buzzer999 Posted January 14, 2021 Share Posted January 14, 2021 1 hour ago, mogmaner said: Dose this help ,will measure trailer when I can get to it. Quote Link to comment Share on other sites More sharing options...
buzzer999 Posted January 14, 2021 Share Posted January 14, 2021 Thank you but that is the trailer for the 15kVa set I remember using those as well as the Meadows. The posting that Wally has done has the specification and dimensions. Thanks again Dave Quote Link to comment Share on other sites More sharing options...
rustexpert Posted January 23, 2021 Share Posted January 23, 2021 Does any one know where I might source head gaskets for one of these Meadows 27.5kva generator engines? Any parts at all for the sets? Is there anyone with experience of working on these, would be prepared to give advice? Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted January 23, 2021 Share Posted January 23, 2021 32 minutes ago, rustexpert said: Does any one know where I might source head gaskets for one of these Meadows 27.5kva generator engines? Any parts at all for the sets? Is there anyone with experience of working on these, would be prepared to give advice? I have no idea about gaskets, but you could try John Walker near Nottingham, he does a lot of autojumbles and specialises in gaskets. I worked on these years ago and you should be aware there are some head studs that go down into the pushrod chamber so you need to remove the sidecovers to get to them. Quote Link to comment Share on other sites More sharing options...
rustexpert Posted January 23, 2021 Share Posted January 23, 2021 10 hours ago, Richard Farrant said: you should be aware there are some head studs that go down into the pushrod chamber so you need to remove the sidecovers to get to them. It did cause some head scratching when all the upward pointing fastenings were off and the heads still tight! However I removed side covers to reveal the studs you mention before being to rough to try shifting them. I will try John Walker as you suggest. Thanks. 1 Quote Link to comment Share on other sites More sharing options...
buzzer999 Posted January 27, 2021 Share Posted January 27, 2021 I have now completed the model of the Meadows generator, next I will start coverting a Dinky Bedford RL into a REME Repair Wagon. 3 Quote Link to comment Share on other sites More sharing options...
Glynne0812 Posted May 31, 2022 Share Posted May 31, 2022 Any body interested in a military meadows generator set... 1975... works well and I need it gone... Essex based I can email pics Thanks Glynne Quote Link to comment Share on other sites More sharing options...
Rangie Posted June 2, 2022 Share Posted June 2, 2022 On 5/31/2022 at 5:48 PM, Glynne0812 said: Any body interested in a military meadows generator set... 1975... works well and I need it gone... Essex based I can email pics Thanks Glynne Any Books or Manuals? Would pay for a copy or a chance to scan them. Alec. Quote Link to comment Share on other sites More sharing options...
rustexpert Posted June 9, 2022 Share Posted June 9, 2022 On 5/31/2022 at 5:48 PM, Glynne0812 said: Any body interested in a military meadows generator set... 1975... works well and I need it gone... Essex based I can email pics Thanks Glynne Would possibly be interested, does anyone know how to raise Glynne? He doesn't seem to look in here often. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.