graffiti Posted July 20, 2021 Share Posted July 20, 2021 I have a transfer lever rattle and see that there are no anti rattle spring plates fitted. Can they be fitted from inside the tub or is it a transmission out job?? If it can be done from above, how fiddly is it and any good tips? Cheers Quote Link to comment Share on other sites More sharing options...
graffiti Posted July 23, 2021 Author Share Posted July 23, 2021 Anyone any comment, someone must have tried it?? Quote Link to comment Share on other sites More sharing options...
sirhc Posted July 23, 2021 Share Posted July 23, 2021 Fit them from underneath. Quote Link to comment Share on other sites More sharing options...
Jerry Jeep Posted July 29, 2021 Share Posted July 29, 2021 if you fit the springs from an m38 jeep the bottom end is forked shape so you can fit them from the top or just get ww2 type and cut the bottom out of the pivot hole Quote Link to comment Share on other sites More sharing options...
graffiti Posted July 29, 2021 Author Share Posted July 29, 2021 Thanks guys, will action as advised.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.