Jump to content

new to list- query on wind screen defrost- electric defrost


nomad

Recommended Posts

howdy folks:

 

New to list - 90 land rover year 86 ex military 200tdi running 99% virgin biodiesel

 

 

My windscreen has the defrost lines - have 3 tabs front of dash pad

how do I wire this - I believe center is ground?

 

is there a switch i should have this wired to ?

 

Cheers thanks

 

Peace

Link to comment
Share on other sites

I put a heated screen on my 110.

The one I bought was 12v and had only two connections.

I wired it via a relay and 30 amp fuse.

When that broke I got a 3 wire one.

I wired it with -ve to the centre and +ve to the two outer connections.

It warmed up quicker than the old one, but kept blowing the fuse.

I am currently using just the drivers side until I get around to running a heavier cable direct from the battery lead.

 

I would guess the idea of the three connections is to make it dual voltage.

Parallel for 12v, series for 24v.

Link to comment
Share on other sites

no problems as yet- careful as I sayi am using virgin biodiesel

 

Not reclaimed oil made into biodiesel. I believe there is a difference as I dont have to worry about how clean or how washed is my homebrew

 

I will try my hand at home brew as soon as I have some more time

but not sure if I will run the 200tdi on it

 

Not even a filter change as yet- but i will do a big service soon as I must change timing belt and put in my Allisport full size intercooler

 

I do notice not as much power and mileage is reduced slightly

be interesting to see if I get some deposits on injectors- here in States we get bio from Soy- not rape seed likein Europe

I believe this is why Volkswagen will not allow bio to be used and still keep warranty

Link to comment
Share on other sites

interesting - i have not heard this- what I did hear was that the 200 tdi is a mechanical injection pump so I am not sure how the injector pump would get damaged. I do know that nitrile is not a good material for Biodiesel. I wonder if the seals would get damaged from the different PH of the bio -

 

were there details from Rover?

 

I have spoken with a few guys in Canada who work with Bio home brew and 200tdi's- no warning just make sure the bio is clean so common rail does not get jammed-

 

8 months 99% - no problems- yet?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...