Savedfromscrap Posted May 13, 2013 Share Posted May 13, 2013 Hello, I am looking to order the tongue and groove to board out the sv2s with but have no idea what thickness it is meant to be? Looking at the rust marks it is 5.5" wide? but as it was all removed before my ownership I have nothing to go on. Daft question I know but if i'm going to the effort of doing it i'd rather do it right! Also I guess the floor/sides were done with the same stuff? If someone could drop a tape on theirs next time they are passing it would be much appreciated. Fingers crossed someone stocks it or it may get expensive :wow: lol Regards Ryan Quote Link to comment Share on other sites More sharing options...
Niels v Posted May 13, 2013 Share Posted May 13, 2013 Hi Ryan I can take some measurments friday. And have a look here http://hmvf.co.uk/forumvb/showthread.php?11476-Another-Pioneer&highlight=jimh Cheers Quote Link to comment Share on other sites More sharing options...
Scammell4199 Posted May 14, 2013 Share Posted May 14, 2013 I believe the rear body floor boards are 1.1/8" thick, and I wouldn't assume the sides are the same, I don't think that is the case. All the best, Richard Quote Link to comment Share on other sites More sharing options...
Savedfromscrap Posted May 14, 2013 Author Share Posted May 14, 2013 Thanks for that Richard, and would be brilliant if you could Niels- love the restoration thread. Nice job! Regards Ryan Quote Link to comment Share on other sites More sharing options...
sprockett2103 Posted November 5, 2013 Share Posted November 5, 2013 Thanks for that Richard, and would be brilliant if you could Niels- love the restoration thread. Nice job! Regards Ryan Hi Sorry to jump in on your post. what wood would have been used? I can get hold of oak or ash. thanks mark Quote Link to comment Share on other sites More sharing options...
ruggyjohn Posted November 17, 2013 Share Posted November 17, 2013 Just reboarding my scammell, used softwood as it will all be painted also cheaper and lighter than hardwood. The board size is 5.1/2 x 1.1/8 after planing, tongue and groove, I had to pay nearly a £1.00 a foot. And to replace it all you will need 600ft, screw fix cheap enough for slot headed screws, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.