jonesy Posted October 10, 2010 Share Posted October 10, 2010 It looks like the jeep I'll be purchasing has a pedestal mount. So in the near future, I'd like to get a .30 cal for the it. I'd prefer an imitation as they're cheaper than a deac but this VCR act states I need to be a member of a reenactment group if I have an imitation firearm. So, are there any MV clubs out there which qualify? Or should I just spend the extra cash and go for a de-ac? Thanks, Neil. Quote Link to comment Share on other sites More sharing options...
Tony B Posted October 11, 2010 Share Posted October 11, 2010 Not that I know of. Most vehicle clubs are not intrested in the extra hassle. The Group has to have a constitution, photographic mebership cards and third party liability insurance. Quote Link to comment Share on other sites More sharing options...
Chris Hall Posted October 12, 2010 Share Posted October 12, 2010 Am I correct in thinking if its painted a daft colour like orange/red/blue, the VCR act dosn't apply because its no longer trying to imitate a firearm? Hence why toys painted orange are exempt? A guy I've been helping in the US is machining new barrels for Bren L4s and he will make me 2 out of solid bar. I was hoping that painting them Orange would make them exempt from the VCR act. Quote Link to comment Share on other sites More sharing options...
chevpol Posted October 12, 2010 Share Posted October 12, 2010 its true that red orange etc painted ones are exempt, but if you repaint them to the correct colours, you would be breaking the law!!!! Mark Quote Link to comment Share on other sites More sharing options...
Chris Hall Posted October 12, 2010 Share Posted October 12, 2010 Thanks for that, I think I have a plan, I'll get him to paint them Yellow at the muzzle end and then they can simulate Blank firing barrels. Quote Link to comment Share on other sites More sharing options...
Marmite!! Posted October 12, 2010 Share Posted October 12, 2010 Thanks for that, I think I have a plan, I'll get him to paint them Yellow at the muzzle end and then they can simulate Blank firing barrels. If they are replicas of original barrels you could get done for manufacturing component parts.. just because they have not been bored out would not exempt you. That's why everyone makes their dummy spare bren barrels out of wood & there are plenty of traders selling them. Quote Link to comment Share on other sites More sharing options...
johnwardle Posted October 13, 2010 Share Posted October 13, 2010 The MVT (Miliary Vehicle Trust) quailfys as a re-enactment group, if you are not a member I suggest you check out their website at www.mvt.org for membership details. Quote Link to comment Share on other sites More sharing options...
Marmite!! Posted October 13, 2010 Share Posted October 13, 2010 (edited) The MVT (Miliary Vehicle Trust) quailfys as a re-enactment group, if you are not a member I suggest you check out their website at www.mvt.org for membership details. No they do not.. they are a Military Vehicle Club & their insurance does not cover reenactment.. read Preston's Autumn report http://www.mvt.org.uk/news.htm & http://www.mvt.org.uk/insurance.htm PLI for reenacment is one of the criteria for a legal defense (exemption) if you are in breach of the VCR Act. http://hmvf.co.uk/forumvb/showthread.php?3586-VCR-Act-2006-Guidance Edited October 13, 2010 by Marmite!! Quote Link to comment Share on other sites More sharing options...
tim gray Posted October 28, 2010 Share Posted October 28, 2010 If they are replicas of original barrels you could get done for manufacturing component parts.. just because they have not been bored out would not exempt you. That's why everyone makes their dummy spare bren barrels out of wood & there are plenty of traders selling them. Not wishing to split hairs or anything, but to be done for manufacturing parts would the materials not have to match the original specified for the original part? Re the bren barrel ive seen turned steel (solid), cast ally, wood (as mentioned), resin cast with a metal bar in it, also rubber type of stuff. All except the rubber one used original carry handle assy. Thier are still issues with the above as a replica is being created. Regards Tim Quote Link to comment Share on other sites More sharing options...
Tony B Posted October 28, 2010 Share Posted October 28, 2010 Not splitting hairs Tim. Quite correct, if it is a realistic looking firearm, material dosen't matter. Quote Link to comment Share on other sites More sharing options...
Chris Hall Posted October 28, 2010 Share Posted October 28, 2010 Its not me who is manufacturing the replica parts, its a profesional engineering company in the US, Surely no diffrent to importing a blank firer or water pistol. I'm going to email the DTI for their advice, as far I see it, there shouldn't be a problem as I am importing a imitation part, which for the sake of the VCR act, will be yellow. You can legaly own in the UK a barrel blank as it is just that, a blank, only when the chamber is reamed does it become a component part. I'm quite familiar with UK firearms law, just not the import or VCR side of things. I'll see what the DTI come back with. Quote Link to comment Share on other sites More sharing options...
N.O.S. Posted October 28, 2010 Share Posted October 28, 2010 (edited) Just make sure you talk to the right people, Chris. I chanelled my enquiry through DTI (as recommended in the official advice on imports) and was advised that I could bring in replica USAAF bombs from the USA - they even gave me the relevant Commodity Code of "XXXXX - Other items made of plastic" for the sender to declare on the documentation. The reality is of course that - if inspected - my consignment would be seized by HM Customs and destroyed. Took me the best part of 3 days on the phone (well it felt like that!!!!) to get confirmation of this. You need to seek clarification from HM Customs (not as easy as it sounds), as it is their staff who will enforce the law. Impossible to speak direct to firearms officers who take the decisions. Edited October 28, 2010 by N.O.S. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.