john wheatley (R.I.P.) Posted June 25, 2010 Share Posted June 25, 2010 Just a bit of info. have had to replace the water temp. gauge in Bertha and have found the most helpful man in the Kent area and have no hesitation in letting you know his name. Alan Davis, he can be contacted at alandavis@thegaugeshop.com 01732 838528 Regards, John Quote Link to comment Share on other sites More sharing options...
Tony B Posted June 26, 2010 Share Posted June 26, 2010 Tahnks mate. Nice to know a local place. Quote Link to comment Share on other sites More sharing options...
Markheliops Posted June 26, 2010 Share Posted June 26, 2010 Ta John - very usuefull. Do you know if he can do anything with tachos? I had a mechanical one fitted to the Ward which ran off the dizzy but have no dizzy now and need to sort something. I'll give him a tinkle. Regards Markheliops Quote Link to comment Share on other sites More sharing options...
N.O.S. Posted June 26, 2010 Share Posted June 26, 2010 Mark, there should be a tacho drive take-off point on the front of the B Series timing cover, on left hand side in line with fuel pump drive. A little plastic drive adaptor fits over the lock nut for the pump drive gear, to take a tacho drive cable or electric sender unit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.