JeffG Posted July 7, 2022 Share Posted July 7, 2022 Can someone explain the route of the winch cable when used at the front of the vehicle, I know it has guide rollers on the left front chassis, but it is from the rear near side drum to the front regards jeff Quote Link to comment Share on other sites More sharing options...
0 Nick Johns Posted July 7, 2022 Share Posted July 7, 2022 (edited) . Edited July 15, 2022 by Nick Johns Quote Link to comment Share on other sites More sharing options...
0 CMP-Phil Posted July 9, 2022 Share Posted July 9, 2022 On 7/7/2022 at 6:17 AM, Nick Johns said: the Morris Quad has Two pulley wheels to the side of the Rear winch rollers to redirect the winch cable 180 degress down the side of the chassis to the front fairlead guide rollers, ..as per photo in link below https://www.alamy.com/stock-photo-wwii-re-enactment-morris-commercial-c8-quad-artillery-tractor-unit-31336808.html Hi - Found this link interesting, and also a lesson in be-careful of what you find on the internet. Did anybody else note the miss-identification of the CMP CGT as "WWII re-enactment. Morris Commercial C8 Quad Artillery Tractor Unit Festival of History 2010, Kelmarsh Hall, Northamptonshire." Cheers Phil Quote Link to comment Share on other sites More sharing options...
0 JeffG Posted July 10, 2022 Author Share Posted July 10, 2022 Has anyone got a photo of the position of the two pulley wheels that direct the cable 180 degrees to the front regards jeff Quote Link to comment Share on other sites More sharing options...
0 Richard Farrant Posted July 10, 2022 Share Posted July 10, 2022 37 minutes ago, JeffG said: Has anyone got a photo of the position of the two pulley wheels that direct the cable 180 degrees to the front regards jeff Not a photo, but an illustration from the manual. regards, Richard Quote Link to comment Share on other sites More sharing options...
0 JeffG Posted July 11, 2022 Author Share Posted July 11, 2022 Many thanks Richard, yes I have that illustration in my manual, it is the route the cable takes once it leaves the near side (left) pulley on its way to the front, there must be at least two more pulleys or fare leads to direct the cable down to chassis height and then to the front cable rollers regards jeff Quote Link to comment Share on other sites More sharing options...
Question
JeffG
Can someone explain the route of the winch cable when used at the front of the vehicle, I know it has guide rollers on the left front chassis, but it is from the rear near side drum to the front
regards jeff
Link to comment
Share on other sites
5 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.