HotBed Posted February 11, 2019 Share Posted February 11, 2019 You just need the bolt on bracket like me !. Quote Link to comment Share on other sites More sharing options...
Ron Posted February 11, 2019 Share Posted February 11, 2019 Nope! As Steve said, his bike has the later welded on field stand pivot. Here is my complete original field stand again....With the clamp on pivot. Ron Quote Link to comment Share on other sites More sharing options...
HotBed Posted February 11, 2019 Share Posted February 11, 2019 I was looking at pictures without my reading glasses on Ron 🧐 🙃 Quote Link to comment Share on other sites More sharing options...
HotBed Posted February 11, 2019 Share Posted February 11, 2019 2 hours ago, flyingfleasteve said: One of the hardest parts to source to date was an orginal field stand. My particular bike has the later welded lug, 6 months of searching I found a genuine field stand tucked away in France, a little worse for wear but solid all the same. It finally arrived through the post today, still with signs of military paint in places too! Being nosey, how did you find out about it in France Steve ?. Quote Link to comment Share on other sites More sharing options...
flyingfleasteve Posted February 11, 2019 Author Share Posted February 11, 2019 That’s a lovely find Ron, I must say I have never seen the earlier ‘clamp on’ stand before! It’s in great condition too! Graham I found it after a lot of internet searches. Quote Link to comment Share on other sites More sharing options...
HotBed Posted February 11, 2019 Share Posted February 11, 2019 Well done Steve. Quote Link to comment Share on other sites More sharing options...
Ron Posted February 11, 2019 Share Posted February 11, 2019 Yes Steve it's the only one I've ever seen, and now fitted to my 5SW. My engineer copied the clamp for my 3SW and a couple of mates. Ron Quote Link to comment Share on other sites More sharing options...
flyingfleasteve Posted February 12, 2019 Author Share Posted February 12, 2019 Nice job on the copies! Quote Link to comment Share on other sites More sharing options...
Ron Posted February 12, 2019 Share Posted February 12, 2019 (edited) Indeed Steve. I have very good engineers around me, unfortunately not getting any younger and heady for retirement😢 They are perfect copies and they did 3 pairs for me at £100 each pr, which considering the normal hourly rates of today, I thought was very reasonable. Ron Edited February 12, 2019 by Ron Quote Link to comment Share on other sites More sharing options...
flyingfleasteve Posted February 12, 2019 Author Share Posted February 12, 2019 That's extremely reasonable Ron! I can only imagine the work that's must have gone into each of them! Are you able to pinpoint when Triumph changed for this 'clamp on' style to the later welded lug? Quote Link to comment Share on other sites More sharing options...
Ron Posted February 12, 2019 Share Posted February 12, 2019 I can't pin point it, but these bikes are from contract C3360 in 1939 and clearly show the clamp (also note the 6" headlamps) and we know of 1940 bikes with and without the welded on pivot, obviously at some point in 1940. We can only narrow it down by a process of elimination and any photographs that may show it??? What contract is your bike from? Ron Quote Link to comment Share on other sites More sharing options...
flyingfleasteve Posted February 12, 2019 Author Share Posted February 12, 2019 Great photo!! All of the Lucas MT110'tail lights appear to be missing? My bike is from contract C6128 Quote Link to comment Share on other sites More sharing options...
Ron Posted February 12, 2019 Share Posted February 12, 2019 Yes the tail lamps or missing for some reason? There is a package attached to each carrier, which is probably the tool kit? That's interesting. My 3SW is also from contract C6128 but is from the first batch of numbers C72523. It had the spring clip lug but no sign of a pivot lug ground off, so I must assume it would have had a clamp. So the next part of the equation is, what part of that contract is yours from? .......Frame number? Ron Quote Link to comment Share on other sites More sharing options...
flyingfleasteve Posted February 13, 2019 Author Share Posted February 13, 2019 Graham the exhaust paint I use..... Quote Link to comment Share on other sites More sharing options...
HotBed Posted February 13, 2019 Share Posted February 13, 2019 Cheers Steve. Quote Link to comment Share on other sites More sharing options...
HotBed Posted February 13, 2019 Share Posted February 13, 2019 (edited) On 2/12/2019 at 9:15 AM, Ron said: I can't pin point it, but these bikes are from contract C3360 in 1939 and clearly show the clamp (also note the 6" headlamps) and we know of 1940 bikes with and without the welded on pivot, obviously at some point in 1940. We can only narrow it down by a process of elimination and any photographs that may show it??? What contract is your bike from? Ron What’s the box under the seat, looks too big for a MCR1 regulator ?. The tyres look almost the same tread pattern as the Ensign. Edited February 13, 2019 by HotBed Quote Link to comment Share on other sites More sharing options...
Ron Posted February 13, 2019 Share Posted February 13, 2019 When I zoom in on that picture, I can see the clamp on regulator, the field stand clamp and the mudguard behind which is exactly what I have. The tyres are most likely 'Dunlop Universals' Ron Quote Link to comment Share on other sites More sharing options...
flyingfleasteve Posted February 13, 2019 Author Share Posted February 13, 2019 A little job now done, the newly rebuilt gearbox and dynamo placed back in the frame! Quote Link to comment Share on other sites More sharing options...
HotBed Posted February 13, 2019 Share Posted February 13, 2019 You must have a bigger zoom than me Ron 😀 Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted February 13, 2019 Share Posted February 13, 2019 On 2/12/2019 at 9:15 AM, Ron said: I can't pin point it, but these bikes are from contract C3360 in 1939 and clearly show the clamp (also note the 6" headlamps) and we know of 1940 bikes with and without the welded on pivot, obviously at some point in 1940. We can only narrow it down by a process of elimination and any photographs that may show it??? What contract is your bike from? Ron The photo would have been taken at a RAOC vehicle depot no doubt and looking at the ones closest to the camera, they looked to have been allocated to 46th Division as it is marked on the saddles. The missing rear lamps may have been due to a shortage and to be fitted later. I have seen photos of lorries leaving the factory without spare tyres, but the rim was in the carrier., similar situation, shortages. Quote Link to comment Share on other sites More sharing options...
Ron Posted February 14, 2019 Share Posted February 14, 2019 Hi Richard. The pictures (I have another shot, slightly different angle) are actually taken at the Triumph factory. You can actually see a row of civy bikes further back. But those are indeed RAOC guys in attendance. O&M quote 300 in that contract being delivered to Chilwell at 50 per week. The second digit on the saddle is a bit fuzzy, but I agree 46 Div (Sherwood Forest Oak). I wonder how many made it back after the BEF retreat or have survived in France or ended up as a Luftwaffe step up? Ron 1 Quote Link to comment Share on other sites More sharing options...
flyingfleasteve Posted February 16, 2019 Author Share Posted February 16, 2019 Great picture Ron! Turning my attention to putting the bike back together the inlet manifold studs (bolting the carb to the head) are completely stripped. I am having some difficulty in sourcing the correct replacements........can anyone maybe point me in the right direction? These little studs are proving harder to source than anything else! 1 Quote Link to comment Share on other sites More sharing options...
Ron Posted February 16, 2019 Share Posted February 16, 2019 From memory the thread in the barrel is 5/16" Whit but you'd have to check. If so I found these which are probably near enough, http://www.vintage-motorcycle.com/index.php?language=en&site=4&pid=89&id=5128&limit=180 Or Ask Brian to make you some. Ron Quote Link to comment Share on other sites More sharing options...
flyingfleasteve Posted February 16, 2019 Author Share Posted February 16, 2019 Thanks Ron They look perfect! 👍 Quote Link to comment Share on other sites More sharing options...
flyingfleasteve Posted February 17, 2019 Author Share Posted February 17, 2019 So a simple job, renovating the field stand, turned into a larger project after several cracks were spotted in the the swivel pivot.....a few hours and some welding and I am hoping the issues are now remedied... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.