:26 PM Share Posted Sunday at 02:26 PM Hi all, I'm looking for a replacement Dingo distributor complete with cap, points and rotor arm. Any help would be appreciated. Also a set of non screened plug leads, need to change the whole set up as its a nightmare with what I've got. A mate has changed his to a single set points system and says it is a lot easier. TIA. Steve. Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted Sunday at 03:12 PM Share Posted Sunday at 03:12 PM Steve, I assume you need a conventional car type distributor (ie, not screened). The one that will suit is the one fitted to Daimler DB18 car or similar with the 2.5 engine. I have recently found one for a Dingo engine I am building. If you get the correct one you will know it is the correct rotation and advance degree. Try looking up people who deal with classic Daimlers. 1 Quote Link to comment Share on other sites More sharing options...
REME 245 Posted Sunday at 03:16 PM Share Posted Sunday at 03:16 PM There are Distributor Caps for Mk3's and Rotor Arms on e-bay. You can buy an electronic ignition kits for Dingo's which will replace the points. You can make up your own civilian plugs leads from commercially available components. 1 Quote Link to comment Share on other sites More sharing options...
wally dugan Posted Sunday at 03:27 PM Share Posted Sunday at 03:27 PM a few years ago MARCUS GLENN HAD NEW COMPLETE ONES 1 Quote Link to comment Share on other sites More sharing options...
RayT Posted 18 hours ago Share Posted 18 hours ago Distributor doctor might be worth a try. He is a very helpful chap. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.