pauletto Posted August 3, 2014 Share Posted August 3, 2014 YES Paul, which is really too hot in Italy, about 35 ° C, then they are not very capable of doing plumbing and air around me becomes even more hot :embarrassed: :laugh: Quote Link to comment Share on other sites More sharing options...
pauletto Posted August 10, 2014 Share Posted August 10, 2014 Still some minor adjustments and also the rear fenders will be ready Quote Link to comment Share on other sites More sharing options...
pauletto Posted August 21, 2014 Share Posted August 21, 2014 Whenever I build a piece of the body and the attachment to this car, I look at her and I always doubt something was wrong, then after a moment of panic, I tell myself stupid the car and asymmetric, the right is not equal to left Quote Link to comment Share on other sites More sharing options...
Alex van de Wetering Posted August 25, 2014 Share Posted August 25, 2014 Really nice work Pauletto. And that bead roller is a very good investment! Alex Quote Link to comment Share on other sites More sharing options...
lssah2025 Posted August 29, 2014 Author Share Posted August 29, 2014 Luigi, send me your address I have some of your goodies for the Humber that I am sending over. Quote Link to comment Share on other sites More sharing options...
fesm_ndt Posted August 29, 2014 Share Posted August 29, 2014 [ATTACH=CONFIG]96032[/ATTACH] Quote Link to comment Share on other sites More sharing options...
pauletto Posted August 29, 2014 Share Posted August 29, 2014 Who can help me, I have to rebuild the driver frame glass of the glass, I could use some nice pictures and if it were possible measures What you see, is all that remains after a war and 60 years out in the rain I'd be really grateful Quote Link to comment Share on other sites More sharing options...
lssah2025 Posted August 29, 2014 Author Share Posted August 29, 2014 Luigi, I will try and get some measurements, better yet send a email to Joe, it is at his house to do some minor work. I think there is a drawing/full size diagram that was done for the window and frame, it might be at the shop. Quote Link to comment Share on other sites More sharing options...
paul_bish Posted August 30, 2014 Share Posted August 30, 2014 some amazing fabrication work going on here! really impressive Quote Link to comment Share on other sites More sharing options...
pauletto Posted August 30, 2014 Share Posted August 30, 2014 (edited) I'm going to step forzatefitting finally I finished shutter observation, the next step driver's windscreen Edited August 30, 2014 by pauletto Quote Link to comment Share on other sites More sharing options...
pauletto Posted September 16, 2014 Share Posted September 16, 2014 the driver's seat, its measures were obtained from the poor remaining pieces, I hope I did it right or almost right Quote Link to comment Share on other sites More sharing options...
pauletto Posted September 29, 2014 Share Posted September 29, 2014 Now is the time to rebuild the windshield, this Humber is like the Easter egg, there are always surprises me when I rebuild something Quote Link to comment Share on other sites More sharing options...
lssah2025 Posted September 30, 2014 Author Share Posted September 30, 2014 Very nice Luigi, were you able to get the measurements from Joe? Quote Link to comment Share on other sites More sharing options...
pauletto Posted October 1, 2014 Share Posted October 1, 2014 I wrote, but I do not know if you got the email, but your friend on FB sent me photos of your HSC, and with my rusty old piece, I found some right size Now I need some photos to know how you did the driver's seat cushion, in which the material was done? Leather or cotton, and the right color of leaher, black brown or other ?? ask for advice Quote Link to comment Share on other sites More sharing options...
lssah2025 Posted October 1, 2014 Author Share Posted October 1, 2014 I have seen leather and canvas (a tankers one I have 44 dated is tan), some pics from Bovington look like brown leather, so I would either say (OD) canvas or brown leather. I will ask some other Humber enthusiast. Quote Link to comment Share on other sites More sharing options...
pauletto Posted October 11, 2014 Share Posted October 11, 2014 (edited) still some adjustment and also the windshield is finished, another piece in less to do Edited October 11, 2014 by pauletto Quote Link to comment Share on other sites More sharing options...
lssah2025 Posted October 15, 2014 Author Share Posted October 15, 2014 (edited) Let me know when the package arrives, has some of the parts for the dash etc.. Edited October 15, 2014 by lssah2025 Quote Link to comment Share on other sites More sharing options...
pauletto Posted October 15, 2014 Share Posted October 15, 2014 Thank you very much, arrived today, so I have something to send you, if you have not already found it, I have bags under attack bren to gather ammunition fired, I do not ever'll find the support, and if I had not in Italy you can walk around with 2 bren Humber, I would have the row of police cars that would take me directly to jail:cry: Quote Link to comment Share on other sites More sharing options...
lssah2025 Posted October 16, 2014 Author Share Posted October 16, 2014 No worries Luigi, I have the gauges being rebuilt at this time, so will send another package out then.. Quote Link to comment Share on other sites More sharing options...
pauletto Posted November 22, 2014 Share Posted November 22, 2014 Slowly, the stuff to do are starting to be less than those made Quote Link to comment Share on other sites More sharing options...
lssah2025 Posted November 28, 2014 Author Share Posted November 28, 2014 Very nice Luigi, starting to look more and more like a HSC.. Quote Link to comment Share on other sites More sharing options...
pauletto Posted December 21, 2014 Share Posted December 21, 2014 Lock made, a good caster and a new file and the problem is solved Quote Link to comment Share on other sites More sharing options...
pauletto Posted January 25, 2015 Share Posted January 25, 2015 After the great meals of Christmas, we must go back to work, the engine bulkhead and a battery holder were so corroded that I had to cut a part of the bulkhead, and completely redo a battery holder Quote Link to comment Share on other sites More sharing options...
lssah2025 Posted January 25, 2015 Author Share Posted January 25, 2015 Nice job on the battery trays, I am redoing mine too. Quote Link to comment Share on other sites More sharing options...
pauletto Posted March 2, 2015 Share Posted March 2, 2015 I finished the finished carrier battery, I had no design with measures covers battrey, only the design of the manual I hope I did right, here in Italy I have no chance of seeing another HSC, someone correct me if I'm wrong Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.