stevenea0038 Posted November 22, 2015 Share Posted November 22, 2015 Hi team Ideally looking for a proper sand channel for a ferret scout car near his completion. Two would be great but a single one would also suffice. Thank you. Steven Surrey Quote Link to comment Share on other sites More sharing options...
robin craig Posted November 22, 2015 Share Posted November 22, 2015 If you are lucky enough to find a set, as they are not often found, think about the consequence of haggling and being refused a purchase and how long you will regret that. It is somewhat of a sellers market. You might be lucky enough to find a set of nearly exact replicas that came off the French Eland family of vehicles, not one but a studious rivet counter will know the difference. If all else fails you can mount PSP as there is plenty of provenance for that. Being as how you are in the UK you will likely have more luck than anyone overseas. Try talking to some of the MV dealer folks, you might hear a lot of sucking teeth sounds but who knows. Good luck Robin Quote Link to comment Share on other sites More sharing options...
MatchFuzee Posted November 22, 2015 Share Posted November 22, 2015 A long shot as this is an old advert:- http://transport-equipment.armybazar.eu/uk/spare-parts/ferret-sand-channels-id18560/ Quote Link to comment Share on other sites More sharing options...
robin craig Posted November 22, 2015 Share Posted November 22, 2015 I bought one set from him, and they were from the French vehicles. I made a big song and dance abut getting them out here, only to find no provenance of them ever being used on Canadian Ferrets. Boy did I feel like I was the mug! Swapped them in the end with a good friend and they now reside on his British Ferret. Robin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.