Jump to content


Recommended Posts

Dear All,

I have been given an old but little used oxy/propane cutting machine to overhaul.  The owner bought it new but unfortunately the track was lost and the machine was put to one side for many years.

Does anyone know what the tracks looked like?  Particularly the cross section that the drive wheels ran in.



Link to comment
Share on other sites

Posted (edited)

If it's a BOC Pug, I have one with a long and short track. I can measure and photograph it in the morning but it's an Aluminium extrusion, about 6" wide with four raised ribs. One about 1/4" in from each side for the drive wheels and a pair with a 1/4" gap between them in the centre for the support wheel.

Edited by Adrian Barrell
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...