Jump to content

Richard Farrant

Moderators
 View Profile  See their activity

  • Posts

    11,470

  • Joined

  • Last visited

  • Days Won

    45

 Content Type 

Everything posted by Richard Farrant

  1. Richard Farrant
    Hi Bob, As far as I am aware, the Q25 was a normal control cab (ie with bonnet) and built from 1940. The photo below of a N1 is from an old book called Preserved Lorries and the cab seems to look very similar to the truck on the wagon.
  2. Richard Farrant
    Bob, It looks like a Commer N1, built between about 1933 and 1938, I would suggest it to be an impressed lorry and not of military issue, like many other oddities seen in photos at that time in France.
  3. Richard Farrant
    Another solution would be to use Rivnuts
  4. Richard Farrant
    A common problem was oil and dirt blocking the fins in the outside of the radiator, on the fan side. The radiator is easy to remove and you will the be able to clean it easily. First get a light and look into the fan housing to see if the fins are blocked. Another point is that there is no expansion tank for coolant on a Ferret and if you fill to the neck of the filler cap there will be some water pushed out of the overflow pipe once hot until it finds its level.
  5. Richard Farrant
    Well done Rob! Nice to get appreciation like this for your efforts. I saw your tanker at Woodchurch last year and very impressed. When I first worked on Militants over 40 years ago, I had deep appreciation for them, lovely old wagons and an experience to drive them!. Good luck at the AEC Rally ...... you might be lucky there as well regards, Richard
  6. Richard Farrant
    Hi, Just a heads up, an auction coming up in Australia with a lot of Larkspur items and other items https://auctionsplus.com.au/auctions/machinery/militaria-stock-dispersal-sale-no1%2c-benalla-vic/98295. No connection, just advertising this for a friend.
  7. Richard Farrant
    Hi Steve, Thanks for the heads up on this, I found the link and copied it below.. Remember seeing this before, but was worth watching again, a very clever old guy. https://www.abc.net.au/news/rural/programs/landline/2020-09-05/vintage-mill:-a-unique-mill-and-its-extraordinary/12633822
  8. Richard Farrant
    If the lever was cut off at the bottom to clear the engine flywheel housing (?), then surely the only thing to do is to to increase the movement of the lever in the cab to compensate. To do this it would mean the pawl that engages with the gate would be further forward, so the gate could easily be modified. This all depends on whether there is enough room for the lever to go further forward without touching the engine cover. A much easier solution I would have thought.
  9. Richard Farrant
    The pushrod should generally have a small clearance of approx 3mm or so
  10. Richard Farrant
    Having entered this show, every year from when it started in 1982 as an IMPS club display at Tenterden railway station, I feel it had lost its attraction at the last one in 2019 and vowed then, not to do it again. Many fellow members of IMPS and MVT used to go there and it was a good place to catch up, but in the last few shows at Beltring many faces are now missing. We had the best days when Rex was running it, it had good atmosphere in those days. I have my thoughts on why this year's launch is so late ...
  11. Richard Farrant
    As your WOT6 now has a different engine, does it mean that the mounting point of the operating lever in the cab has been changed, as this could have a bearing on your problem. Never had any issues with this on the WOT6 that I worked on as it had original V8 fitted.
  12. Richard Farrant
    To me I would say the bearings have been fitted the wrong way around. Normally any wheel bearing has the cup fitted in the wheel first and cones from the outside, cannot see how they can be adjust going by these photos.
  13. Richard Farrant
    Sorry, you have got me there, I cannot remember now, must have been about 15 years ago. I don't have a manual either. Richard
  14. Richard Farrant
    On the WOT6 that I was involved in restoring, I rewired it myself and it is quite a simple system. When you put the wiring to the rear of the vehicle, just use trailer cable and that will suit all your needs. The instrument panel is dead easy to access. regards, Richard
  15. Richard Farrant
    Check to see if the breather in the master cylinder filler cap is clear. Also check that it has the correct clearance on master cylinder pushrod. Make sure the master cylinder is not overfilled.
  16. Richard Farrant
    Hi Tony, I was very sorry to have missed this year's Swim-In as I had attended all the previous 10 events, and 4 more back in the late 90's. Circumstances being what they are I thought it wise not to travel as I have escaped the wretched virus up to now. Nice set of boots on your new project 👍 best regards, Richard
  17. Richard Farrant
    I have been watching his Youtube channel for a while and very interesting.
  18. Richard Farrant
    Hi Tony, Great to see you have finally joined us! Your Blitz is looking as good as ever. regards, Richard
  19. Richard Farrant
    It does indeed seem to be a pre-1949 trailer as the plate shows a YM number. The air cooled generator was 110 volts as I recall when working on them back in the 70's era. The previous Coventry Climax powered generators were 4 cylinder side valve water cooled engines and I think the same as the wartime fire pumps. I have seen these in trailers back in 70's as well.
  20. Richard Farrant
    The second holding unit is actually 1st Queens Own Highlanders
  21. Richard Farrant
    Just seen that the W&P website is now back on, but booking in vehicles or applying for tickets is not available until 19th April ! No mention of costs .......
  22. Richard Farrant
    I would say it is an Opel Blitz too.
  23. Richard Farrant
    You are correct in that the trailer appears to be from the WW2 period as the X census number comes up in the Chilwell list date Nov. 1944. That being said, I recall the trailers and generators which I worked on had post 1950 registrations numbers. Also think the air cooled engine was 1950's as well. Thanks for posting the numbers up as it clarifies the period of manufacture.
  24. Richard Farrant
    The Coventry Climax generator is a postwar one, around 1950's. It has the air cooled Climax engine. I have worked on many of these in army workshops. I am sure the trailer is postwar as well as the army registration was post 1950. Similar running gear to WW2 lightweight trailers though.
  25. Richard Farrant
    On the Commer / Humber engines there is (usually) a small drain pipe under the inlet manifold. It may be missing or broken off, this will be a likely source of air being drawn in. The pipe has a small ball valve at the bottom of it,
×
×
  • Create New...