robin craig Posted July 19, 2015 Share Posted July 19, 2015 I thought I would show this here just for the record. It is a significant vehicle in my opinion. It is located at Canadian Forces Base Borden in Ontario, Canada. If you want to take photos permission has to be obtained to avoid problems s the building behind is sensitive. I visited recently and made arrangements. The colour scheme etc is not accurate and they have done the best the can with what they have. Regards Robin Quote Link to comment Share on other sites More sharing options...
robin craig Posted July 19, 2015 Author Share Posted July 19, 2015 Some more. I wonder if anyone else here notices what is significant about the vehicle? Robin Quote Link to comment Share on other sites More sharing options...
CaptMax Posted July 19, 2015 Share Posted July 19, 2015 MKI's usually have an open top hull and why are the side bins smooth? CaptMax Quote Link to comment Share on other sites More sharing options...
robin craig Posted July 19, 2015 Author Share Posted July 19, 2015 The top is closed to prevent the ingress of water and snow, quite a common modification when preparing a Ferret as a monument or Gate Guardian in Canada. Bren Carriers have it done this way also. Prevents wayward souls from using it as a haunt or place to sleep off a skin full after being in the mess, stops birds from nesting etc. From street level you cant see that it is filled in. The bin sides are smooth sheet steel as the bins are rotted and these vehicles have been out of service since 1981 and a chunk of plate is easy and expedient and the funds for such monuments are tight. What is of real significance is that this is only the second Ferret that I know of currently with the later production sloped side hatches that was in Canadian service. I will be obtaining the hull using a remote viewing technology later down he line. Robin Quote Link to comment Share on other sites More sharing options...
pru426 Posted July 19, 2015 Share Posted July 19, 2015 Robin lot of DIY and maybe mixed parts ? .. it looks that done for monument use but ..it has triangle hatches ..... early depression stop rail attachment points ...pre 1959 hull ? rear plate has canadian jerry can bracket holes and strap attachments ? maybe this sounds rivet counting but also there is a small plate welded on the front.. you found something interesting pekka Quote Link to comment Share on other sites More sharing options...
robin craig Posted July 19, 2015 Author Share Posted July 19, 2015 Dear Pekka, I am all about rivet counting on these vehicles. The plate on the front is missing whatever was on there as a plaque and shows evidence of sand blasting. The vehicle has recently been spruced up. There is another giveaway detail that confirms the Canadian connection but I will share that later Robin Quote Link to comment Share on other sites More sharing options...
CaptMax Posted July 19, 2015 Share Posted July 19, 2015 The US M series lights are a Canadian giveaway as well. Thanks for educating some of us on the differences Robin. CaptMax Quote Link to comment Share on other sites More sharing options...
robin craig Posted July 20, 2015 Author Share Posted July 20, 2015 Steve aka Capt Max and everyone else, I am no expert, an enthusiastic amateur is a description that sits better with me. The M series lights are wrong era on the front and back compared to what was in service but are merely representative of the species. There has been for many years been the folklore spread that only square hatched vehicles were in Canadian service. That is the myth I am slowly breaking down, one detail and one vehicle at a time. This monument is significant in that process. Robin Quote Link to comment Share on other sites More sharing options...
sexton Posted July 20, 2015 Share Posted July 20, 2015 Interesting, Robin. Good idea, the angled hatch, because the blind spot is huge with the square one. Is this the other one you know about? Malcolm Quote Link to comment Share on other sites More sharing options...
pru426 Posted July 20, 2015 Share Posted July 20, 2015 Robin i have noticed that canadian ferrets seem to have individual rear end plates...like finger prints and over the years holes (reg plates and jerry can brackets) are made in the local workshops ...and straps attachments so if you could find pics or etc. info about those ... also it seems that canadians received or borrowed some of the British Army ferrets and maybe Candian Army did no have to return them back due to some reasons ? :=) pekka Quote Link to comment Share on other sites More sharing options...
joeferret Posted August 27, 2015 Share Posted August 27, 2015 Robin, Very interesting thread...Keep up he good work... Quote Link to comment Share on other sites More sharing options...
fesm_ndt Posted August 27, 2015 Share Posted August 27, 2015 Robin also it seems that canadians received or borrowed some of the British Army ferrets and maybe Candian Army did no have to return them back due to some reasons ? :=) pekka That's kind of an interesting theory as the Australian Army did that on several occasions e.g. the 'other country' deemed something uneconomical to repair and the Aussies repaired it, or we just pinched it I guess Robin will track the hull numbers back to the contract. Always interesting to see the different quirks Robin finds. Quote Link to comment Share on other sites More sharing options...
ferretfixer Posted August 28, 2015 Share Posted August 28, 2015 And another thing easily noticed is. There are a LOT of external fittings missing. Which probably explains why the later Pattern of lights are fitted to this Ferret. Better astheticly to fit lights, than no lights at all. As the appropriate fittings are not on this ferret. it would indicate the difficulty in sourcing them. As well as the problem of finding the correct pattern of lights to go on it. Such a shame this specimen was not put under a covered shelter. It COULD have been then easily kept as a running Example. :embarrassed: The plate on the front hull that Pekka mentioned. MAY possibly have been a Raised mount for a brass dedication plate? Not uncommon on Museum Vehicles in some cases. Quote Link to comment Share on other sites More sharing options...
ferretfixer Posted August 28, 2015 Share Posted August 28, 2015 That's kind of an interesting theory as the Australian Army did that on several occasions e.g. the 'other country' deemed something uneconomical to repair and the Aussies repaired it, or we just pinched it I guess Robin will track the hull numbers back to the contract. Always interesting to see the different quirks Robin finds. In British Service, in some theatre's. Dependant on the length of time & how hard the vehicles were used. It was in some cases deemed uneconomical to ship the Vehicles / Equipment's back to the UK. So they were 'Gifted' to that country. It would have cost more to ship back than the cost of a Major overhaul. & they might have been at the end of their planned Life Expectancy. In Afganistan / Iraq. There are 'tales' of vehicles being 'disabled'. And then simply buried in the sand to 'dispose' of them!...............Now, where did I put my Shovel?...............:-X Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.