R Cubed Posted June 10, 2012 Share Posted June 10, 2012 Does anyone know how to adjust the 12 volt charging voltage on these generators ? When running off load or on load I am only getting about 13.2 volts, not enough to put in what has been taken out in starting the beasie, and to keep the battery charged. Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted June 10, 2012 Share Posted June 10, 2012 Does anyone know how to adjust the 12 volt charging voltage on these generators ? When running off load or on load I am only getting about 13.2 volts, not enough to put in what has been taken out in starting the beasie, and to keep the battery charged. Maybe the battery is not down enough for it to charge any higher. You could test this by putting a known discharged battery in circuit, then your good one connected with jumper leads, once started, remove leads then see what happens. Quote Link to comment Share on other sites More sharing options...
Tony B Posted June 10, 2012 Share Posted June 10, 2012 (edited) I've been having head banging problems with a 6 volt battery latley, charger reading one thing, meter another and battery doing it's own thing. Get a Hygometer, that is the definite test on what state the battery is in. 13.2 is not a bad charging voltage, but what ampage is the battery taking? Edited June 10, 2012 by Tony B Quote Link to comment Share on other sites More sharing options...
R Cubed Posted July 26, 2013 Author Share Posted July 26, 2013 Is there anywhere in the UK that supply spares for these engines mainly after inlet / exhaust gaskets. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.