BRDM Driver Posted June 5, 2014 Share Posted June 5, 2014 I've been trying to fit some airsoft L82A2 carbines into my Scorpion. Oddly, the left hand rear most clips are set to be too short for a full length rifle and too long for the carbine. The left hand front clips (behind the drivers seat) will take a full length rifle. I assume the clip is supposed to clip around the barrel and not the flash hider? My airsoft carbine is 59cm from the butt pad to the end of the fore stock, then there's 5.5cm of barrel (just right for the clip to go in) and then 7.5cm of flash hider. Should there be any packing in the bottom holder where the stock goes? If there was about 3cm of padding the carbine would fit in the rear mount. Confused! Quote Link to comment Share on other sites More sharing options...
Jiver Posted June 7, 2014 Share Posted June 7, 2014 Smg mounts not toy gun mounts Quote Link to comment Share on other sites More sharing options...
lowfat Posted June 7, 2014 Share Posted June 7, 2014 slr mounts perhaps Quote Link to comment Share on other sites More sharing options...
BRDM Driver Posted June 7, 2014 Author Share Posted June 7, 2014 Nope defo SA80 mounts, not toy gun mounts or slr mounts. Three, two drivers side and one on the other. Held vertically. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.