hauptmanngurque Posted April 21, 2019 Share Posted April 21, 2019 (edited) Hi guys ... someone disassembled / repaired an RBJ from a cvr t? any source of spare parts for electric sockets? this RBJ clearly suffered the entrance of humidity, in some terminals it does not give continuity and / or increases the resistance to the passage of the current when it is rotated. and a 10-pin female socket is in a very bad state Edited April 21, 2019 by hauptmanngurque Quote Link to comment Share on other sites More sharing options...
jdmcm Posted May 15, 2019 Share Posted May 15, 2019 I thought I saw rebuild kits on Marcus Glenn's website...or perhaps Empire Trading in Australia John Quote Link to comment Share on other sites More sharing options...
sirhc Posted May 15, 2019 Share Posted May 15, 2019 1 hour ago, jdmcm said: I thought I saw rebuild kits on Marcus Glenn's website...or perhaps Empire Trading in Australia John Unlikely, I’ve never seen a rebuild kit. I did have some remanufactured units a while ago but Andrew Baker bought them. They are not cheap! Quote Link to comment Share on other sites More sharing options...
hauptmanngurque Posted May 15, 2019 Author Share Posted May 15, 2019 2 hours ago, jdmcm said: Pensé que vi kits de reconstrucción en el sitio web de Marcus Glenn ... o tal vez Empire Trading en Australia Juan thanks John...it is possible ...Empire Trading but only announces RBJ For Chief... Eics products, in should have the parts both completely remanufactured as individual parts ... When I have time I will dismantle it and see how bad it is ... Quote Link to comment Share on other sites More sharing options...
marvinthemartian Posted May 15, 2019 Share Posted May 15, 2019 Have you tried www.cvrtparts.com Quote Link to comment Share on other sites More sharing options...
radiomike7 Posted May 16, 2019 Share Posted May 16, 2019 Is this the part you need? https://cvrtpro.com/shop/cvrt-scorpion/cvrt-rotary-based-junction/ Quote Link to comment Share on other sites More sharing options...
hauptmanngurque Posted May 16, 2019 Author Share Posted May 16, 2019 Thank you. if this is what I need ... Quote Link to comment Share on other sites More sharing options...
hauptmanngurque Posted November 22, 2020 Author Share Posted November 22, 2020 A well-spent time ... and this was on the list of pending jobs. finally I disassembled them almost completely and proceeded to a deep cleaning by ultrasound ... also change the damaged socket and and grease the collector tracks with Stabillant 22 now there is continuity in all circuits! 1 Quote Link to comment Share on other sites More sharing options...
andym Posted November 23, 2020 Share Posted November 23, 2020 Impressive - nicely done! Andy 1 Quote Link to comment Share on other sites More sharing options...
hauptmanngurque Posted November 23, 2020 Author Share Posted November 23, 2020 9 hours ago, andym said: Impresionante, ¡muy bien hecho! Andy thanks ... i try to do a good job Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.