steev Posted March 21, 2021 Share Posted March 21, 2021 Good morning I re-fitted the gearbox and transfer case back on to the jeep and after starting and engaging first gear the jeep doesn't move?. (I didn't dismantle either boxes and fitted back as is?). any suggestions please. KR Steev Quote Link to comment Share on other sites More sharing options...
0 67burwood Posted March 21, 2021 Share Posted March 21, 2021 Doesn’t move as in stuck or transfer box not engaged? Quote Link to comment Share on other sites More sharing options...
0 steev Posted March 21, 2021 Author Share Posted March 21, 2021 Gears aren't stuck they go in and out ok?, when I engage first gear and lift off the clutch pedal nothing happens?. Quote Link to comment Share on other sites More sharing options...
0 steev Posted March 21, 2021 Author Share Posted March 21, 2021 To be honest I haven't tried the transfer box I just concentrated on the gear box?. Quote Link to comment Share on other sites More sharing options...
0 67burwood Posted March 21, 2021 Share Posted March 21, 2021 Why did you take the gearbox out? if you’ve not dismantled either box and they worked fine before then it’s going to be something simple, check list : clutch fitted correctly, propshafts fitted and transfer box engaged. Quote Link to comment Share on other sites More sharing options...
0 Nick Johns Posted March 21, 2021 Share Posted March 21, 2021 (edited) The high/low transfer lever is in the midway neutral position, hence no drive. ..pull the transfer right lever back Edited March 21, 2021 by Nick Johns 1 Quote Link to comment Share on other sites More sharing options...
0 steev Posted March 21, 2021 Author Share Posted March 21, 2021 Have pulled the transfer lever back and now its moving!. Many thanks for your help as you can see I'm not the shapest knife in the draw. Quote Link to comment Share on other sites More sharing options...
0 Nick Johns Posted March 21, 2021 Share Posted March 21, 2021 (edited) make sure the left hand 4 wheel drive lever is in the Opposite Forward 2 wheel drive position too Edited March 21, 2021 by Nick Johns Quote Link to comment Share on other sites More sharing options...
0 steev Posted March 21, 2021 Author Share Posted March 21, 2021 Thank you have done and thanks to all for your help. Quote Link to comment Share on other sites More sharing options...
Question
steev
Good morning
I re-fitted the gearbox and transfer case back on to the jeep and after starting and engaging first gear the jeep doesn't move?.
(I didn't dismantle either boxes and fitted back as is?).
any suggestions please.
KR
Steev
Link to comment
Share on other sites
8 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.