Jump to content

R Cubed

Members
  • Posts

    1,678
  • Joined

  • Last visited

Everything posted by R Cubed

  1. :confused::confused: whats a B.V. :confused::confused:
  2. I will be bringing the No5 again and big gas bottle so you can use that for an out and about fry up en-route or for hot water, bacon butties ect. Also if all goes well I will bring the other tent too, same as ours last year as a covered eating chatting area...
  3. Could we have a separate thread under Plains 2009 just for a list of who and what is coming only. Would clear up any potential oops thought I was on the list.
  4. I thought they had 3 engine and were marinised Meteor V12's like out of the tanks. Had a quick scout around and found it depends on the type of boat. Length: 68 ft (21 m) Beam: 14 ft 9 in Draft: 3 ft 9 in Power plant: 3 Isotta Fraschini 57-litre petrol engines Power: 3,300 hp. Speed 48 knots (light), 43 knots (loaded and armed) Length: 73 ft (22 m) Engine: 3 Packard 12M engines for a total of 4,200 hp Speed: 40 knots (74 km/h) Range: 470 nmi (870 km) at 20 knots (37 km/h) Displacement: 47 t Displacement: 55 tons Overall length: 72 ft 6 inches Breadth: 20 ft 7 inches Draught: 5 ft 8 inches Maximum speed: 38 to 41 knots (new) Armament: auto-loading 6 pounder gun (57 mm, 2.24 inch) Two 21-inch (530 mm) torpedo tubes .303 or .50 Vickers machine guns 20 mm Oerlikon or 40 mm Bofors cannon [*]Powerplant - three Rolls-Royce or Packard 14M supercharged V-12 (three shafts) [*]Power - 3,750 hp total [*]Range - 140 miles (260 km) at 25 knots (46 km/h)
  5. Also too busy sorting out the forum...... not enough light to do anything, I know Jack you do want to sort it out....... So get on and do it :cool2:
  6. :idea::idea::idea::idea::idea: Errrrr a crane lifting a boat !!!!!!!!!!!!! merry Christmas, stop posting and sort your truck out :cool2:
  7. There is this one as well taken at Slab Common 2007 http://www.hmvftv.com/watch/3eee609d05b90c14222f/V8-Diesel-Kraz with some pics of the same truck, you just dont appreciate how big they are till you stand next to one !!!!
  8. Hope its not running on windows system would not want a blue screen moment
  9. How about this for a new indoor ride :shake: :shake: :shake: :nut::nut:
  10. kjskhshhjkskuduiwiud Ops tooo many Quality Street....................
  11. A play on words for the plains 2009 "A GMC Came Traveling" A GMC came travelling on a road from afar, 'Twas light years of time since his journey did start, And near a village he halted his truck, And it lit up the sky like a star, just like a star... He had followed a light and came down to a tent, Where others were gathered seated in chairs, A bright light shone for his truck that was there, And he had the face of a driver, and they were afraid... Then the stranger spoke, he said "Do not fear, I come from a place a long way from here, And I bring a message for all of you to hear," And suddenly the sweetest music filled the air... And it went La La... Peace and goodwill to all of you here... This lovely sound of his truck went trembling through the ground, And many were wakened on hearing that sound, And travellers on the road, the camp they found, By the light of that truck in the sky, which shone all round... And just before dawn at the paling of the sky, The stranger returned and said "Now I must eat, When four hours of time has gone by, This song will begin once again, to a GMC's roar..." And it went La La ... This song will begin once again To a GMC's roar... And it goes La La... Peace and goodwill to all men, and Where is the breakfast... Oh the whole world is waiting, waiting to hear the song again, There are thousands standing on the edge of the planes, And a field kitchen is coming, the time is nearly here, This song will begin once again, to a GMC's roar...
  12. Hi Jack, Are you now back trying to sort this out ? did your mate look at it yet ? As in the Help my GMC is Broke or summat like that, have you checked any of the bits suggested or would you like me to come down at some stage and have a look?? Forget about the alternator at the moment, this will not stop the truck starting, get a good 12v battery biggest that will fit in the tray, and go for a reputable make Lucas exide etc, don't skimp on cost it will pay off in the long run, then try to start ? what happens ? (1) starter does nothing ? problem between bat and starter. (2) starter turns slowly ? as above or naff starter. (3) starter and engine spin over quick but will not fire ? ignition problem. Go with this and let us know.
  13. Found the receipt the other day for the pipe I used. Copper Nickel 1/4" and 5/16" don't know about the nuts as I reused all the old ones suggest you give Rex Ward a try for them.
  14. Put us down for 1 GMC please for 2010 event.
  15. Happy Birthday Rosie XXXXXX :kissoncheek::kissoncheek::kissoncheek::kissoncheek::kissoncheek::kissoncheek::kissoncheek: :thanx::thanx: :beer::beer:
  16. No, but I do know where there is an LST would that be a site to load up at your location............. :shocked: :shocked: :shocked: :shocked: :shocked: :shocked:
  17. They are just the same as the one you had there in 2007, if you get that one again we could add our spare one to the side of it, so would give a size of 36 feet long X 32 feet wide.
  18. I told you, you should not of eaten that second packet of hob nobs......
  19. This is not going to clash with Bolero 2010 ?????
  20. Yes please, I would love a copy of all those pics....
  21. :cool2: :cool2: :cool2: :cool2: :cool2: :cool2: :cool2: :cool2: :cool2:
  22. If it is going to be 5 days that would be great, if it is anything like 2007 it will be well attended. How about some evening entertainment, I have 2 of the tents you had up there last time so I am sure one of them could be put next to the other one to make a nice bit of covered tentage to have a bit of a do in !!!!!!!! Jack hope you will be there for the duration this time
  23. Got some quite weird looks taking pictures of brick and concrete blocks by passers by :confused: Oh well just goes to show I must be a bit strange after all.
  24. If you are talking about the steel ones in the chassis rails there are 2 sizes. Bigger pipe from Master cylinder to Hydrovac. Then all the rest from Hydrovac to all flexible hose joints are slightly smaller, cant remember the sizes off the top of my head at the minute.
×
×
  • Create New...