Rover8FFR Posted May 13, 2011 Share Posted May 13, 2011 I have a Sealey 350Kg rated engine stand that has the 4 box section arms and sleeved lugs for attaching the engine too. Having now removed the engine from my lightweight the brackets / arms on the stand seem more substantial than say the studs on the flywheel castings. Can anyone share an image as to the best way to connect the engine to the stand. Does the flywheel have to come off etc? Do I need some special brackets / bolts?? All pointers gratefully received. Regards Quote Link to comment Share on other sites More sharing options...
Blackpowder44 Posted May 13, 2011 Share Posted May 13, 2011 You will need to remove the flywheel, then the boltholes used to bolt the engine to the bellhousing can be used to bolt the engine to the stand, John. Quote Link to comment Share on other sites More sharing options...
Rover8FFR Posted May 13, 2011 Author Share Posted May 13, 2011 I see. John thank you for your assistance. As the flywheel is heavily rusted it's removal is a given. I can then focus on removing all the flakey paint and replacing the core plugs etc. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.