marvinthemartian

Hi Bill, Marcus Glenn does a good engine blue, in tins and aerosol, good coverage too. http://www.marcusglenn.com/index2.html It's what I'm using on my Martian engine. Simon

Hi Simon, you're right that Unipren is no longer manufactured, you'll also find that there are also short lengths of Unipren 50, between the generator and generator panel, and from there to the distribution box, which is coloured blue, also possibly 1 length of Unipren 18 too, also blue which comes from the distribution box to I think the instrument panel feed. Not sure if Champs are the same, but would presume so, then Unipren 135 may be used for the battery leads. What I have been doing is buying up NOS electrical leads for other vehicles, then simply stripping them. Lots of conduits around for Saracen, Saladin & Ferret. Whether Tim Vibert at Empire Disposals has anything suitable, it may be worth checking. Simon

Actually spotted yesterday doing a fly by the other side of town. Not a brill picture, had to use full zoom on camera.

Now we've had a few days decent weather, I've managed to get a few more things done. The coil is now reassembled, and I have nearly finished repainting a spare junction box. Also found a brand new cover for this too. Got it painted, and then had a visit from a suicidal fly! Got the battery boxes and lids back from blaster with a bit less metal on them, which I have started to work on. The blasting did uncover the Fv number on the side of the box. Started on the rusty lid by cutting out a decent chunk, and taking it to good metal. I did weld it a bit at a time, to try and avoid excessive heat, but still managed to warp the lid a little bit. But when I eventually got it to fit on the battery box, I can't believe just how blooming hard they are to get on,lots of silicone spray needed, jumping on it, plastic hammer, it didn't look to bad. A good sanding, a small amount of filler, a quick spray over of primer and all looks good. I have finally found a decent kigas tank, I have been on the lookout for one of these for ages, as my original one is past it. So another item crossed off my shopping list. Cleaned up it does look in very good nick. Thanks to a bit of sun today, also managed to get a few small items painted. Lots of bits on the go here, another horn unit, door handles, lamp and switch brackets, pipe clamps and other sundry bits.

Just came back from a short holiday on the Isle of Wight, filled up with diesel at Sainsburys in Newport, petrol @ 129.9p per litre, diesel 134.9p. Back home, close, petrol 130.9p, diesel the same. Simon

Are you taking yours up Rob? I may have a wander over as not at work that weekend.

:rotfl::rotfl::rotfl::rotfl: Good thread, doing some good work there.

Is there a RE number on it? I reckon core plug tool too. There seem to be four different sizes of tool, 0.325" centres, 0.400" centres, 0.500" centres and 0.700" centres.

Just reading through this and I think you have done a cracking job, well done.

Finally had a few days of sunshine, suppose thats now summer over! Spent some time outside doing bits and bobs. Got a few items sorted out and sent off for shot blasting, battery boxes being the main items as they are very rusty, do have spares Also managed to save the brass plates off of the lids, and clean them up, oddly, for the same plate the wording is different. Also on the blasting list are spare front brake cylinders, unfortunately when these were taken off the donor vehicle, the mounting flanges broke, due to the electrlytic action of steel and aluminium, so will need to repair these afterwards. The old brake hoses were also stripped, and the springs were put into the blasting box, and the other bits were clean up in the shed, the swivelling nut was also freed off, as was totally seized, which makes removal of the pipe blooming awkward. These hoses were original parts, even down to the Westinghouse logo, the pink piece on the hose, not seen that before, but then not honestly looked at them too closely on my truck. Have also aquired more palm couplings, and have got these stripped and sent off for blasting. [ATTACH=CONFIG]75074[/ATTACH] Last job I have been on with is refurbishing another coil, handy to have a spare, so got stripped and started painting.

Car or lady......, or both?

Progress is currently slow due to blooming wet & cold weather, but I have been beavering away in my shed doing the odd little bits, and on the very odd occassion we have had a bit of sunshine, a very small amount of painting, though only undercoat. One job I have redone because I wasn't overly pleased with the original finished result is the junction box to switchboard cable, first time I covered it with heatshrink tubing, but that seemed to spoil the look, so have stripped it completely and finished it off with braiding, now looks a proper job! Original finish. Repairing again. Sliding the braiding over. The finished look, much better! The only other things I have been up to is remaking the rifle butt block securing surrounds, and finishing off cleaning up and undercoating the removable floor panels. The original surrounds looking a bit shabby. The new ones made up and sanded smooth, ready for undercoat. Simon

No doubt, saves time waiting for the water to boil.:-D:-D:-D

Hi Clive, I can get Milweb & ARRSE fine on my laptop, Milweb also comes up no bother on my phone too, not tried ARRSE yet. All I can think of at present is anti virus/firewall software problem. Simon

Andy, check out Milweb, http://www.milweb.net/classifieds.php?type=50, some advertised £ 130 each.

English Electric/BAe Canberra comes to mind, first flight 1949, left service 2006.

Don't panic Mr Mainwaring, had to get that one in! Welcome to the forum from a fairly close neighbour.

Feb 18th 1944, RAF Mosquitos attack the Amiens prison. Quite a number of French Resistance prisoners escaped from the Gestapo run gaol. Unfortunately, this resulted in the untimely demise of Gp Capt P.C. Pickard and his navigator, Flt Lt Alan Broadley, amongst others.

No probs. He does also lists an earlier parts list 12813, but I'm not sure if it's any good or not, as I've not come across it before.

I don't know either, possibly water/ballast tank? Certainly looks odd.

Duncan, to get started on obtaining some manuals, try Mark at vintage mv manuals. http://www.mark.clubaustin.co.uk/index.htm He can supply copies of N622 Technical Description, 12239 User Handbook, 14886 Illustrated Spare Parts List. I have a couple of Service Schedule copies if you want one. Simon

It could be a case of the reflectors were thrown at the vehicle, and where they hit, that's where they were screwed on!!!

That's odd, from pictures that I've see, the reflectors were fitted to the wheel arches , at the front part of the front wheel arch, and at the rear of the rear wheel arch. Much like this.

Duncan, they do come up on ebay once in a while, or the components required can be got separately, ie cheap no plate lamps, use the back half of that and the trumpet cone side lamp lens. It's quite possible that I have some extra in the shed, as I seem to aquire things that may be of use in the future. As for brake pipes, the book says thay should be copper tubing, but that's b*ll*x, the pipes I've removed for cleaning/stripping have been steel, so I would guess bundylin, so any steel tube would suffice, just need to get the bends correct, or as near to. I'm pretty sure the brake pipes were finished with olives at the ends.

The side lights were origainally like these. Though I think maybe the FV1110 and FV1119 were of that type, or the larger 4" diameter lense. The handbrake shoes have a material thickness of 5/16", not a lot, but then they shouldn't really do a lot of work. I think that outrigger lamps are a legal requirement on vehicles over a certain length, whereas on your truck they have been retro fitted on the cab sides just behind your back doors. I have found a slightly better shot of the location, circled in red. This is the type fitted, made by Britax or similar. The entire trafficator system would've been removed at the time of upgrade, I don't think that I've ever come across any decent pics of any before the upgrade. Simon