m606paz Posted May 6, 2018 Share Posted May 6, 2018 (edited) Hi fellows I have a 1944 Ariel WNG contract number 294/23 /S.5514 Can anyone tell me the measurements you can see with letters in this drawing? Thanks in advance Edited May 6, 2018 by m606paz Quote Link to comment Share on other sites More sharing options...
bigduke6 Posted July 3, 2018 Share Posted July 3, 2018 Luis, its Geoff same Bigduke6 as on Milsurps, can't help you out on above measurements but can help out on the pannier frames you were after as I'm doing a bit of work on the Matchless this week, its all been boxed up since last year whilst waiting for some land for my new workshop still waiting for the land and as the weather is unbelievable at present I've hauled out some bits and pieces to work on. Quote Link to comment Share on other sites More sharing options...
m606paz Posted July 3, 2018 Author Share Posted July 3, 2018 Hi Geoff! How are you? Thanks for your reply and help! weeks ago at Ariel Forum share the mesurements i need! http://forum.arielownersmcc.co.uk/viewtopic.php?f=49&t=7909 About panniers rack , if you can make a drawing,It will be a great help! Thanks in advance! Regards Quote Link to comment Share on other sites More sharing options...
wdbikemad Posted July 4, 2018 Share Posted July 4, 2018 Contact Terry Roberts at Metal Magic/Heritage Motor Works at Eversley, Hants..........he makes perfect repro's of the W/NG pannier carrier............. Quote Link to comment Share on other sites More sharing options...
m606paz Posted July 12, 2018 Author Share Posted July 12, 2018 wdbikemad Thanks for your reply. The shipping to Argentina are very expensive, that's why it is difficult to buy large parts in your country. Sometimes I take the trip of a friend to the USA, who travels frequently, and I make purchases with shipment to Miami. Best regards Quote Link to comment Share on other sites More sharing options...
m606paz Posted March 18, 2020 Author Share Posted March 18, 2020 Hi Boys! Thanks to the measures shared here in the forum, I started building the rear carrier. My rear fender has missing parts, such as the hinge, which I will have to rebuild. I'm newby to iron folding and welding, so I have mistakes to correct even ... 1 Quote Link to comment Share on other sites More sharing options...
m606paz Posted March 18, 2020 Author Share Posted March 18, 2020 It still remains to finish the two short rods, but I will finish it once the rear mudguard is correctly installed Regards 1 Quote Link to comment Share on other sites More sharing options...
Ron Posted March 18, 2020 Share Posted March 18, 2020 Good job! Very well done that man👍 Ron Quote Link to comment Share on other sites More sharing options...
welbike Posted March 18, 2020 Share Posted March 18, 2020 Nice, but it will be very heavy?? originals were usually made from tubing. Cheers, Lex Quote Link to comment Share on other sites More sharing options...
m606paz Posted March 18, 2020 Author Share Posted March 18, 2020 Ron Alex, thank you for your comments! I always had the doubt if the originals were rod or tube ... So should it be done with tubes? The ends with holes seem made by forging...... My WNG should carry more weight and I should drink less beer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.