Ferret part identification

[teletech]

I've got a couple small bits I can't figure out, I'm sure they are obvious but here goes:

[wally dugan]

the two rods  are from the battery box and are for fixing the lid down and holding the lower box in place 

[teletech]

2 hours ago, wally dugan said:

the two rods  are from the battery box and are for fixing the lid down and holding the lower box in place 

That's what I thought and now that I look again it's obvious.  I kept looking at the front of the tray was my mistake.  OK, so these hold the back of the box, what holds the front of the box?

 

Thanks,

[wally dugan]

The boxes have two  of these if you lift the box out you will see two hole at each end in the frame the box sits in these holes mate up with the holes in the bracket when the box that the battery sits in is fitted the lid is screwed  down and is held in place so it cannot move l assume you do have the boxes and lids

[sirhc]

[teletech]

 

27 minutes ago, wally dugan said:

The boxes have two  of these if you lift the box out you will see two hole at each end in the frame the box sits in these holes mate up with the holes in the bracket when the box that the battery sits in is fitted the lid is screwed  down and is held in place so it cannot move l assume you do have the boxes and lids

I do have a box, but I really don't see a place to attach the front hold-down.  It looks like there might be a spot to attach something to the back of the gearbox side trunnion but there isn't space for it to be these.

[robin craig]

Have you looked at your parts manual?

[teletech]

On 12/6/2020 at 5:17 PM, robin craig said:

Have you looked at your parts manual?

I dearly wish I had one, but not sure where to get it.  I have several chapters in digital format but not wherever the battery box is covered.

[sirhc]

7 hours ago, teletech said:

I dearly wish I had one, but not sure where to get it.  I have several chapters in digital format but not wherever the battery box is covered.

https://www.greenmachinesurplus.com/daimler-ferretillustrated-spare-parts-list-144-p.asp

[ltwtbarmy]

If I understand correctly, the relevant section has the parts breakdown, but no illustration of the battery box and components. Page L29 refers -

http://daimlerferret.co.uk/wp-content/uploads/2018/01/ISpP-List-Part-L-Electrical.pdf

This is a link which has the parts catalogue in its entirety-

http://daimlerferret.co.uk/manuals-and-emers

 

Edited December 8, 2020 by ltwtbarmy

[teletech]

2 hours ago, ltwtbarmy said:

If I understand correctly, the relevant section has the parts breakdown, but no illustration of the battery box and components. Page L29 refers -

http://daimlerferret.co.uk/wp-content/uploads/2018/01/ISpP-List-Part-L-Electrical.pdf

This is a link which has the parts catalogue in its entirety-

http://daimlerferret.co.uk/manuals-and-emers

 

Thanks very much for this.  As you say, there is a parts breakdown, but no illustration.  So I'm still in the dark as to the mounting of the front post.  I might just have to cobble something up I suppose.  For simplicity sake I'm taking advantage of modern battery technology and putting them both in one box.  Handy also since I just have one box (though I do have both lids).  One more thing to add to my list of things to locate at some point, then I can use it to store spares or something.