Masseyboy89 Posted May 15, 2015 Share Posted May 15, 2015 Hi all, After years of lusting over weasels, I decided to take the opportunity to buy one last year. I am already a way through and thought it would be nice to share my struggles with you all! I am sure I will also get loads of useful input from you too. This will not be to everybody's taste because I intend to leave the weasel the with the wrong engine and gearbox. I will be making numerous subtle modifications and fabrication to make it work but also look right. It will also be left in M29 configuration rather than M29C. With that said, I will be ploughing considerable time, money and effort into it and intend to end up with the weasel I want, that I hope others will appreciate. I have a very particular plan in mind for this truck, I have a little twist planned, which is spurring me on to complete this project, I hope you all enjoy reading about it... Quote Link to comment Share on other sites More sharing options...
Masseyboy89 Posted May 15, 2015 Author Share Posted May 15, 2015 The beginning. Quote Link to comment Share on other sites More sharing options...
Gordon_M Posted May 15, 2015 Share Posted May 15, 2015 Very usable looking machine, especially the track update as that was always the weak point once the supply of originals dried up. If it wasn't for the mesh front and side it would look fine as it is. Do tell about your plans for it tho' Quote Link to comment Share on other sites More sharing options...
Masseyboy89 Posted May 15, 2015 Author Share Posted May 15, 2015 It is a good basis for a project, it has a fairly solid hull coming from a ranch in the states, unfortunately it has been well chopped about. It was also fitted with a roll cage which was removed before these pictures were taken.. The hole in the side was for a transmission cooler and the holes in the front for improved air flow through the rad. It came with an enlarged bonnet that would only fit when there was no windscreen. The running gear in the weasel is a 4.9 litre straight six running through a 3 speed auto box. The transfer box and steering box is original. The service brake no longer actuates both steering brakes, instead it uses a twin calliper disc brake which is mounted on the transfer box input flange. While not to every ones liking, it is a practical and reliable solution, service items are also cheap and readily available. Quote Link to comment Share on other sites More sharing options...
Masseyboy89 Posted May 15, 2015 Author Share Posted May 15, 2015 Quote Link to comment Share on other sites More sharing options...
Masseyboy89 Posted May 15, 2015 Author Share Posted May 15, 2015 The first thing that I did was start to sand through decades of paint, filler and primer in an attempt to find markings. It was originally OD with 'ordnance depot' stencilled on the front quarters. It was later painted blue and used by the U.S.A.F, on the drivers side I have found it's serial number and USAF stencilled in yellow. The weasel was brought into the workshop and stripped down. I started with the engine side and engine bay area. Transmission cooler - grill removed, the hole was roughly cut using a gas axe With the fuel tank removed the old transmission cooler was unbolted and scrapped, along with the crude angle iron side steps. The weasel still requires a transmission cooler, however, it will be positioned differently. I enlarged the hole, clean cutting the sides. I made a new panel with fresh steel sheet, spot welding it to the frame work underneath, I then gradually seam welded the repair piece into the surrounding hull. I later dressed the welds back and applied several coats of high build primer, block sanding by hand after each coat with a 240 wet and dry. when I was happy with the finish the area was etch primed. Quote Link to comment Share on other sites More sharing options...
Masseyboy89 Posted May 15, 2015 Author Share Posted May 15, 2015 Looking at old photographs I was able to determine the rough shape and size of the steps. Parts of the original steps remained spot welded to the track guards, once removed I could accurately place the newly fabricated step in the correct place, I was also able to match the width and steel thickness of the old one and scale it correctly. Quote Link to comment Share on other sites More sharing options...
Enigma Posted May 20, 2015 Share Posted May 20, 2015 I'd love to have a Weasel one day. Don't worry about the non Original engine, I wouldn't mind that much either. Good luck with the resto. Quote Link to comment Share on other sites More sharing options...
Terra1936 Posted March 27, 2021 Share Posted March 27, 2021 Did you ever get any farther on the Weasel? Quote Link to comment Share on other sites More sharing options...
C.Emilsson Posted March 26, 2023 Share Posted March 26, 2023 hi anyone here know m29 weasel gear ratio transfer case final drive hi and low regars from sweden Quote Link to comment Share on other sites More sharing options...
ozm29c Posted March 31, 2023 Share Posted March 31, 2023 On 3/27/2023 at 5:01 AM, C.Emilsson said: hi anyone here know m29 weasel gear ratio transfer case final drive hi and low regars from sweden Jeep Tom over your way may be worth contacting for help. https://forum.portrayalpress.com/topic/66-jeep-tom-and-my-weasels/#comment-406 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.