64EK26 Posted June 10, 2017 Share Posted June 10, 2017 Hi Just refitted the king pins on my MWC, what grease nipple should be on the lower king pin arm as you won't get a grease gun on when a standards size nipple is fitted. Is it a special nipple ? (any ideas where I can get two) or is there and extension piece, if so how long?. Thread is 1/4 NPT (I will be able to make them) Cheers Richard Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted June 10, 2017 Share Posted June 10, 2017 I would have thought a slide-on grease gun adapter which was open at the end would work, see picture here; Quote Link to comment Share on other sites More sharing options...
Danny P Posted June 10, 2017 Share Posted June 10, 2017 I also use such a slide-on grease gun adapter as is recommended by Richard but without knee and on a flexible hose and it works properly! Danny Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.