Jump to content

mogmaner

Members
 View Profile  See their activity

  • Posts

    364

  • Joined

  • Last visited

 Content Type 

Everything posted by mogmaner

  1. mogmaner

    .

    mogmaner replied to 2ndArmourMad's topic in American Vehicles

    Pto generator was yoused on US Marine core jeep fitted with the Collins TCS series of radios,
  2. mogmaner
    Welcome
  3. mogmaner
    Looking for install information for vrc321 and auto atu . I have pair with matching serial number but no cables .
  4. mogmaner
    Check for oil contamination ,this can give the fault you have .
  5. mogmaner
    I started with the intention of yousing the EFI setup ,but it refused to work even with all the system taken from a running downer. So went old school Land Rover distributor electronic points and modified 1.6 rover manifold with 1 3/4 SU .Which ever way you go look forward to seeing the finished results.
  6. mogmaner
    The other way is to go old school back to carb and points ,this is how I fitted my Munga with a Nissan 16v twin cam.
  7. mogmaner
    Kemper parts list a rebuild kit for the master cylinder .Metz autoteile also has brake parts have yoused both with no problems
  8. mogmaner
    Cylinder is ATE Lockheed, as are the wheel cylinders which are 1 1/16 ",Available in uk ,will lookup details when I get home.and check for master cylinder seals size.Graham
  9. mogmaner
    The munga carb is very similar to the 404s unimog, so over hall and tuning should be similar.
  10. mogmaner
    Will check my hand book when I get home this evening.
  11. mogmaner
    Are you checking the voltage with a battery connected ? With no load the regulator has no reference voltage .40 to 50 volts is not uncommon in a open circuit situation .
  12. mogmaner

    New toy

    mogmaner replied to Mk3iain's topic in British Vehicles

    The gear box is based on the 5 speed fitted to the v8 90s built before the R380 came in with defender name , oil will be listed for this box in the UK.
  13. mogmaner
    You could build a clear plastic tube around it to replicate the torpedo filled with water.
  14. mogmaner
    Could the model track links be up scaled then 3d printed to form a casting pattern.
  15. mogmaner
    The upper cab may have been fitted as part of a snow plough or blower installation.
  16. mogmaner
    You could try Metal shrinking, heat yousing soap as a temp gide the quench with cloth soaked in cold water on the out side,this will make the outer surface to shrink faster on outside than the inside ,slowly pulling the twist or dint over multiple heating and coolings ,worth trying on a piece of scrap material to gain a feel for how the metal moves.
  17. mogmaner
    Should be powers by a lister B or Petter A petrol engine if I remember correctly.
  18. mogmaner
    Looks like a pump from a fuel bowser .
  19. mogmaner
    Could you put a ruler against the build sockets for size reference.
  20. mogmaner
    Yes the handles are common to merc and maybe other German trucks. Yoused on unimogs from the first 2010 mog of 1947 though into the 404s in the 1970s
  21. mogmaner
    Not sure how well this will show.
  22. mogmaner
    Looks like land rover hinges ,unimog door handles and indicators look like the one's fitted to my unimog 401
  23. mogmaner
    Cj3b mahindra parts may fit.
  24. mogmaner
    The axle looks like TJ Bedford with the hub changed .
  25. mogmaner
    That fits ,my father was involved in rewiring the fone system while the new runways where laid for the jets .
×
×
  • Create New...