Richard Farrant Posted November 29, 2014 Share Posted November 29, 2014 (edited) Question of the day, what is this toothed drive for on the back of the gearbox? I can only guess it powered the motors of the bofors. Martyn, That chain sprocket is odd as the alternator and exciter for the gun were driven off this shaft, by a pulley driving v-belts, so maybe it is a modification or another version. Unless this chassis has had another use in its post-service life. regards, Richard Edited November 29, 2014 by Richard Farrant spelling! Quote Link to comment Share on other sites More sharing options...
Tim Isaac Posted December 11, 2014 Share Posted December 11, 2014 Ours has a tin cover over this part, must have been used manually? Quote Link to comment Share on other sites More sharing options...
Ivor Ramsden Posted December 12, 2014 Share Posted December 12, 2014 Ours has the same cover over the PTO. There is only the flange fitted to the gearbox - no pulley or gear. The early vehicles were fitted with the alternator but I understand they were removed later in service. The guns were originally designed for electrical operation in conjunction with a predictor which was mounted in a separate vehicle but it seems that the gunners preferred manual control so the electrics were removed. The predictor vehicles were converted to gun tractors. Quote Link to comment Share on other sites More sharing options...
Adrian Barrell Posted December 12, 2014 Share Posted December 12, 2014 The Stiffkey sight proved so successful that many guns reverted to manual control. Quote Link to comment Share on other sites More sharing options...
Tim Isaac Posted December 12, 2014 Share Posted December 12, 2014 That makes sense, less weight fewer men and less to go wrong. The Stiffkey resembles a North Devon road accident, bits of hay turner, bent metal and bicycle parts! You`d think we`d have one by now. Quote Link to comment Share on other sites More sharing options...
Adrian Barrell Posted December 12, 2014 Share Posted December 12, 2014 I can well believe it with your roads! I thought the same about the Stiffkey until I looked a making one, it's quite an involved piece of equipment. Quote Link to comment Share on other sites More sharing options...
T8Hants Posted December 13, 2014 Share Posted December 13, 2014 Hi Guys I'm the owner of the Isle of Wight C9/B, and if you have seen my vids on YouTube you will know I have also put together a mangled example of the beast. Enjoy the trip Gareth Quote Link to comment Share on other sites More sharing options...
fesm_ndt Posted December 13, 2014 Share Posted December 13, 2014 this model seems to have a very detailed Stiffkey sight http://www.perthmilitarymodelling.com/reviews/vehicles/bronco/cb35028.html Quote Link to comment Share on other sites More sharing options...
MHillyard Posted January 3, 2015 Author Share Posted January 3, 2015 Only picking up the essentials :whistle: Quote Link to comment Share on other sites More sharing options...
Tim Isaac Posted March 3, 2015 Share Posted March 3, 2015 Found a C9B barrel clamp today, it`s in poor shape but may be useful to someone. Quote Link to comment Share on other sites More sharing options...
MHillyard Posted March 3, 2015 Author Share Posted March 3, 2015 Might well be interested Tim. Will send you a message when I get home. There weren't any other c9 bits there by any chance? Quote Link to comment Share on other sites More sharing options...
MHillyard Posted March 24, 2015 Author Share Posted March 24, 2015 A few little bits done Picked up a bonnet thanks to a forum member. Needs some work but a fantastic piece to either repair or copy. Also had a brief look at one of the jacks, this one had fallen off the front of the Morris some time ago and the handle has been knocked off at some point. It seems by far to be the worst jack of the lot. With a bit of effort it started to move so sprayed it with a bit of oil and got a good grip on the handle and it started to wind up and down (obviously quite stiff as it is well clogged up with rust. I removed the remains of the handle which came of pretty easily and revealed rather clean and well lubricated insides. I then removed the base to free it up so it will sit better and that all went fairly well and smoothly although I am not going to be doing any more work on the jacks or the Morris itself before the Gipsy is finished. Quote Link to comment Share on other sites More sharing options...
MHillyard Posted November 23, 2015 Author Share Posted November 23, 2015 Work has started! Decided to spend a day getting the majority of the cab off before the bad weather sets in, also gives me something to do in the evenings as work on the Gipsy is becoming more light and weather dependent. Surprisingly a lot of the bolts came undone with an oily residue on the thread which is promising. Lots of little parts to store now but at least they wont spoil. Quote Link to comment Share on other sites More sharing options...
MHillyard Posted November 24, 2015 Author Share Posted November 24, 2015 Also thanks to Adrian for the opportunity to get some Bofors tools Sent from my E5823 using Tapatalk Quote Link to comment Share on other sites More sharing options...
thedawnpatrol Posted November 24, 2015 Share Posted November 24, 2015 You have a real challenge there Martyn Glad to see you have started the strip down, don't forget to take loads of photos as you go. Did you struggle to get the steering wheel off ? Cheers Jules QUOTE=MHillyard;456162]Work has started! Decided to spend a day getting the majority of the cab off before the bad weather sets in, also gives me something to do in the evenings as work on the Gipsy is becoming more light and weather dependent. Surprisingly a lot of the bolts came undone with an oily residue on the thread which is promising. Lots of little parts to store now but at least they wont spoil. [ATTACH=CONFIG]110337[/ATTACH][ATTACH=CONFIG]110338[/ATTACH][ATTACH=CONFIG]110339[/ATTACH][ATTACH=CONFIG]110340[/ATTACH][ATTACH=CONFIG]110341[/ATTACH][ATTACH=CONFIG]110342[/ATTACH][ATTACH=CONFIG]110343[/ATTACH][ATTACH=CONFIG]110344[/ATTACH] Quote Link to comment Share on other sites More sharing options...
MHillyard Posted November 25, 2015 Author Share Posted November 25, 2015 You have a real challenge there Martyn Glad to see you have started the strip down, don't forget to take loads of photos as you go. Did you struggle to get the steering wheel off ? Cheers Jules Yes taking plenty of photos for future reference. Refacbricating the cab is going to be interesting as what I have is not much to go by. Steering wheel nut was already mostly undone so came off with very little effort at all. Shame the wheel itself is pretty shot. Sent from my E5823 using Tapatalk Quote Link to comment Share on other sites More sharing options...
MHillyard Posted December 2, 2015 Author Share Posted December 2, 2015 First parts go in primer :-D Quote Link to comment Share on other sites More sharing options...
MHillyard Posted December 8, 2015 Author Share Posted December 8, 2015 More parts cleaned up and primed including compressor oil filter, gearbox breather box and carb. A couple of questions: Does anyone know the colour code for the engine paint? Is there anywhere I can get carb gaskets or will I have to make them up? Also does anyone have a copy (preferably pdf) of the parts manual for this or the C8? Quote Link to comment Share on other sites More sharing options...
morris c8 fat Posted December 8, 2015 Share Posted December 8, 2015 I have the manual on disk Late John Weasly but its my only copy and a bit personal how far are you from Southend? Quote Link to comment Share on other sites More sharing options...
MHillyard Posted December 8, 2015 Author Share Posted December 8, 2015 I have the manual on disk Late John Weasly but its my only copy and a bit personal how far are you from Southend? Not too far, im near Colchester. Is the parts list illustrated at all or just a list? Was hoping some bits in there might help with making up new bits and pieces. Quote Link to comment Share on other sites More sharing options...
thedawnpatrol Posted December 8, 2015 Share Posted December 8, 2015 Martyn The best match for the Morris engine colour is called Brunswick Green, easily available via the net, a lot is sold to stationary engine restorers. CHEERS Jules Quote Link to comment Share on other sites More sharing options...
Ivor Ramsden Posted December 8, 2015 Share Posted December 8, 2015 The parts list isn't illustrated other than for sectional diagrams of the engine, gearbox and axles. It's nothing like the sort of thing you'll use at work so it's not much use as a basis for refabricating anything. If you need detail photos or measurements of a C9B I can help you. Quote Link to comment Share on other sites More sharing options...
MHillyard Posted December 8, 2015 Author Share Posted December 8, 2015 Martyn The best match for the Morris engine colour is called Brunswick Green, easily available via the net, a lot is sold to stationary engine restorers. CHEERS Jules Cheers! The parts list isn't illustrated other than for sectional diagrams of the engine, gearbox and axles. It's nothing like the sort of thing you'll use at work so it's not much use as a basis for refabricating anything. If you need detail photos or measurements of a C9B I can help you. Cheers Ivor, I think ive been spoiled by the fully illustrated parts list for the Gipsy. Cheers for the offer Ivor you'll probably regret saying that. I am ok for the time being but will no doubt need measurements etc. in the future especially for the cab Quote Link to comment Share on other sites More sharing options...
MHillyard Posted December 9, 2015 Author Share Posted December 9, 2015 Got cleaning up the tyre pump last night. Was well coated in grease and oil so when cleaned off it revealed a nice bit of original paint. Looks a mixture of a light/faded service brown or sand colour with traces of a green which could either be the engine colour or a late war green. Quote Link to comment Share on other sites More sharing options...
MHillyard Posted December 21, 2015 Author Share Posted December 21, 2015 Lots more taken off and cleaned up etc. over the past week. Had a closer look at the radiator and it looks pretty bad at the base, not sure how repairable things like this are so any suggestions would be appreciated Managed to remove the exhaust manifold without any damage, it seems to be pretty well seized onto the inlet manifold but that is something I will sort later along the line. Rather than taking the whole "cab" to bits I just unbolted it from the chassis and lifted it to the rear of the body where it can remain complete for when I come to work on it. The engine/gearbox subframe is in a very poor state and I am surprised the engine is still held by it. So next job is to remove the engine and gearbox. Steering mechanism removed for ease of taking the engine and gearbox out which also revealed a nice bit of paint. Also removed the engine covers and condition doesnt seem to be too bad so will have to see how it looks when I start taking it to bits. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.