paulob1 Posted October 31, 2011 Share Posted October 31, 2011 hi guys anyone know if the genys on the stalwart actually produce 240 volt AC....and how I can get to it if it does, I know they do on theFV432, or did do...but on the stolly ones? anyone know Quote Link to comment Share on other sites More sharing options...
0 andym Posted October 31, 2011 Share Posted October 31, 2011 The FV430 AC output was 208V 400Hz if I recall correctly - not terribly useful for anything except the original power tools!Andy Quote Link to comment Share on other sites More sharing options...
0 fv1609 Posted October 31, 2011 Share Posted October 31, 2011 Some early Stalwarts & 1 Ton Rovers were fitted with altern@tors that provide a 3-phase output. These were Generators No.10 Mks A, 1, 2. It was simply a feed from the stator windings to pins P, T & R by passing the rectifier diodes. But the voltage is far too low it must be used in conjunction with the Power Tool Transformer Unit that then provides the 208v 400Hz as Andy says. The engine revs had to be kept at 2,250 Hz in order to deliver that frequency for the matching power tools also because overheating would occur as the transformer was designed for 400 Hz. Quote Link to comment Share on other sites More sharing options...
0 paulob1 Posted November 10, 2011 Author Share Posted November 10, 2011 ah okay, sounds like it will be easier to run a mini silent generator for about 3 kva.... Quote Link to comment Share on other sites More sharing options...
0 Grumpy Posted November 10, 2011 Share Posted November 10, 2011 ah okay, sounds like it will be easier to run a mini silent generator for about 3 kva.... 24v - 240v inverter? Quote Link to comment Share on other sites More sharing options...
Question
paulob1
hi guys anyone know if the genys on the stalwart actually produce 240 volt AC....and how I can get to it if it does, I know they do on theFV432, or did do...but on the stolly ones? anyone know
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.