Enfield1940 Posted May 6, 2016 Share Posted May 6, 2016 Looking for a Mk2 barrel nut - the type factory fitted to the MkV Sten gun. It had a different arrangement of cooling holes to the Mk1 barrel nut (as factory fitted to the MkII Sten gun) due to the position of the foregrip attachment ring. There's a picture of one here: https://www.marstar.ca/dynamic/product.jsp?productid=81104 Would ideally like to source one from within the UK or EU. Thanks, Mark Link to comment Share on other sites More sharing options...
Chris Hall Posted May 6, 2016 Share Posted May 6, 2016 I think that's the later Mk5 nut, the earlier nut had the rows of holes but they had the same number, ie 2 rows of 6 where as the later had one row of 3 and one row of 6 at the front. The mk2 had 3 rows of 3. you would need the earlier type for wartime mk5s. You could of course convert a mk2 into a mk5 if need be. Looking for a Mk2 barrel nut - the type factory fitted to the MkV Sten gun. It had a different arrangement of cooling holes to the Mk1 barrel nut (as factory fitted to the MkII Sten gun) due to the position of the foregrip attachment ring. There's a picture of one here: https://www.marstar.ca/dynamic/product.jsp?productid=81104 Would ideally like to source one from within the UK or EU. Thanks, Mark Link to comment Share on other sites More sharing options...
Freeland Posted May 10, 2016 Share Posted May 10, 2016 Hi Mark, Chris is right; the barrel nut on the MKV has equal holes on each side. Here's a picture of my wartime MKV (zoom to see the barrel nut): KR Marco Link to comment Share on other sites More sharing options...
Recommended Posts