Rolf S. Ask Posted February 22, 2007 Share Posted February 22, 2007 Could this be a Hillman 10 HP engine?? Looks like side vent, and no other "tilly" came with side vent engine, or did they? Anyone have Part number for tilly engines? Rolf http://img408.imageshack.us/img408/1074/hillmanenginegd4.jpg[/img] Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted February 22, 2007 Share Posted February 22, 2007 Could this be a Hillman 10 HP engine?? Looks like side vent, and no other "tilly" came with side vent engine, or did they? Anyone have Part number for tilly engines? Rolf, Definitely a Hillman 10hp engine, checked it out against a picture in the workshop manual. Here are a few army part numbers of rebuilt engines: LV7/HL/P47566 LV7/HL/P47594 LV7/HL/P47647 LV7/HL/P47734 LV7/HL/P47754 Quote Link to comment Share on other sites More sharing options...
Rolf S. Ask Posted February 22, 2007 Author Share Posted February 22, 2007 once again thanks Richard! The number I have got on the engine is : P653 50C Don't know if it is a serialnumber for the engine.. Some other partnumbers together with this: LV7/MM QA.10762 Engine Valve LV7/MM X.22050 Engine Packing (small) for water pump LV7/MM X.22548 Engine Valve inlet LV7/MM X.2255 Engine Valve guide exhaust LV7/MM X.22550 Engine Valve exhaust LV7/MM X.22551 Engine Valve guide exhaust LV7/MM X.22802 Engine Gasket for carburator LV7/MM X.22919 Engine Spring for valve 63-149 Gearbox Clutch + Gearbox casings Steering Steering arm LV7/MM 1681 Cotter axle swivel pin LV7/MM 10347 Stud nut LV7/MM 35346 Nut lock washer Do they tell you anything? I have not been able to put them into any MCC parts, nor Austin Ten parts. Have not found any numbers with LV7/HL Chers Rolf Quote Link to comment Share on other sites More sharing options...
Richard Farrant Posted February 22, 2007 Share Posted February 22, 2007 once again thanks Richard! The number I have got on the engine is : P653 50C Don't know if it is a serialnumber for the engine.. Some other partnumbers together with this: LV7/MM QA.10762 Engine Valve LV7/MM X.22050 Engine Packing (small) for water pump LV7/MM X.22548 Engine Valve inlet LV7/MM X.2255 Engine Valve guide exhaust LV7/MM X.22550 Engine Valve exhaust LV7/MM X.22551 Engine Valve guide exhaust LV7/MM X.22802 Engine Gasket for carburator LV7/MM X.22919 Engine Spring for valve 63-149 Gearbox Clutch + Gearbox casings Steering Steering arm LV7/MM 1681 Cotter axle swivel pin LV7/MM 10347 Stud nut LV7/MM 35346 Nut lock washer Do they tell you anything? I have not been able to put them into any MCC parts, nor Austin Ten parts. Have not found any numbers with LV7/HL Rolf, The numbers I gave you were for full engine assemblies, that one in your picture is not complete, so what we would call a "short engine". The number you quoted, is probably the part number, as it starts with P, as the ones I listed. 63-149 Gearbox, I think you will find that this is G3-149 "Gearbox casing with studs for front cover, bushes and greasers for clutch operating shaft, thrust washers and pad for laygear."...........for an Austin 10 Utility ! All the other numbers, LV7/MM, are Morris Motors, so are likely to be Morris 10 Utility or car. As I do not have a parts list for Morris cars, I cannot identify them. Richard Quote Link to comment Share on other sites More sharing options...
Rolf S. Ask Posted February 23, 2007 Author Share Posted February 23, 2007 Well I think I just have to wait until I get the parts home and sort them out propperly. The photo of the engine was taken 15 feets up in a wobbly bobbly ladder... and I served at a submarine and do not like the hights on a ladder... :roll: So then I got both Hillman and Austin 10 parts... hm... anyone having a project of one or the other for sale :-) Rolf Quote Link to comment Share on other sites More sharing options...
79x100 Posted February 23, 2007 Share Posted February 23, 2007 Rolf, You haven't found any beautifully engineered parts with LV7/NC labels have you ? Rich. Quote Link to comment Share on other sites More sharing options...
Rolf S. Ask Posted February 23, 2007 Author Share Posted February 23, 2007 No have not found any LV7/NC..... yet... And NC stands for what ?? :? Rolf Quote Link to comment Share on other sites More sharing options...
79x100 Posted May 9, 2008 Share Posted May 9, 2008 No have not found any LV7/NC..... yet... And NC stands for what ?? :? Rolf Sorry Rolf, missed your question at the time. NC is the Norton code. There seems to be a cluster of very late contract Nortons in Norway which were presumably supplied post-war. There are also a few 1940 frames around Narvik. I wonder how they got there ? Quote Link to comment Share on other sites More sharing options...
woa2 Posted May 9, 2008 Share Posted May 9, 2008 You haven't found any parts with LV7/FD have you? Just a long shot. Quote Link to comment Share on other sites More sharing options...
Degsy Posted May 9, 2008 Share Posted May 9, 2008 British troops were in Narvik in 1940 until evacuation in face of superior German forces. Quote Link to comment Share on other sites More sharing options...
woa2 Posted May 9, 2008 Share Posted May 9, 2008 British troops were in Narvik in 1940 until evacuation in face of superior German forces. British troops were also there in 1945 as the war ended. When they came home afterwards, vehicles were left in Norway. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.