attleej Posted May 6 Share Posted May 6 Dear All, I have been given an old but little used oxy/propane cutting machine to overhaul. The owner bought it new but unfortunately the track was lost and the machine was put to one side for many years. Does anyone know what the tracks looked like? Particularly the cross section that the drive wheels ran in. John Quote Link to comment Share on other sites More sharing options...
radiomike7 Posted May 6 Share Posted May 6 Hello John, This is supposedly a Bantam 3, might it use a similar track? Quote Link to comment Share on other sites More sharing options...
Adrian Barrell Posted May 6 Share Posted May 6 (edited) If it's a BOC Pug, I have one with a long and short track. I can measure and photograph it in the morning but it's an Aluminium extrusion, about 6" wide with four raised ribs. One about 1/4" in from each side for the drive wheels and a pair with a 1/4" gap between them in the centre for the support wheel. Edited May 7 by Adrian Barrell Quote Link to comment Share on other sites More sharing options...
attleej Posted May 6 Author Share Posted May 6 Thank you Adrian and Mike. That is all the info that I need. I have made it work in a slightly different way. John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.